Linux PCI subsystem development
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 1/1] PCI: Cleanup dev->resource + resno to use pci_resource_n()
Date: Fri,  7 Feb 2025 18:23:01 +0200	[thread overview]
Message-ID: <20250207162301.2842-1-ilpo.jarvinen@linux.intel.com> (raw)

Replace pointer arithmentic in finding the correct resource entry with
the pci_resource_n() helper.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/pci/iov.c       |  2 +-
 drivers/pci/pci.c       |  2 +-
 drivers/pci/quirks.c    |  4 ++--
 drivers/pci/setup-res.c | 12 ++++++------
 4 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 9e4770cdd4d5..121540f57d4b 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -952,7 +952,7 @@ void pci_iov_remove(struct pci_dev *dev)
 void pci_iov_update_resource(struct pci_dev *dev, int resno)
 {
 	struct pci_sriov *iov = dev->is_physfn ? dev->sriov : NULL;
-	struct resource *res = dev->resource + resno;
+	struct resource *res = pci_resource_n(dev, resno);
 	int vf_bar = resno - PCI_IOV_RESOURCES;
 	struct pci_bus_region region;
 	u16 cmd;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 869d204a70a3..c4f710f782f6 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1884,7 +1884,7 @@ static void pci_restore_rebar_state(struct pci_dev *pdev)
 
 		pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
 		bar_idx = ctrl & PCI_REBAR_CTRL_BAR_IDX;
-		res = pdev->resource + bar_idx;
+		res = pci_resource_n(pdev, bar_idx);
 		size = pci_rebar_bytes_to_size(resource_size(res));
 		ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE;
 		ctrl |= FIELD_PREP(PCI_REBAR_CTRL_BAR_SIZE, size);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b84ff7bade82..5cc4610201b7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -621,7 +621,7 @@ static void quirk_io(struct pci_dev *dev, int pos, unsigned int size,
 {
 	u32 region;
 	struct pci_bus_region bus_region;
-	struct resource *res = dev->resource + pos;
+	struct resource *res = pci_resource_n(dev, pos);
 	const char *res_name = pci_resource_name(dev, pos);
 
 	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), &region);
@@ -671,7 +671,7 @@ static void quirk_io_region(struct pci_dev *dev, int port,
 {
 	u16 region;
 	struct pci_bus_region bus_region;
-	struct resource *res = dev->resource + nr;
+	struct resource *res = pci_resource_n(dev, nr);
 
 	pci_read_config_word(dev, port, &region);
 	region &= ~(size - 1);
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index ca14576bf2bf..ad6436007148 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -29,7 +29,7 @@ static void pci_std_update_resource(struct pci_dev *dev, int resno)
 	u16 cmd;
 	u32 new, check, mask;
 	int reg;
-	struct resource *res = dev->resource + resno;
+	struct resource *res = pci_resource_n(dev, resno);
 	const char *res_name = pci_resource_name(dev, resno);
 
 	/* Per SR-IOV spec 3.4.1.11, VF BARs are RO zero */
@@ -262,7 +262,7 @@ resource_size_t __weak pcibios_align_resource(void *data,
 static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
 		int resno, resource_size_t size, resource_size_t align)
 {
-	struct resource *res = dev->resource + resno;
+	struct resource *res = pci_resource_n(dev, resno);
 	resource_size_t min;
 	int ret;
 
@@ -325,7 +325,7 @@ static int _pci_assign_resource(struct pci_dev *dev, int resno,
 
 int pci_assign_resource(struct pci_dev *dev, int resno)
 {
-	struct resource *res = dev->resource + resno;
+	struct resource *res = pci_resource_n(dev, resno);
 	const char *res_name = pci_resource_name(dev, resno);
 	resource_size_t align, size;
 	int ret;
@@ -372,7 +372,7 @@ EXPORT_SYMBOL(pci_assign_resource);
 int pci_reassign_resource(struct pci_dev *dev, int resno,
 			  resource_size_t addsize, resource_size_t min_align)
 {
-	struct resource *res = dev->resource + resno;
+	struct resource *res = pci_resource_n(dev, resno);
 	const char *res_name = pci_resource_name(dev, resno);
 	unsigned long flags;
 	resource_size_t new_size;
@@ -411,7 +411,7 @@ int pci_reassign_resource(struct pci_dev *dev, int resno,
 
 void pci_release_resource(struct pci_dev *dev, int resno)
 {
-	struct resource *res = dev->resource + resno;
+	struct resource *res = pci_resource_n(dev, resno);
 	const char *res_name = pci_resource_name(dev, resno);
 
 	pci_info(dev, "%s %pR: releasing\n", res_name, res);
@@ -428,7 +428,7 @@ EXPORT_SYMBOL(pci_release_resource);
 
 int pci_resize_resource(struct pci_dev *dev, int resno, int size)
 {
-	struct resource *res = dev->resource + resno;
+	struct resource *res = pci_resource_n(dev, resno);
 	struct pci_host_bridge *host;
 	int old, ret;
 	u32 sizes;

base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b
-- 
2.39.5


             reply	other threads:[~2025-02-07 16:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-07 16:23 Ilpo Järvinen [this message]
2025-02-08 18:42 ` [PATCH 1/1] PCI: Cleanup dev->resource + resno to use pci_resource_n() Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250207162301.2842-1-ilpo.jarvinen@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox