From: Niklas Cassel <cassel@kernel.org>
To: bhelgaas@google.com, kw@linux.com, manivannan.sadhasivam@linaro.org
Cc: Frank Li <Frank.Li@nxp.com>,
linux-pci@vger.kernel.org, Damien Le Moal <dlemoal@kernel.org>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
Niklas Cassel <cassel@kernel.org>
Subject: [PATCH] misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
Date: Wed, 2 Apr 2025 10:57:00 +0200 [thread overview]
Message-ID: <20250402085659.4033434-2-cassel@kernel.org> (raw)
Commit a402006d48a9 ("misc: pci_endpoint_test: Remove global 'irq_type'
and 'no_msi'") changed so that the default IRQ vector requested by
pci_endpoint_test_probe() was no longer the module param 'irq_type',
but instead test->irq_type. test->irq_type is by default
IRQ_TYPE_UNDEFINED (until someone calls ioctl(PCITEST_SET_IRQTYPE)).
However, the commit also changed so that after initializing test->irq_type
to IRQ_TYPE_UNDEFINED, it also overrides it with driver_data->irq_type, if
the PCI device and vendor ID provides driver_data.
This causes a regression for PCI device and vendor IDs that do not provide
driver_data, and the driver now fails to probe on such platforms.
Considering that the pci endpoint selftests and the old pcitest always
call ioctl(PCITEST_SET_IRQTYPE) before performing any test that requires
IRQs, simply remove the allocation of IRQs in pci_endpoint_test_probe(),
and defer it until ioctl(PCITEST_SET_IRQTYPE) has been called.
A positive side effect of this is that even if the endpoint controller has
issues with IRQs, the user can do still do all the tests/ioctls() that do
not require working IRQs, e.g. PCITEST_BAR and PCITEST_BARS.
This also means that we can remove the now unused irq_type from
driver_data. The irq_type will always be the one configured by the user
using ioctl(PCITEST_SET_IRQTYPE). (A user that does not know, or care
which irq_type that is used, can use PCITEST_IRQ_TYPE_AUTO. This has
superseded the need for a default irq_type in driver_data.)
Fixes: a402006d48a9c ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
drivers/misc/pci_endpoint_test.c | 21 +--------------------
1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index d294850a35a1..c4e5e2c977be 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -122,7 +122,6 @@ struct pci_endpoint_test {
struct pci_endpoint_test_data {
enum pci_barno test_reg_bar;
size_t alignment;
- int irq_type;
};
static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test,
@@ -948,7 +947,6 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
test_reg_bar = data->test_reg_bar;
test->test_reg_bar = test_reg_bar;
test->alignment = data->alignment;
- test->irq_type = data->irq_type;
}
init_completion(&test->irq_raised);
@@ -970,10 +968,6 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
pci_set_master(pdev);
- ret = pci_endpoint_test_alloc_irq_vectors(test, test->irq_type);
- if (ret)
- goto err_disable_irq;
-
for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
base = pci_ioremap_bar(pdev, bar);
@@ -1009,10 +1003,6 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
goto err_ida_remove;
}
- ret = pci_endpoint_test_request_irq(test);
- if (ret)
- goto err_kfree_test_name;
-
pci_endpoint_test_get_capabilities(test);
misc_device = &test->miscdev;
@@ -1020,7 +1010,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
misc_device->name = kstrdup(name, GFP_KERNEL);
if (!misc_device->name) {
ret = -ENOMEM;
- goto err_release_irq;
+ goto err_kfree_test_name;
}
misc_device->parent = &pdev->dev;
misc_device->fops = &pci_endpoint_test_fops;
@@ -1036,9 +1026,6 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
err_kfree_name:
kfree(misc_device->name);
-err_release_irq:
- pci_endpoint_test_release_irq(test);
-
err_kfree_test_name:
kfree(test->name);
@@ -1051,8 +1038,6 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
pci_iounmap(pdev, test->bar[bar]);
}
-err_disable_irq:
- pci_endpoint_test_free_irq_vectors(test);
pci_release_regions(pdev);
err_disable_pdev:
@@ -1092,23 +1077,19 @@ static void pci_endpoint_test_remove(struct pci_dev *pdev)
static const struct pci_endpoint_test_data default_data = {
.test_reg_bar = BAR_0,
.alignment = SZ_4K,
- .irq_type = PCITEST_IRQ_TYPE_MSI,
};
static const struct pci_endpoint_test_data am654_data = {
.test_reg_bar = BAR_2,
.alignment = SZ_64K,
- .irq_type = PCITEST_IRQ_TYPE_MSI,
};
static const struct pci_endpoint_test_data j721e_data = {
.alignment = 256,
- .irq_type = PCITEST_IRQ_TYPE_MSI,
};
static const struct pci_endpoint_test_data rk3588_data = {
.alignment = SZ_64K,
- .irq_type = PCITEST_IRQ_TYPE_MSI,
};
/*
--
2.49.0
next reply other threads:[~2025-04-02 8:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-02 8:57 Niklas Cassel [this message]
2025-04-02 20:01 ` [PATCH] misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE) Frank Li
2025-04-02 22:44 ` Niklas Cassel
2025-04-03 21:45 ` Frank Li
2025-04-09 7:03 ` Manivannan Sadhasivam
2025-04-14 15:14 ` Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250402085659.4033434-2-cassel@kernel.org \
--to=cassel@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=bhelgaas@google.com \
--cc=dlemoal@kernel.org \
--cc=hayashi.kunihiko@socionext.com \
--cc=kw@linux.com \
--cc=linux-pci@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox