[PATCH AUTOSEL 6.14 052/642] PCI: dwc: ep: Ensure proper iteration over outbound map windows

[Sasha Levin <sashal@kernel.org>]

From: Frank Li <Frank.Li@nxp.com>

[ Upstream commit f3e1dccba0a0833fc9a05fb838ebeb6ea4ca0e1a ]

Most systems' PCIe outbound map windows have non-zero physical addresses,
but the possibility of encountering zero increased after following commit
("PCI: dwc: Use parent_bus_offset").

'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on
some hardware, which trims high address bits through bus fabric before
sending to the PCIe controller.

Replace the iteration logic with 'for_each_set_bit()' to ensure only
allocated map windows are iterated when determining the ATU index from a
given address.

Link: https://lore.kernel.org/r/20250315201548.858189-12-helgaas@kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index e41479a9ca027..c91d095024689 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -282,7 +282,7 @@ static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr,
 	u32 index;
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 
-	for (index = 0; index < pci->num_ob_windows; index++) {
+	for_each_set_bit(index, ep->ob_window_map, pci->num_ob_windows) {
 		if (ep->outbound_addr[index] != addr)
 			continue;
 		*atu_index = index;
-- 
2.39.5