Re: [PATCH PCI v2] PCI: Add ACS quirk for Wangxun FF5XXX NICS

[Bjorn Helgaas <helgaas@kernel.org>]

On Fri, Nov 15, 2024 at 10:46:04AM +0800, Mengyuan Lou wrote:
> Wangxun FF5xxx NICs are similar to SFxxx, RP1000 and RP2000 NICs.
> They may be multi-function devices, but they do not advertise an ACS
> capability.
> 
> But the hardware does isolate FF5xxx functions as though it had an
> ACS capability and PCI_ACS_RR and PCI_ACS_CR were set in the ACS
> Control register, i.e., all peer-to-peer traffic is directed
> upstream instead of being routed internally.
> 
> Add ACS quirk for FF5xxx NICs in pci_quirk_wangxun_nic_acs() so the
> functions can be in independent IOMMU groups.
> 
> Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>

Applied to pci/virtualization for v6.13, thank you!

> ---
> 
> v2:
> - Update commit and comment logs.
> v1:
> https://lore.kernel.org/linux-pci/3D914272-CFAE-4B37-A07B-36CA77210110@net-swift.com/T/#t
> 
>  drivers/pci/quirks.c | 15 +++++++++------
>  1 file changed, 9 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index dccb60c1d9cc..8103bc24a54e 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -4996,18 +4996,21 @@ static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags)
>  }
>  
>  /*
> - * Wangxun 10G/1G NICs have no ACS capability, and on multi-function
> - * devices, peer-to-peer transactions are not be used between the functions.
> - * So add an ACS quirk for below devices to isolate functions.
> + * Wangxun 40G/25G/10G/1G NICs have no ACS capability, but on
> + * multi-function devices, the hardware isolates the functions by
> + * directing all peer-to-peer traffic upstream as though PCI_ACS_RR and
> + * PCI_ACS_CR were set.
>   * SFxxx 1G NICs(em).
>   * RP1000/RP2000 10G NICs(sp).
> + * FF5xxx 40G/25G/10G NICs(aml).
>   */
>  static int  pci_quirk_wangxun_nic_acs(struct pci_dev *dev, u16 acs_flags)
>  {
>  	switch (dev->device) {
> -	case 0x0100 ... 0x010F:
> -	case 0x1001:
> -	case 0x2001:
> +	case 0x0100 ... 0x010F: /* EM */
> +	case 0x1001: case 0x2001: /* SP */
> +	case 0x5010: case 0x5025: case 0x5040: /* AML */
> +	case 0x5110: case 0x5125: case 0x5140: /* AML */
>  		return pci_acs_ctrl_enabled(acs_flags,
>  			PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
>  	}
> -- 
> 2.43.2
>