[PATCH AUTOSEL 6.11 24/76] PCI: Add function 0 DMA alias quirk for Glenfly Arise chip

[PATCH AUTOSEL 6.11 24/76] PCI: Add function 0 DMA alias quirk for Glenfly Arise chip

[Sasha Levin]

From: WangYuli <wangyuli@uniontech.com>

[ Upstream commit 9246b487ab3c3b5993aae7552b7a4c541cc14a49 ]

Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.

Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c      | 4 ++++
 include/linux/pci_ids.h   | 2 ++
 sound/pci/hda/hda_intel.c | 2 +-
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a2ce4e08edf5a..cc6c82c3bd3d0 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4246,6 +4246,10 @@ static void quirk_dma_func0_alias(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias);
 
+/* Some Glenfly chips use function 0 as the PCIe Requester ID for DMA */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GLENFLY, 0x3d40, quirk_dma_func0_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GLENFLY, 0x3d41, quirk_dma_func0_alias);
+
 static void quirk_dma_func1_alias(struct pci_dev *dev)
 {
 	if (PCI_FUNC(dev->devfn) != 1)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index e388c8b1cbc27..2c94d4004dd50 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2661,6 +2661,8 @@
 #define PCI_DEVICE_ID_DCI_PCCOM8	0x0002
 #define PCI_DEVICE_ID_DCI_PCCOM2	0x0004
 
+#define PCI_VENDOR_ID_GLENFLY		0x6766
+
 #define PCI_VENDOR_ID_INTEL		0x8086
 #define PCI_DEVICE_ID_INTEL_EESSC	0x0008
 #define PCI_DEVICE_ID_INTEL_HDA_CML_LP	0x02c8
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 97d33a48ff17c..c98b1821b0620 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2679,7 +2679,7 @@ static const struct pci_device_id azx_ids[] = {
 	  .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS |
 	  AZX_DCAPS_PM_RUNTIME },
 	/* GLENFLY */
-	{ PCI_DEVICE(0x6766, PCI_ANY_ID),
+	{ PCI_DEVICE(PCI_VENDOR_ID_GLENFLY, PCI_ANY_ID),
 	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
 	  .class_mask = 0xffffff,
 	  .driver_data = AZX_DRIVER_GFHDMI | AZX_DCAPS_POSFIX_LPIB |
-- 
2.43.0

[PATCH AUTOSEL 6.11 27/76] PCI: Add ACS quirk for Qualcomm SA8775P

[Sasha Levin]

From: Subramanian Ananthanarayanan <quic_skananth@quicinc.com>

[ Upstream commit 026f84d3fa62d215b11cbeb5a5d97df941e93b5c ]

The Qualcomm SA8775P root ports don't advertise an ACS capability, but they
do provide ACS-like features to disable peer transactions and validate bus
numbers in requests.

Thus, add an ACS quirk for the SA8775P.

Link: https://lore.kernel.org/linux-pci/20240906052228.1829485-1-quic_skananth@quicinc.com
Signed-off-by: Subramanian Ananthanarayanan <quic_skananth@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index cc6c82c3bd3d0..8502f8a27f239 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5074,6 +5074,8 @@ static const struct pci_dev_acs_enabled {
 	/* QCOM QDF2xxx root ports */
 	{ PCI_VENDOR_ID_QCOM, 0x0400, pci_quirk_qcom_rp_acs },
 	{ PCI_VENDOR_ID_QCOM, 0x0401, pci_quirk_qcom_rp_acs },
+	/* QCOM SA8775P root port */
+	{ PCI_VENDOR_ID_QCOM, 0x0115, pci_quirk_qcom_rp_acs },
 	/* HXT SD4800 root ports. The ACS design is same as QCOM QDF2xxx */
 	{ PCI_VENDOR_ID_HXT, 0x0401, pci_quirk_qcom_rp_acs },
 	/* Intel PCH root ports */
-- 
2.43.0

[PATCH AUTOSEL 6.11 29/76] PCI: Mark Creative Labs EMU20k2 INTx masking as broken

[Sasha Levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit 2910306655a7072640021563ec9501bfa67f0cb1 ]

Per user reports, the Creative Labs EMU20k2 (Sound Blaster X-Fi
Titanium Series) generates spurious interrupts when used with
vfio-pci unless DisINTx masking support is disabled.

Thus, quirk the device to mark INTx masking as broken.

Closes: https://lore.kernel.org/all/VI1PR10MB8207C507DB5420AB4C7281E0DB9A2@VI1PR10MB8207.EURPRD10.PROD.OUTLOOK.COM
Link: https://lore.kernel.org/linux-pci/20240912215331.839220-1-alex.williamson@redhat.com
Reported-by: zdravko delineshev <delineshev@outlook.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 8502f8a27f239..9e4f8d06e2778 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3608,6 +3608,8 @@ DECLARE_PCI_FIXUP_FINAL(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
 			quirk_broken_intx_masking);
 DECLARE_PCI_FIXUP_FINAL(0x1b7c, 0x0004, /* Ceton InfiniTV4 */
 			quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K2,
+			quirk_broken_intx_masking);
 
 /*
  * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10)
-- 
2.43.0

[PATCH AUTOSEL 6.11 33/76] ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition

[Sasha Levin]

From: Kaixin Wang <kxwang23@m.fudan.edu.cn>

[ Upstream commit e51aded92d42784313ba16c12f4f88cc4f973bbb ]

In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev
function, then &sndev->check_link_status_work is bound with
check_link_status_work. switchtec_ntb_link_notification may be called
to start the work.

If we remove the module which will call switchtec_ntb_remove to make
cleanup, it will free sndev through kfree(sndev), while the work
mentioned above will be used. The sequence of operations that may lead
to a UAF bug is as follows:

CPU0                                 CPU1

                        | check_link_status_work
switchtec_ntb_remove    |
kfree(sndev);           |
                        | if (sndev->link_force_down)
                        | // use sndev

Fix it by ensuring that the work is canceled before proceeding with
the cleanup in switchtec_ntb_remove.

Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
index 31946387badf0..ad1786be2554b 100644
--- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
+++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
@@ -1554,6 +1554,7 @@ static void switchtec_ntb_remove(struct device *dev)
 	switchtec_ntb_deinit_db_msg_irq(sndev);
 	switchtec_ntb_deinit_shared_mw(sndev);
 	switchtec_ntb_deinit_crosslink(sndev);
+	cancel_work_sync(&sndev->check_link_status_work);
 	kfree(sndev);
 	dev_info(dev, "ntb device unregistered\n");
 }
-- 
2.43.0

[PATCH AUTOSEL 6.11 40/76] PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region

[Sasha Levin]

From: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>

[ Upstream commit 10ba0854c5e6165b58e17bda5fb671e729fecf9e ]

PARF hardware block which is a wrapper on top of DWC PCIe controller
mirrors the DBI and ATU register space. It uses PARF_SLV_ADDR_SPACE_SIZE
register to get the size of the memory block to be mirrored and uses
PARF_DBI_BASE_ADDR, PARF_ATU_BASE_ADDR registers to determine the base
address of DBI and ATU space inside the memory block that is being
mirrored.

When a memory region which is located above the SLV_ADDR_SPACE_SIZE
boundary is used for BAR region then there could be an overlap of DBI and
ATU address space that is getting mirrored and the BAR region. This
results in DBI and ATU address space contents getting updated when a PCIe
function driver tries updating the BAR/MMIO memory region. Reference
memory map of the PCIe memory region with DBI and ATU address space
overlapping BAR region is as below.

                        |---------------|
                        |               |
                        |               |
        ------- --------|---------------|
           |       |    |---------------|
           |       |    |       DBI     |
           |       |    |---------------|---->DBI_BASE_ADDR
           |       |    |               |
           |       |    |               |
           |    PCIe    |               |---->2*SLV_ADDR_SPACE_SIZE
           |    BAR/MMIO|---------------|
           |    Region  |       ATU     |
           |       |    |---------------|---->ATU_BASE_ADDR
           |       |    |               |
        PCIe       |    |---------------|
        Memory     |    |       DBI     |
        Region     |    |---------------|---->DBI_BASE_ADDR
           |       |    |               |
           |    --------|               |
           |            |               |---->SLV_ADDR_SPACE_SIZE
           |            |---------------|
           |            |       ATU     |
           |            |---------------|---->ATU_BASE_ADDR
           |            |               |
           |            |---------------|
           |            |       DBI     |
           |            |---------------|---->DBI_BASE_ADDR
           |            |               |
           |            |               |
        ----------------|---------------|
                        |               |
                        |               |
                        |               |
                        |---------------|

Currently memory region beyond the SLV_ADDR_SPACE_SIZE boundary is not
used for BAR region which is why the above mentioned issue is not
encountered. This issue is discovered as part of internal testing when we
tried moving the BAR region beyond the SLV_ADDR_SPACE_SIZE boundary. Hence
we are trying to fix this.

As PARF hardware block mirrors DBI and ATU register space after every
PARF_SLV_ADDR_SPACE_SIZE (default 0x1000000) boundary multiple, program
maximum possible size to this register by writing 0x80000000 to it(it
considers only powers of 2 as values) to avoid mirroring DBI and ATU to
BAR/MMIO region. Write the physical base address of DBI and ATU register
blocks to PARF_DBI_BASE_ADDR (default 0x0) and PARF_ATU_BASE_ADDR (default
0x1000) respectively to make sure DBI and ATU blocks are at expected
memory locations.

The register offsets PARF_DBI_BASE_ADDR_V2, PARF_SLV_ADDR_SPACE_SIZE_V2
and PARF_ATU_BASE_ADDR are applicable for platforms that use Qcom IP
rev 1.9.0, 2.7.0 and 2.9.0. PARF_DBI_BASE_ADDR_V2 and
PARF_SLV_ADDR_SPACE_SIZE_V2 are applicable for Qcom IP rev 2.3.3.
PARF_DBI_BASE_ADDR and PARF_SLV_ADDR_SPACE_SIZE are applicable for Qcom
IP rev 1.0.0, 2.3.2 and 2.4.0. Update init()/post_init() functions of the
respective Qcom IP versions to program applicable PARF_DBI_BASE_ADDR,
PARF_SLV_ADDR_SPACE_SIZE and PARF_ATU_BASE_ADDR register offsets. Update
the SLV_ADDR_SPACE_SZ macro to 0x80000000 to set highest bit in
PARF_SLV_ADDR_SPACE_SIZE register.

Cache DBI and iATU physical addresses in 'struct dw_pcie' so that
pcie_qcom.c driver can program these addresses in the PARF_DBI_BASE_ADDR
and PARF_ATU_BASE_ADDR registers.

Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/linux-pci/20240814220338.1969668-1-quic_pyarlaga@quicinc.com
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-designware.c |  2 +
 drivers/pci/controller/dwc/pcie-designware.h |  2 +
 drivers/pci/controller/dwc/pcie-qcom.c       | 72 ++++++++++++++++----
 3 files changed, 61 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 1b5aba1f0c92f..bc3a5d6b01779 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -112,6 +112,7 @@ int dw_pcie_get_resources(struct dw_pcie *pci)
 		pci->dbi_base = devm_pci_remap_cfg_resource(pci->dev, res);
 		if (IS_ERR(pci->dbi_base))
 			return PTR_ERR(pci->dbi_base);
+		pci->dbi_phys_addr = res->start;
 	}
 
 	/* DBI2 is mainly useful for the endpoint controller */
@@ -134,6 +135,7 @@ int dw_pcie_get_resources(struct dw_pcie *pci)
 			pci->atu_base = devm_ioremap_resource(pci->dev, res);
 			if (IS_ERR(pci->atu_base))
 				return PTR_ERR(pci->atu_base);
+			pci->atu_phys_addr = res->start;
 		} else {
 			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
 		}
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 53c4c8f399c88..e518f81ea80cd 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -407,8 +407,10 @@ struct dw_pcie_ops {
 struct dw_pcie {
 	struct device		*dev;
 	void __iomem		*dbi_base;
+	resource_size_t		dbi_phys_addr;
 	void __iomem		*dbi_base2;
 	void __iomem		*atu_base;
+	resource_size_t		atu_phys_addr;
 	size_t			atu_size;
 	u32			num_ib_windows;
 	u32			num_ob_windows;
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 6f953e32d9907..0b3020c7a50a4 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -45,6 +45,7 @@
 #define PARF_PHY_REFCLK				0x4c
 #define PARF_CONFIG_BITS			0x50
 #define PARF_DBI_BASE_ADDR			0x168
+#define PARF_SLV_ADDR_SPACE_SIZE		0x16c
 #define PARF_MHI_CLOCK_RESET_CTRL		0x174
 #define PARF_AXI_MSTR_WR_ADDR_HALT		0x178
 #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
@@ -52,8 +53,13 @@
 #define PARF_LTSSM				0x1b0
 #define PARF_SID_OFFSET				0x234
 #define PARF_BDF_TRANSLATE_CFG			0x24c
-#define PARF_SLV_ADDR_SPACE_SIZE		0x358
+#define PARF_DBI_BASE_ADDR_V2			0x350
+#define PARF_DBI_BASE_ADDR_V2_HI		0x354
+#define PARF_SLV_ADDR_SPACE_SIZE_V2		0x358
+#define PARF_SLV_ADDR_SPACE_SIZE_V2_HI		0x35c
 #define PARF_NO_SNOOP_OVERIDE			0x3d4
+#define PARF_ATU_BASE_ADDR			0x634
+#define PARF_ATU_BASE_ADDR_HI			0x638
 #define PARF_DEVICE_TYPE			0x1000
 #define PARF_BDF_TO_SID_TABLE_N			0x2000
 #define PARF_BDF_TO_SID_CFG			0x2c00
@@ -108,7 +114,7 @@
 #define PHY_RX0_EQ(x)				FIELD_PREP(GENMASK(26, 24), x)
 
 /* PARF_SLV_ADDR_SPACE_SIZE register value */
-#define SLV_ADDR_SPACE_SZ			0x10000000
+#define SLV_ADDR_SPACE_SZ			0x80000000
 
 /* PARF_MHI_CLOCK_RESET_CTRL register fields */
 #define AHB_CLK_EN				BIT(0)
@@ -325,6 +331,50 @@ static void qcom_pcie_clear_hpc(struct dw_pcie *pci)
 	dw_pcie_dbi_ro_wr_dis(pci);
 }
 
+static void qcom_pcie_configure_dbi_base(struct qcom_pcie *pcie)
+{
+	struct dw_pcie *pci = pcie->pci;
+
+	if (pci->dbi_phys_addr) {
+		/*
+		 * PARF_DBI_BASE_ADDR register is in CPU domain and require to
+		 * be programmed with CPU physical address.
+		 */
+		writel(lower_32_bits(pci->dbi_phys_addr), pcie->parf +
+							PARF_DBI_BASE_ADDR);
+		writel(SLV_ADDR_SPACE_SZ, pcie->parf +
+						PARF_SLV_ADDR_SPACE_SIZE);
+	}
+}
+
+static void qcom_pcie_configure_dbi_atu_base(struct qcom_pcie *pcie)
+{
+	struct dw_pcie *pci = pcie->pci;
+
+	if (pci->dbi_phys_addr) {
+		/*
+		 * PARF_DBI_BASE_ADDR_V2 and PARF_ATU_BASE_ADDR registers are
+		 * in CPU domain and require to be programmed with CPU
+		 * physical addresses.
+		 */
+		writel(lower_32_bits(pci->dbi_phys_addr), pcie->parf +
+							PARF_DBI_BASE_ADDR_V2);
+		writel(upper_32_bits(pci->dbi_phys_addr), pcie->parf +
+						PARF_DBI_BASE_ADDR_V2_HI);
+
+		if (pci->atu_phys_addr) {
+			writel(lower_32_bits(pci->atu_phys_addr), pcie->parf +
+							PARF_ATU_BASE_ADDR);
+			writel(upper_32_bits(pci->atu_phys_addr), pcie->parf +
+							PARF_ATU_BASE_ADDR_HI);
+		}
+
+		writel(0x0, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_V2);
+		writel(SLV_ADDR_SPACE_SZ, pcie->parf +
+					PARF_SLV_ADDR_SPACE_SIZE_V2_HI);
+	}
+}
+
 static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;
@@ -541,8 +591,7 @@ static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie)
 
 static int qcom_pcie_post_init_1_0_0(struct qcom_pcie *pcie)
 {
-	/* change DBI base address */
-	writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
+	qcom_pcie_configure_dbi_base(pcie);
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		u32 val = readl(pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT);
@@ -629,8 +678,7 @@ static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
 	val &= ~PHY_TEST_PWR_DOWN;
 	writel(val, pcie->parf + PARF_PHY_CTRL);
 
-	/* change DBI base address */
-	writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
+	qcom_pcie_configure_dbi_base(pcie);
 
 	/* MAC PHY_POWERDOWN MUX DISABLE  */
 	val = readl(pcie->parf + PARF_SYS_CTRL);
@@ -812,13 +860,11 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
 	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	u32 val;
 
-	writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
-
 	val = readl(pcie->parf + PARF_PHY_CTRL);
 	val &= ~PHY_TEST_PWR_DOWN;
 	writel(val, pcie->parf + PARF_PHY_CTRL);
 
-	writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
+	qcom_pcie_configure_dbi_atu_base(pcie);
 
 	writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS
 		| SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS |
@@ -914,8 +960,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 	val &= ~PHY_TEST_PWR_DOWN;
 	writel(val, pcie->parf + PARF_PHY_CTRL);
 
-	/* change DBI base address */
-	writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
+	qcom_pcie_configure_dbi_atu_base(pcie);
 
 	/* MAC PHY_POWERDOWN MUX DISABLE  */
 	val = readl(pcie->parf + PARF_SYS_CTRL);
@@ -1124,14 +1169,11 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
 	u32 val;
 	int i;
 
-	writel(SLV_ADDR_SPACE_SZ,
-		pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
-
 	val = readl(pcie->parf + PARF_PHY_CTRL);
 	val &= ~PHY_TEST_PWR_DOWN;
 	writel(val, pcie->parf + PARF_PHY_CTRL);
 
-	writel(0, pcie->parf + PARF_DBI_BASE_ADDR);
+	qcom_pcie_configure_dbi_atu_base(pcie);
 
 	writel(DEVICE_TYPE_RC, pcie->parf + PARF_DEVICE_TYPE);
 	writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN,
-- 
2.43.0

[PATCH AUTOSEL 6.11 41/76] PCI: endpoint: Assign PCI domain number for endpoint controllers

[Sasha Levin]

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

[ Upstream commit 0328947c50324cf4b2d8b181bf948edb8101f59f ]

Right now, PCI endpoint subsystem doesn't assign PCI domain number for the
PCI endpoint controllers. But this domain number could be useful to the EPC
drivers to uniquely identify each controller based on the hardware instance
when there are multiple ones present in an SoC (even multiple RC/EP).

So let's make use of the existing pci_bus_find_domain_nr() API to allocate
domain numbers based on either devicetree (linux,pci-domain) property or
dynamic domain number allocation scheme.

It should be noted that the domain number allocated by this API will be
based on both RC and EP controllers in a SoC. If the 'linux,pci-domain' DT
property is present, then the domain number represents the actual hardware
instance of the PCI endpoint controller. If not, then the domain number
will be allocated based on the PCI EP/RC controller probe order.

If the architecture doesn't support CONFIG_PCI_DOMAINS_GENERIC (rare), then
currently a warning is thrown to indicate that the architecture specific
implementation is needed.

Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-5-263a385fbbcb@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/endpoint/pci-epc-core.c | 14 ++++++++++++++
 include/linux/pci-epc.h             |  2 ++
 2 files changed, 16 insertions(+)

diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index 84309dfe0c684..085a2de8b923d 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -838,6 +838,10 @@ void pci_epc_destroy(struct pci_epc *epc)
 {
 	pci_ep_cfs_remove_epc_group(epc->group);
 	device_unregister(&epc->dev);
+
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+	pci_bus_release_domain_nr(NULL, &epc->dev);
+#endif
 }
 EXPORT_SYMBOL_GPL(pci_epc_destroy);
 
@@ -900,6 +904,16 @@ __pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
 	epc->dev.release = pci_epc_release;
 	epc->ops = ops;
 
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+	epc->domain_nr = pci_bus_find_domain_nr(NULL, dev);
+#else
+	/*
+	 * TODO: If the architecture doesn't support generic PCI
+	 * domains, then a custom implementation has to be used.
+	 */
+	WARN_ONCE(1, "This architecture doesn't support generic PCI domains\n");
+#endif
+
 	ret = dev_set_name(&epc->dev, "%s", dev_name(dev));
 	if (ret)
 		goto put_dev;
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index 85bdf2adb7607..8e3dcac55dcd5 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -128,6 +128,7 @@ struct pci_epc_mem {
  * @group: configfs group representing the PCI EPC device
  * @lock: mutex to protect pci_epc ops
  * @function_num_map: bitmap to manage physical function number
+ * @domain_nr: PCI domain number of the endpoint controller
  * @init_complete: flag to indicate whether the EPC initialization is complete
  *                 or not
  */
@@ -145,6 +146,7 @@ struct pci_epc {
 	/* mutex to protect against concurrent access of EP controller */
 	struct mutex			lock;
 	unsigned long			function_num_map;
+	int				domain_nr;
 	bool				init_complete;
 };
 
-- 
2.43.0