[PATCH v5 0/6] PCI endpoint additional pci_epc_set_bar() checks

[Niklas Cassel <cassel@kernel.org>]

Hello all,

This series adds some extra checks to ensure that it is not possible to
program the iATU with an address which we did not intend to use.

If these checks were in place when testing some of the earlier revisions
of Frank's doorbell patches (which did not handle fixed BARs properly),
we would gotten an error, rather than silently using an address which we
did not intend to use.

Having these checks in place will hopefully avoid similar debugging in the
future.


Kind regards,
Niklas


Changes since v4:
-Split patch 1/5 into two patches (patch 1/6 and 2/6), as suggested by Mani.
-Added Cc: stable for patch 1/6, as suggested by Mani.
-Picked up tags from Mani.


Niklas Cassel (6):
  PCI: dwc: ep: iATU registers must be written after the BAR_MASK
  PCI: dwc: ep: Add missing checks when dynamically changing a BAR
  PCI: dwc: ep: Add 'address' alignment to 'size' check in
    dw_pcie_prog_ep_inbound_atu()
  PCI: artpec6: Implement dw_pcie_ep operation get_features
  PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
  PCI: endpoint: Verify that requested BAR size is a power of two

 drivers/pci/controller/dwc/pcie-artpec6.c     | 13 +++++
 .../pci/controller/dwc/pcie-designware-ep.c   | 52 ++++++++++++++-----
 drivers/pci/controller/dwc/pcie-designware.c  |  5 +-
 drivers/pci/controller/dwc/pcie-designware.h  |  2 +-
 drivers/pci/endpoint/pci-epc-core.c           | 14 ++++-
 5 files changed, 67 insertions(+), 19 deletions(-)

-- 
2.47.0