[PATCH v2 1/4] arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

From: Krishna chaitanya chundru <quic_krichai@quicinc.com>

Increase the configuration size to 256MB as required by the ECAM feature.
And also move config space, DBI, ELBI, iATU to upper PCIe region and use
lower PCIe region entierly for BAR region.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 55db1c83ef55..bece859aee31 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2201,10 +2201,10 @@ wifi: wifi@17a10040 {
 		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sc7280";
 			reg = <0 0x01c08000 0 0x3000>,
-			      <0 0x40000000 0 0xf1d>,
-			      <0 0x40000f20 0 0xa8>,
-			      <0 0x40001000 0 0x1000>,
-			      <0 0x40100000 0 0x100000>;
+			      <4 0x00000000 0 0xf1d>,
+			      <4 0x00000f20 0 0xa8>,
+			      <4 0x10000000 0 0x1000>,
+			      <4 0x00000000 0 0x10000000>;
 
 			reg-names = "parf", "dbi", "elbi", "atu", "config";
 			device_type = "pci";
@@ -2215,8 +2215,8 @@ pcie1: pcie@1c08000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40000000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40100000 0x0 0x40100000 0x0 0x1ff00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,

-- 
2.34.1