[PATCH v6 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()

[PATCH v6 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()

[Frank Li]

== RC side:

            ┌─────────┐                    ┌────────────┐
 ┌─────┐    │         │ IA: 0x8ff8_0000    │            │
 │ CPU ├───►│   ┌────►├─────────────────┐  │ PCI        │
 └─────┘    │   │     │ IA: 0x8ff0_0000 │  │            │
  CPU Addr  │   │  ┌─►├─────────────┐   │  │ Controller │
0x7ff8_0000─┼───┘  │  │             │   │  │            │
            │      │  │             │   │  │            │   PCI Addr
0x7ff0_0000─┼──────┘  │             │   └──► IOSpace   ─┼────────────►
            │         │             │      │            │    0
0x7000_0000─┼────────►├─────────┐   │      │            │
            └─────────┘         │   └──────► CfgSpace  ─┼────────────►
             BUS Fabric         │          │            │    0
                                │          │            │
                                └──────────► MemSpace  ─┼────────────►
                        IA: 0x8000_0000    │            │  0x8000_0000
                                           └────────────┘

Current dwc implimemnt, pci_fixup_addr() call back is needed when bus
fabric convert cpu address before send to PCIe controller.

    bus@5f000000 {
            compatible = "simple-bus";
            #address-cells = <1>;
            #size-cells = <1>;
            ranges = <0x80000000 0x0 0x70000000 0x10000000>;

            pcie@5f010000 {
                    compatible = "fsl,imx8q-pcie";
                    reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
                    reg-names = "dbi", "config";
                    #address-cells = <3>;
                    #size-cells = <2>;
                    device_type = "pci";
                    bus-range = <0x00 0xff>;
                    ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
                             <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
            ...
            };
    };

Device tree already can descript all address translate. Some hardware
driver implement fixup function by mask some bits of cpu address. Last
pci-imx6.c are little bit better by fetch memory resource's offset to do
fixup.

static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
{
	...
	entry = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
	return cpu_addr - entry->offset;
}

But it is not good by using IORESOURCE_MEM to fix up io/cfg address map
although address translate is the same as IORESOURCE_MEM.

This patches to fetch untranslate range information for PCIe controller
(pcie@5f010000: ranges). So current config ATU without cpu_fixup_addr().

== EP side:

                   Endpoint
  ┌───────────────────────────────────────────────┐
  │                             pcie-ep@5f010000  │
  │                             ┌────────────────┐│
  │                             │   Endpoint     ││
  │                             │   PCIe         ││
  │                             │   Controller   ││
  │           bus@5f000000      │                ││
  │           ┌──────────┐      │                ││
  │           │          │ Outbound Transfer     ││
  │┌─────┐    │  Bus     ┼─────►│ ATU  ──────────┬┬─────►
  ││     │    │  Fabric  │Bus   │                ││PCI Addr
  ││ CPU ├───►│          │Addr  │                ││0xA000_0000
  ││     │CPU │          │0x8000_0000            ││
  │└─────┘Addr└──────────┘      │                ││
  │       0x7000_0000           └────────────────┘│
  └───────────────────────────────────────────────┘

bus@5f000000 {
        compatible = "simple-bus";
        ranges = <0x80000000 0x0 0x70000000 0x10000000>;

        pcie-ep@5f010000 {
                reg = <0x5f010000 0x00010000>,
                      <0x80000000 0x10000000>;
                reg-names = "dbi", "addr_space";
                ...                ^^^^
        };
        ...
};

Add `bus_addr_base` to configure the outbound window address for CPU write.
The BUS fabric generally passes the same address to the PCIe EP controller,
but some BUS fabrics convert the address before sending it to the PCIe EP
controller.

Above diagram, CPU write data to outbound windows address 0x7000_0000,
Bus fabric convert it to 0x8000_0000. ATU should use BUS address
0x8000_0000 as input address and convert to PCI address 0xA000_0000.

Previously, `cpu_addr_fixup()` was used to handle address conversion. Now,
the device tree provides this information.

The both pave the road to eliminate ugle cpu_fixup_addr() callback function.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v6:
- merge RC and EP to one thread!
- Link to v5: https://lore.kernel.org/r/20241015-pci_fixup_addr-v5-0-ced556c85270@nxp.com

Changes in v5:
- update address order in diagram patches.
- remove confused 0x5f00_0000 range
- update patch1's commit message.
- Link to v4: https://lore.kernel.org/r/20241008-pci_fixup_addr-v4-0-25e5200657bc@nxp.com

Changes in v4:
- Improve commit message by add driver source code path.
- Link to v3: https://lore.kernel.org/r/20240930-pci_fixup_addr-v3-0-80ee70352fc7@nxp.com

Changes in v3:
- see each patch
- Link to v2: https://lore.kernel.org/r/20240926-pci_fixup_addr-v2-0-e4524541edf4@nxp.com

Changes in v2:
- see each patch
- Link to v1: https://lore.kernel.org/r/20240924-pci_fixup_addr-v1-0-57d14a91ec4f@nxp.com

---
Frank Li (7):
      of: address: Add parent_bus_addr to struct of_pci_range
      PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
      PCI: dwc: ep: Add bus_addr_base for outbound window
      PCI: imx6: Remove cpu_addr_fixup()
      dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
      PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()
      PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support

 .../devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml | 38 ++++++++++++++++-
 drivers/of/address.c                               |  2 +
 drivers/pci/controller/dwc/pci-imx6.c              | 46 ++++++++++----------
 drivers/pci/controller/dwc/pcie-designware-ep.c    | 21 +++++++++-
 drivers/pci/controller/dwc/pcie-designware-host.c  | 49 ++++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-designware.h       |  9 ++++
 include/linux/of_address.h                         |  1 +
 7 files changed, 143 insertions(+), 23 deletions(-)
---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20240924-pci_fixup_addr-a8568f9bbb34

Best regards,
---
Frank Li <Frank.Li@nxp.com>

[PATCH v6 1/7] of: address: Add parent_bus_addr to struct of_pci_range

[Frank Li]

Introduce field 'parent_bus_addr' in struct of_pci_range to retrieve parent
bus address information.

Refer to the diagram below to understand that the bus fabric in some
systems (like i.MX8QXP) does not use a 1:1 address map between input and
output.

Currently, many controller drivers use .cpu_addr_fixup() callback hardcodes
that translation in the code, e.g., "cpu_addr & CDNS_PLAT_CPU_TO_BUS_ADDR"
(drivers/pci/controller/cadence/pcie-cadence-plat.c),
"cpu_addr + BUS_IATU_OFFSET"(drivers/pci/controller/dwc/pcie-intel-gw.c),
etc, even though those translations *should* be described via DT.

The .cpu_addr_fixup() can be eliminated if DT correct reflect hardware
behavior and driver use 'parent_bus_addr' in struct of_pci_range.

            ┌─────────┐                    ┌────────────┐
 ┌─────┐    │         │ IA: 0x8ff8_0000    │            │
 │ CPU ├───►│   ┌────►├─────────────────┐  │ PCI        │
 └─────┘    │   │     │ IA: 0x8ff0_0000 │  │            │
  CPU Addr  │   │  ┌─►├─────────────┐   │  │ Controller │
0x7ff8_0000─┼───┘  │  │             │   │  │            │
            │      │  │             │   │  │            │   PCI Addr
0x7ff0_0000─┼──────┘  │             │   └──► IOSpace   ─┼────────────►
            │         │             │      │            │    0
0x7000_0000─┼────────►├─────────┐   │      │            │
            └─────────┘         │   └──────► CfgSpace  ─┼────────────►
             BUS Fabric         │          │            │    0
                                │          │            │
                                └──────────► MemSpace  ─┼────────────►
                        IA: 0x8000_0000    │            │  0x8000_0000
                                           └────────────┘

bus@5f000000 {
        compatible = "simple-bus";
        #address-cells = <1>;
        #size-cells = <1>;
        ranges = <0x80000000 0x0 0x70000000 0x10000000>;

        pcie@5f010000 {
                compatible = "fsl,imx8q-pcie";
                reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
                reg-names = "dbi", "config";
                #address-cells = <3>;
                #size-cells = <2>;
                device_type = "pci";
                bus-range = <0x00 0xff>;
                ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
                         <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
	...
	};
};

'parent_bus_addr' in struct of_pci_range can indicate above diagram internal
address (IA) address information.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v5 to v6
-none

Change from v4 to v5
- remove confused  <0x5f000000 0x0 0x5f000000 0x21000000>
- change address order to 7ff8_0000, 7ff0_0000, 7000_0000
- In commit message use parent bus addres

Change from v3 to v4
- improve commit message by driver source code path.

Change from v2 to v3
- cpu_untranslate_addr -> parent_bus_addr
- Add Rob's review tag
  I changed commit message base on Bjorn, if you have concern about review
added tag, let me know.

Change from v1 to v2
- add parent_bus_addr in struct of_pci_range, instead adding new API.
---
 drivers/of/address.c       | 2 ++
 include/linux/of_address.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/of/address.c b/drivers/of/address.c
index 286f0c161e332..1a0229ee4e0b2 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -811,6 +811,8 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
 	else
 		range->cpu_addr = of_translate_address(parser->node,
 				parser->range + na);
+
+	range->parent_bus_addr = of_read_number(parser->range + na, parser->pna);
 	range->size = of_read_number(parser->range + parser->pna + na, ns);
 
 	parser->range += np;
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index 26a19daf0d092..13dd79186d02c 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -26,6 +26,7 @@ struct of_pci_range {
 		u64 bus_addr;
 	};
 	u64 cpu_addr;
+	u64 parent_bus_addr;
 	u64 size;
 	u32 flags;
 };

-- 
2.34.1

[PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()

[Frank Li]

parent_bus_addr in struct of_range can indicate address information just
ahead of PCIe controller. Most system's bus fabric use 1:1 map between
input and output address. but some hardware like i.MX8QXP doesn't use 1:1
map. See below diagram:

            ┌─────────┐                    ┌────────────┐
 ┌─────┐    │         │ IA: 0x8ff8_0000    │            │
 │ CPU ├───►│   ┌────►├─────────────────┐  │ PCI        │
 └─────┘    │   │     │ IA: 0x8ff0_0000 │  │            │
  CPU Addr  │   │  ┌─►├─────────────┐   │  │ Controller │
0x7ff8_0000─┼───┘  │  │             │   │  │            │
            │      │  │             │   │  │            │   PCI Addr
0x7ff0_0000─┼──────┘  │             │   └──► IOSpace   ─┼────────────►
            │         │             │      │            │    0
0x7000_0000─┼────────►├─────────┐   │      │            │
            └─────────┘         │   └──────► CfgSpace  ─┼────────────►
             BUS Fabric         │          │            │    0
                                │          │            │
                                └──────────► MemSpace  ─┼────────────►
                        IA: 0x8000_0000    │            │  0x8000_0000
                                           └────────────┘

bus@5f000000 {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x80000000 0x0 0x70000000 0x10000000>;

	pcie@5f010000 {
		compatible = "fsl,imx8q-pcie";
		reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
		reg-names = "dbi", "config";
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		bus-range = <0x00 0xff>;
		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
	...
	};
};

Term internal address (IA) here means the address just before PCIe
controller. After ATU use this IA instead CPU address, cpu_addr_fixup() can
be removed.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Chagne from v5 to v6
-add comments for of_property_read_reg().

Change from v4 to v5
- remove confused 0x5f00_0000 range in sample dts.
- reorder address at above diagram.

Change from v3 to v4
- none

Change from v2 to v3
- %s/cpu_untranslate_addr/parent_bus_addr/g
- update diagram.
- improve commit message.

Change from v1 to v2
- update because patch1 change get untranslate address method.
- add using_dtbus_info in case break back compatibility for exited platform.
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 49 +++++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-designware.h      |  8 ++++
 2 files changed, 57 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 3e41865c72904..a4f2578700eb3 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -418,6 +418,34 @@ static void dw_pcie_host_request_msg_tlp_res(struct dw_pcie_rp *pp)
 	}
 }
 
+static int dw_pcie_get_untranslate_addr(struct dw_pcie *pci, resource_size_t pci_addr,
+					resource_size_t *i_addr)
+{
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+	struct of_range_parser parser;
+	struct of_range range;
+	int ret;
+
+	if (!pci->using_dtbus_info) {
+		*i_addr = pci_addr;
+		return 0;
+	}
+
+	ret = of_range_parser_init(&parser, np);
+	if (ret)
+		return ret;
+
+	for_each_of_pci_range(&parser, &range) {
+		if (pci_addr == range.bus_addr) {
+			*i_addr = range.parent_bus_addr;
+			break;
+		}
+	}
+
+	return 0;
+}
+
 int dw_pcie_host_init(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -427,6 +455,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 	struct resource_entry *win;
 	struct pci_host_bridge *bridge;
 	struct resource *res;
+	int index;
 	int ret;
 
 	raw_spin_lock_init(&pp->lock);
@@ -440,6 +469,20 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 		pp->cfg0_size = resource_size(res);
 		pp->cfg0_base = res->start;
 
+		if (pci->using_dtbus_info) {
+			index = of_property_match_string(np, "reg-names", "config");
+			if (index < 0)
+				return -EINVAL;
+			/*
+			 * Retrieve the parent bus address of PCI config space.
+			 * If the parent bus ranges in the device tree provide
+			 * the correct address conversion information, set
+			 * 'using_dtbus_info' to true, The 'cpu_addr_fixup()'
+			 * can be eliminated.
+			 */
+			of_property_read_reg(np, index, &pp->cfg0_base, NULL);
+		}
+
 		pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res);
 		if (IS_ERR(pp->va_cfg0_base))
 			return PTR_ERR(pp->va_cfg0_base);
@@ -462,6 +505,9 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 		pp->io_base = pci_pio_to_address(win->res->start);
 	}
 
+	if (dw_pcie_get_untranslate_addr(pci, pp->io_bus_addr, &pp->io_base))
+		return -ENODEV;
+
 	/* Set default bus ops */
 	bridge->ops = &dw_pcie_ops;
 	bridge->child_ops = &dw_child_pcie_ops;
@@ -733,6 +779,9 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
 		atu.cpu_addr = entry->res->start;
 		atu.pci_addr = entry->res->start - entry->offset;
 
+		if (dw_pcie_get_untranslate_addr(pci, atu.pci_addr, &atu.cpu_addr))
+			return -EINVAL;
+
 		/* Adjust iATU size if MSG TLP region was allocated before */
 		if (pp->msg_res && pp->msg_res->parent == entry->res)
 			atu.size = resource_size(entry->res) -
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 347ab74ac35aa..f8067393ad35a 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -463,6 +463,14 @@ struct dw_pcie {
 	struct reset_control_bulk_data	core_rsts[DW_PCIE_NUM_CORE_RSTS];
 	struct gpio_desc		*pe_rst;
 	bool			suspended;
+	/*
+	 * Use device tree 'ranges' property of bus node instead using
+	 * cpu_addr_fixup(). Some old platform dts 'ranges' in bus node may not
+	 * reflect real hardware's behavior. In case break these platform back
+	 * compatibility, add below flags. Set it true if dts already correct
+	 * indicate bus fabric address convert.
+	 */
+	bool			using_dtbus_info;
 };
 
 #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)

-- 
2.34.1

[PATCH v6 3/7] PCI: dwc: ep: Add bus_addr_base for outbound window

[Frank Li]

                   Endpoint
  ┌───────────────────────────────────────────────┐
  │                             pcie-ep@5f010000  │
  │                             ┌────────────────┐│
  │                             │   Endpoint     ││
  │                             │   PCIe         ││
  │                             │   Controller   ││
  │           bus@5f000000      │                ││
  │           ┌──────────┐      │                ││
  │           │          │ Outbound Transfer     ││
  │┌─────┐    │  Bus     ┼─────►│ ATU  ──────────┬┬─────►
  ││     │    │  Fabric  │Bus   │                ││PCI Addr
  ││ CPU ├───►│          │Addr  │                ││0xA000_0000
  ││     │CPU │          │0x8000_0000            ││
  │└─────┘Addr└──────────┘      │                ││
  │       0x7000_0000           └────────────────┘│
  └───────────────────────────────────────────────┘

Add 'bus_addr_base' to configure the outbound window address for CPU write.
The bus fabric generally passes the same address to the PCIe EP controller,
but some bus fabrics convert the address before sending it to the PCIe EP
controller.

Above diagram, CPU write data to outbound windows address 0x7000_0000,
Bus fabric convert it to 0x8000_0000. ATU should use bus address
0x8000_0000 as input address and convert to PCI address 0xA000_0000.

Previously, 'cpu_addr_fixup()' was used to handle address conversion. Now,
the device tree provides this information, preferring a common method.

bus@5f000000 {
	compatible = "simple-bus";
	ranges = <0x80000000 0x0 0x70000000 0x10000000>;

	pcie-ep@5f010000 {
		reg = <0x80000000 0x10000000>;
		reg-names ="addr_space";
		...
	};
	...
};

'ranges' in bus@5f000000 descript how address convert from CPU address
to bus address.

Use `of_property_read_reg()` to obtain the bus address and set it to the
ATU correctly, eliminating the need for vendor-specific cpu_addr_fixup().

Add 'using_dtbus_info' to indicate device tree reflect correctly bus
address translation in case break compatibility.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v5 to v6
- update diagram
- Add comments for of_property_read_reg()
- Remove unrelated 0x5f00_0000 in commit message

Change from v3 to v4
- change bus_addr_base to u64 to fix 32bit build error
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202410230328.BTHareG1-lkp@intel.com/

Change from v2 to v3
- Add using_dtbus_info to control if use device tree bus ranges
information.
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 21 ++++++++++++++++++++-
 drivers/pci/controller/dwc/pcie-designware.h    |  1 +
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 43ba5c6738df1..a5b40c32aadf5 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -9,6 +9,7 @@
 #include <linux/align.h>
 #include <linux/bitfield.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/platform_device.h>
 
 #include "pcie-designware.h"
@@ -294,7 +295,7 @@ static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 
 	atu.func_no = func_no;
 	atu.type = PCIE_ATU_TYPE_MEM;
-	atu.cpu_addr = addr;
+	atu.cpu_addr = addr - ep->phys_base + ep->bus_addr_base;
 	atu.pci_addr = pci_addr;
 	atu.size = size;
 	ret = dw_pcie_ep_outbound_atu(ep, &atu);
@@ -861,6 +862,7 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 	struct device *dev = pci->dev;
 	struct platform_device *pdev = to_platform_device(dev);
 	struct device_node *np = dev->of_node;
+	int index;
 
 	INIT_LIST_HEAD(&ep->func_list);
 
@@ -873,6 +875,23 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		return -EINVAL;
 
 	ep->phys_base = res->start;
+	ep->bus_addr_base = ep->phys_base;
+
+	if (pci->using_dtbus_info) {
+		index = of_property_match_string(np, "reg-names", "addr_space");
+		if (index < 0)
+			return -EINVAL;
+
+		/*
+		 * Retrieve the local bus address information, which is sent to
+		 * the PCIe Endpoint (EP) controller. If the parent bus
+		 * 'ranges' in the device tree provide the correct address
+		 * conversion information, set 'using_dtbus_info' to true. This
+		 * allows 'cpu_addr_fixup()' to be eliminated.
+		 */
+		of_property_read_reg(np, index, &ep->bus_addr_base, NULL);
+	}
+
 	ep->addr_size = resource_size(res);
 
 	if (ep->ops->pre_init)
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index f8067393ad35a..f10b533b04f77 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -410,6 +410,7 @@ struct dw_pcie_ep {
 	struct list_head	func_list;
 	const struct dw_pcie_ep_ops *ops;
 	phys_addr_t		phys_base;
+	u64			bus_addr_base;
 	size_t			addr_size;
 	size_t			page_size;
 	u8			bar_to_atu[PCI_STD_NUM_BARS];

-- 
2.34.1

[PATCH v6 4/7] PCI: imx6: Remove cpu_addr_fixup()

[Frank Li]

Remove cpu_addr_fixup() because dwc common driver already handle address
translate.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v2 to v6
- none
Change from v1 to v2
- set using_dtbus_info true
---
 drivers/pci/controller/dwc/pci-imx6.c | 22 ++--------------------
 1 file changed, 2 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 808d1f1054173..533905b3942a1 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -81,7 +81,6 @@ enum imx_pcie_variants {
 #define IMX_PCIE_FLAG_HAS_PHY_RESET		BIT(5)
 #define IMX_PCIE_FLAG_HAS_SERDES		BIT(6)
 #define IMX_PCIE_FLAG_SUPPORT_64BIT		BIT(7)
-#define IMX_PCIE_FLAG_CPU_ADDR_FIXUP		BIT(8)
 
 #define imx_check_flag(pci, val)	(pci->drvdata->flags & val)
 
@@ -1012,22 +1011,6 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
 		regulator_disable(imx_pcie->vpcie);
 }
 
-static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
-{
-	struct imx_pcie *imx_pcie = to_imx_pcie(pcie);
-	struct dw_pcie_rp *pp = &pcie->pp;
-	struct resource_entry *entry;
-
-	if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_CPU_ADDR_FIXUP))
-		return cpu_addr;
-
-	entry = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
-	if (!entry)
-		return cpu_addr;
-
-	return cpu_addr - entry->offset;
-}
-
 static const struct dw_pcie_host_ops imx_pcie_host_ops = {
 	.init = imx_pcie_host_init,
 	.deinit = imx_pcie_host_exit,
@@ -1036,7 +1019,6 @@ static const struct dw_pcie_host_ops imx_pcie_host_ops = {
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.start_link = imx_pcie_start_link,
 	.stop_link = imx_pcie_stop_link,
-	.cpu_addr_fixup = imx_pcie_cpu_addr_fixup,
 };
 
 static void imx_pcie_ep_init(struct dw_pcie_ep *ep)
@@ -1446,6 +1428,7 @@ static int imx_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	pci->using_dtbus_info = true;
 	if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
 		ret = imx_add_pcie_ep(imx_pcie, pdev);
 		if (ret < 0)
@@ -1585,8 +1568,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
 	},
 	[IMX8Q] = {
 		.variant = IMX8Q,
-		.flags = IMX_PCIE_FLAG_HAS_PHYDRV |
-			 IMX_PCIE_FLAG_CPU_ADDR_FIXUP,
+		.flags = IMX_PCIE_FLAG_HAS_PHYDRV,
 		.clk_names = imx8q_clks,
 		.clks_cnt = ARRAY_SIZE(imx8q_clks),
 	},

-- 
2.34.1

[PATCH v6 5/7] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep

[Frank Li]

Add new compatible string fsl,imx8q-pcie-ep for iMX8Q. reg-names only needs
'dbi' and 'addr_space' because the others are located at default offset.
The clock-names align Root Complex (RC)'s naming.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v3 to v6
- none
Change from v2 to v3
- Add conor review tag
---
 .../devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml | 38 +++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
index 84ca12e8b25be..7bd00faa1f2c3 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -22,6 +22,7 @@ properties:
       - fsl,imx8mm-pcie-ep
       - fsl,imx8mq-pcie-ep
       - fsl,imx8mp-pcie-ep
+      - fsl,imx8q-pcie-ep
       - fsl,imx95-pcie-ep
 
   clocks:
@@ -74,6 +75,20 @@ allOf:
             - const: dbi2
             - const: atu
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8q-pcie-ep
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          items:
+            - const: dbi
+            - const: addr_space
+
   - if:
       properties:
         compatible:
@@ -109,7 +124,14 @@ allOf:
             - const: pcie_bus
             - const: pcie_phy
             - const: pcie_aux
-    else:
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mm-pcie-ep
+            - fsl,imx8mp-pcie-ep
+    then:
       properties:
         clocks:
           maxItems: 3
@@ -119,6 +141,20 @@ allOf:
             - const: pcie_bus
             - const: pcie_aux
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imxq-pcie-ep
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: dbi
+            - const: mstr
+            - const: slv
 
 unevaluatedProperties: false
 

-- 
2.34.1

[PATCH v6 6/7] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()

[Frank Li]

Fix hardcoding to Root Complex (RC) mode by adding a drvdata mode check.
Pass PHY_MODE_PCIE_EP if the PCI controller operates in Endpoint (EP) mode.

Fixes: 8026f2d8e8a9 ("PCI: imx6: Call common PHY API to set mode, speed, and submode")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v3->v6
- none
Change from v2->v3
- Add mani's review tag
---
 drivers/pci/controller/dwc/pci-imx6.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 533905b3942a1..8102a02a00b38 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -960,7 +960,9 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 			goto err_clk_disable;
 		}
 
-		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE,
+				       imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE ?
+						PHY_MODE_PCIE_EP : PHY_MODE_PCIE_RC);
 		if (ret) {
 			dev_err(dev, "unable to set PCIe PHY mode\n");
 			goto err_phy_exit;

-- 
2.34.1

[PATCH v6 7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support

[Frank Li]

Add support for i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe
Endpoint (EP). On i.MX8Q platforms, the PCI bus addresses differ from the
CPU addresses. The DesignWare (DWC) driver already handles this in the
common code.

Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Chagne from v3 to v6
- none
change from v2 to v3
- add Mani's review tag
- Add pci->using_dtbus_info = true;
---
 drivers/pci/controller/dwc/pci-imx6.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 8102a02a00b38..94f3411352bf0 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -70,6 +70,7 @@ enum imx_pcie_variants {
 	IMX8MQ_EP,
 	IMX8MM_EP,
 	IMX8MP_EP,
+	IMX8Q_EP,
 	IMX95_EP,
 };
 
@@ -1061,6 +1062,16 @@ static const struct pci_epc_features imx8m_pcie_epc_features = {
 	.align = SZ_64K,
 };
 
+static const struct pci_epc_features imx8q_pcie_epc_features = {
+	.linkup_notifier = false,
+	.msi_capable = true,
+	.msix_capable = false,
+	.bar[BAR_1] = { .type = BAR_RESERVED, },
+	.bar[BAR_3] = { .type = BAR_RESERVED, },
+	.bar[BAR_5] = { .type = BAR_RESERVED, },
+	.align = SZ_64K,
+};
+
 /*
  * BAR#	| Default BAR enable	| Default BAR Type	| Default BAR Size	| BAR Sizing Scheme
  * ================================================================================================
@@ -1627,6 +1638,14 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.epc_features = &imx8m_pcie_epc_features,
 		.enable_ref_clk = imx8mm_pcie_enable_ref_clk,
 	},
+	[IMX8Q_EP] = {
+		.variant = IMX8Q_EP,
+		.flags = IMX_PCIE_FLAG_HAS_PHYDRV,
+		.mode = DW_PCIE_EP_TYPE,
+		.epc_features = &imx8q_pcie_epc_features,
+		.clk_names = imx8q_clks,
+		.clks_cnt = ARRAY_SIZE(imx8q_clks),
+	},
 	[IMX95_EP] = {
 		.variant = IMX95_EP,
 		.flags = IMX_PCIE_FLAG_HAS_SERDES |
@@ -1656,6 +1675,7 @@ static const struct of_device_id imx_pcie_of_match[] = {
 	{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
 	{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
 	{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
+	{ .compatible = "fsl,imx8q-pcie-ep", .data = &drvdata[IMX8Q_EP], },
 	{ .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], },
 	{},
 };

-- 
2.34.1

Re: [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()

[kernel test robot]

Hi Frank,

kernel test robot noticed the following build errors:

[auto build test ERROR on 9852d85ec9d492ebef56dc5f229416c925758edc]

url:    https://github.com/intel-lab-lkp/linux/commits/Frank-Li/of-address-Add-parent_bus_addr-to-struct-of_pci_range/20241029-030935
base:   9852d85ec9d492ebef56dc5f229416c925758edc
patch link:    https://lore.kernel.org/r/20241028-pci_fixup_addr-v6-2-ebebcd8fd4ff%40nxp.com
patch subject: [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
config: openrisc-allyesconfig (https://download.01.org/0day-ci/archive/20241029/202410291248.Qc61mosK-lkp@intel.com/config)
compiler: or1k-linux-gcc (GCC) 14.1.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241029/202410291248.Qc61mosK-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202410291248.Qc61mosK-lkp@intel.com/

All errors (new ones prefixed by >>):

   drivers/pci/controller/dwc/pcie-designware-host.c: In function 'dw_pcie_iatu_setup':
>> drivers/pci/controller/dwc/pcie-designware-host.c:782:69: error: passing argument 3 of 'dw_pcie_get_untranslate_addr' from incompatible pointer type [-Wincompatible-pointer-types]
     782 |                 if (dw_pcie_get_untranslate_addr(pci, atu.pci_addr, &atu.cpu_addr))
         |                                                                     ^~~~~~~~~~~~~
         |                                                                     |
         |                                                                     u64 * {aka long long unsigned int *}
   drivers/pci/controller/dwc/pcie-designware-host.c:422:58: note: expected 'resource_size_t *' {aka 'unsigned int *'} but argument is of type 'u64 *' {aka 'long long unsigned int *'}
     422 |                                         resource_size_t *i_addr)
         |                                         ~~~~~~~~~~~~~~~~~^~~~~~

Kconfig warnings: (for reference only)
   WARNING: unmet direct dependencies detected for GET_FREE_REGION
   Depends on [n]: SPARSEMEM [=n]
   Selected by [y]:
   - RESOURCE_KUNIT_TEST [=y] && RUNTIME_TESTING_MENU [=y] && KUNIT [=y]


vim +/dw_pcie_get_untranslate_addr +782 drivers/pci/controller/dwc/pcie-designware-host.c

   745	
   746	static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
   747	{
   748		struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
   749		struct dw_pcie_ob_atu_cfg atu = { 0 };
   750		struct resource_entry *entry;
   751		int i, ret;
   752	
   753		/* Note the very first outbound ATU is used for CFG IOs */
   754		if (!pci->num_ob_windows) {
   755			dev_err(pci->dev, "No outbound iATU found\n");
   756			return -EINVAL;
   757		}
   758	
   759		/*
   760		 * Ensure all out/inbound windows are disabled before proceeding with
   761		 * the MEM/IO (dma-)ranges setups.
   762		 */
   763		for (i = 0; i < pci->num_ob_windows; i++)
   764			dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
   765	
   766		for (i = 0; i < pci->num_ib_windows; i++)
   767			dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_IB, i);
   768	
   769		i = 0;
   770		resource_list_for_each_entry(entry, &pp->bridge->windows) {
   771			if (resource_type(entry->res) != IORESOURCE_MEM)
   772				continue;
   773	
   774			if (pci->num_ob_windows <= ++i)
   775				break;
   776	
   777			atu.index = i;
   778			atu.type = PCIE_ATU_TYPE_MEM;
   779			atu.cpu_addr = entry->res->start;
   780			atu.pci_addr = entry->res->start - entry->offset;
   781	
 > 782			if (dw_pcie_get_untranslate_addr(pci, atu.pci_addr, &atu.cpu_addr))
   783				return -EINVAL;
   784	
   785			/* Adjust iATU size if MSG TLP region was allocated before */
   786			if (pp->msg_res && pp->msg_res->parent == entry->res)
   787				atu.size = resource_size(entry->res) -
   788						resource_size(pp->msg_res);
   789			else
   790				atu.size = resource_size(entry->res);
   791	
   792			ret = dw_pcie_prog_outbound_atu(pci, &atu);
   793			if (ret) {
   794				dev_err(pci->dev, "Failed to set MEM range %pr\n",
   795					entry->res);
   796				return ret;
   797			}
   798		}
   799	
   800		if (pp->io_size) {
   801			if (pci->num_ob_windows > ++i) {
   802				atu.index = i;
   803				atu.type = PCIE_ATU_TYPE_IO;
   804				atu.cpu_addr = pp->io_base;
   805				atu.pci_addr = pp->io_bus_addr;
   806				atu.size = pp->io_size;
   807	
   808				ret = dw_pcie_prog_outbound_atu(pci, &atu);
   809				if (ret) {
   810					dev_err(pci->dev, "Failed to set IO range %pr\n",
   811						entry->res);
   812					return ret;
   813				}
   814			} else {
   815				pp->cfg0_io_shared = true;
   816			}
   817		}
   818	
   819		if (pci->num_ob_windows <= i)
   820			dev_warn(pci->dev, "Ranges exceed outbound iATU size (%d)\n",
   821				 pci->num_ob_windows);
   822	
   823		pp->msg_atu_index = i;
   824	
   825		i = 0;
   826		resource_list_for_each_entry(entry, &pp->bridge->dma_ranges) {
   827			if (resource_type(entry->res) != IORESOURCE_MEM)
   828				continue;
   829	
   830			if (pci->num_ib_windows <= i)
   831				break;
   832	
   833			ret = dw_pcie_prog_inbound_atu(pci, i++, PCIE_ATU_TYPE_MEM,
   834						       entry->res->start,
   835						       entry->res->start - entry->offset,
   836						       resource_size(entry->res));
   837			if (ret) {
   838				dev_err(pci->dev, "Failed to set DMA range %pr\n",
   839					entry->res);
   840				return ret;
   841			}
   842		}
   843	
   844		if (pci->num_ib_windows <= i)
   845			dev_warn(pci->dev, "Dma-ranges exceed inbound iATU size (%u)\n",
   846				 pci->num_ib_windows);
   847	
   848		return 0;
   849	}
   850	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()

[kernel test robot]

Hi Frank,

kernel test robot noticed the following build errors:

[auto build test ERROR on 9852d85ec9d492ebef56dc5f229416c925758edc]

url:    https://github.com/intel-lab-lkp/linux/commits/Frank-Li/of-address-Add-parent_bus_addr-to-struct-of_pci_range/20241029-030935
base:   9852d85ec9d492ebef56dc5f229416c925758edc
patch link:    https://lore.kernel.org/r/20241028-pci_fixup_addr-v6-2-ebebcd8fd4ff%40nxp.com
patch subject: [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
config: arm-defconfig (https://download.01.org/0day-ci/archive/20241029/202410291546.kvgEWJv7-lkp@intel.com/config)
compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project f28c006a5895fc0e329fe15fead81e37457cb1d1)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241029/202410291546.kvgEWJv7-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202410291546.kvgEWJv7-lkp@intel.com/

All errors (new ones prefixed by >>):

>> drivers/pci/controller/dwc/pcie-designware-host.c:782:55: error: incompatible pointer types passing 'u64 *' (aka 'unsigned long long *') to parameter of type 'resource_size_t *' (aka 'unsigned int *') [-Werror,-Wincompatible-pointer-types]
                   if (dw_pcie_get_untranslate_addr(pci, atu.pci_addr, &atu.cpu_addr))
                                                                       ^~~~~~~~~~~~~
   drivers/pci/controller/dwc/pcie-designware-host.c:422:23: note: passing argument to parameter 'i_addr' here
                                           resource_size_t *i_addr)
                                                            ^
   1 error generated.


vim +782 drivers/pci/controller/dwc/pcie-designware-host.c

   745	
   746	static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
   747	{
   748		struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
   749		struct dw_pcie_ob_atu_cfg atu = { 0 };
   750		struct resource_entry *entry;
   751		int i, ret;
   752	
   753		/* Note the very first outbound ATU is used for CFG IOs */
   754		if (!pci->num_ob_windows) {
   755			dev_err(pci->dev, "No outbound iATU found\n");
   756			return -EINVAL;
   757		}
   758	
   759		/*
   760		 * Ensure all out/inbound windows are disabled before proceeding with
   761		 * the MEM/IO (dma-)ranges setups.
   762		 */
   763		for (i = 0; i < pci->num_ob_windows; i++)
   764			dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
   765	
   766		for (i = 0; i < pci->num_ib_windows; i++)
   767			dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_IB, i);
   768	
   769		i = 0;
   770		resource_list_for_each_entry(entry, &pp->bridge->windows) {
   771			if (resource_type(entry->res) != IORESOURCE_MEM)
   772				continue;
   773	
   774			if (pci->num_ob_windows <= ++i)
   775				break;
   776	
   777			atu.index = i;
   778			atu.type = PCIE_ATU_TYPE_MEM;
   779			atu.cpu_addr = entry->res->start;
   780			atu.pci_addr = entry->res->start - entry->offset;
   781	
 > 782			if (dw_pcie_get_untranslate_addr(pci, atu.pci_addr, &atu.cpu_addr))
   783				return -EINVAL;
   784	
   785			/* Adjust iATU size if MSG TLP region was allocated before */
   786			if (pp->msg_res && pp->msg_res->parent == entry->res)
   787				atu.size = resource_size(entry->res) -
   788						resource_size(pp->msg_res);
   789			else
   790				atu.size = resource_size(entry->res);
   791	
   792			ret = dw_pcie_prog_outbound_atu(pci, &atu);
   793			if (ret) {
   794				dev_err(pci->dev, "Failed to set MEM range %pr\n",
   795					entry->res);
   796				return ret;
   797			}
   798		}
   799	
   800		if (pp->io_size) {
   801			if (pci->num_ob_windows > ++i) {
   802				atu.index = i;
   803				atu.type = PCIE_ATU_TYPE_IO;
   804				atu.cpu_addr = pp->io_base;
   805				atu.pci_addr = pp->io_bus_addr;
   806				atu.size = pp->io_size;
   807	
   808				ret = dw_pcie_prog_outbound_atu(pci, &atu);
   809				if (ret) {
   810					dev_err(pci->dev, "Failed to set IO range %pr\n",
   811						entry->res);
   812					return ret;
   813				}
   814			} else {
   815				pp->cfg0_io_shared = true;
   816			}
   817		}
   818	
   819		if (pci->num_ob_windows <= i)
   820			dev_warn(pci->dev, "Ranges exceed outbound iATU size (%d)\n",
   821				 pci->num_ob_windows);
   822	
   823		pp->msg_atu_index = i;
   824	
   825		i = 0;
   826		resource_list_for_each_entry(entry, &pp->bridge->dma_ranges) {
   827			if (resource_type(entry->res) != IORESOURCE_MEM)
   828				continue;
   829	
   830			if (pci->num_ib_windows <= i)
   831				break;
   832	
   833			ret = dw_pcie_prog_inbound_atu(pci, i++, PCIE_ATU_TYPE_MEM,
   834						       entry->res->start,
   835						       entry->res->start - entry->offset,
   836						       resource_size(entry->res));
   837			if (ret) {
   838				dev_err(pci->dev, "Failed to set DMA range %pr\n",
   839					entry->res);
   840				return ret;
   841			}
   842		}
   843	
   844		if (pci->num_ib_windows <= i)
   845			dev_warn(pci->dev, "Dma-ranges exceed inbound iATU size (%u)\n",
   846				 pci->num_ib_windows);
   847	
   848		return 0;
   849	}
   850	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki