linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Herve Codina <herve.codina@bootlin.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Danilo Krummrich <dakr@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Andi Shyti <andi.shyti@kernel.org>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Peter Rosin <peda@axentia.se>,
	Derek Kiernan <derek.kiernan@amd.com>,
	Dragan Cvetic <dragan.cvetic@amd.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Herve Codina <herve.codina@bootlin.com>,
	Rob Herring <robh@kernel.org>,
	Saravana Kannan <saravanak@google.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Mark Brown <broonie@kernel.org>, Len Brown <lenb@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Daniel Scally <djrscally@gmail.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Wolfram Sang <wsa@kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Davidlohr Bueso <dave@stgolabs.net>,
	Dave Jiang <dave.jiang@intel.com>,
	Alison Schofield <alison.schofield@intel.com>,
	Vishal Verma <vishal.l.verma@intel.com>,
	Ira Weiny <ira.weiny@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	linux-kernel@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-acpi@vger.kernel.org, linux-cxl@vger.kernel.org,
	Allan Nielsen <allan.nielsen@microchip.com>,
	Horatiu Vultur <horatiu.vultur@microchip.com>,
	Steen Hegelund <steen.hegelund@microchip.com>,
	Luca Ceresoli <luca.ceresoli@bootlin.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v3 03/28] of: dynamic: Fix overlayed devices not probing because of fw_devlink
Date: Fri, 13 Jun 2025 15:47:43 +0200	[thread overview]
Message-ID: <20250613134817.681832-4-herve.codina@bootlin.com> (raw)
In-Reply-To: <20250613134817.681832-1-herve.codina@bootlin.com>

From: Saravana Kannan <saravanak@google.com>

When an overlay is applied, if the target device has already probed
successfully and bound to a device, then some of the fw_devlink logic
that ran when the device was probed needs to be rerun. This allows newly
created dangling consumers of the overlayed device tree nodes to be
moved to become consumers of the target device.

Fixes: 1a50d9403fb9 ("treewide: Fix probing of devices in DT overlays")
Reported-by: Herve Codina <herve.codina@bootlin.com>
Closes: https://lore.kernel.org/lkml/CAMuHMdXEnSD4rRJ-o90x4OprUacN_rJgyo8x6=9F9rZ+-KzjOg@mail.gmail.com/
Closes: https://lore.kernel.org/all/20240221095137.616d2aaa@bootlin.com/
Closes: https://lore.kernel.org/lkml/20240312151835.29ef62a0@bootlin.com/
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/lkml/20240411235623.1260061-3-saravanak@google.com/
[Herve: Rebase on top of recent kernel and use get_device_from_fwnode()]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 drivers/base/core.c    | 78 ++++++++++++++++++++++++++++++++++++------
 drivers/of/overlay.c   | 15 ++++++++
 include/linux/fwnode.h |  1 +
 3 files changed, 83 insertions(+), 11 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index 36ccee91ba9a..8fead097c404 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -47,6 +47,8 @@ static bool fw_devlink_drv_reg_done;
 static bool fw_devlink_best_effort;
 static struct workqueue_struct *device_link_wq;
 
+#define get_device_from_fwnode(fwnode)	get_device((fwnode)->dev)
+
 /**
  * __fwnode_link_add - Create a link between two fwnode_handles.
  * @con: Consumer end of the link.
@@ -235,6 +237,70 @@ static void __fw_devlink_pickup_dangling_consumers(struct fwnode_handle *fwnode,
 		__fw_devlink_pickup_dangling_consumers(child, new_sup);
 }
 
+static void fw_devlink_pickup_dangling_consumers(struct device *dev)
+{
+	struct fwnode_handle *child;
+
+	guard(mutex)(&fwnode_link_lock);
+
+	fwnode_for_each_available_child_node(dev->fwnode, child)
+		__fw_devlink_pickup_dangling_consumers(child, dev->fwnode);
+	__fw_devlink_link_to_consumers(dev);
+}
+
+/**
+ * fw_devlink_refresh_fwnode - Recheck the tree under this firmware node
+ * @fwnode: The fwnode under which the fwnode tree has changed
+ *
+ * This function is mainly meant to adjust the supplier/consumer dependencies
+ * after a fwnode tree overlay has occurred.
+ */
+void fw_devlink_refresh_fwnode(struct fwnode_handle *fwnode)
+{
+	struct device *dev;
+
+	/*
+	 * Find the closest ancestor fwnode that has been converted to a device
+	 * that can bind to a driver (bus device).
+	 */
+	fwnode_handle_get(fwnode);
+	do {
+		if (fwnode->flags & FWNODE_FLAG_NOT_DEVICE)
+			continue;
+
+		dev = get_device_from_fwnode(fwnode);
+		if (!dev)
+			continue;
+
+		if (dev->bus)
+			break;
+
+		put_device(dev);
+	} while ((fwnode = fwnode_get_next_parent(fwnode)));
+
+	/*
+	 * If none of the ancestor fwnodes have (yet) been converted to a device
+	 * that can bind to a driver, there's nothing to fix up.
+	 */
+	if (!fwnode)
+		return;
+
+	WARN(device_is_bound(dev) && dev->links.status != DL_DEV_DRIVER_BOUND,
+	     "Don't multithread overlaying and probing the same device!\n");
+
+	/*
+	 * If the device has already bound to a driver, then we need to redo
+	 * some of the work that was done after the device was bound to a
+	 * driver. If the device hasn't bound to a driver, running thing too
+	 * soon would incorrectly pick up consumers that it shouldn't.
+	 */
+	if (dev->links.status == DL_DEV_DRIVER_BOUND)
+		fw_devlink_pickup_dangling_consumers(dev);
+
+	put_device(dev);
+	fwnode_handle_put(fwnode);
+}
+
 static DEFINE_MUTEX(device_links_lock);
 DEFINE_STATIC_SRCU(device_links_srcu);
 
@@ -1313,16 +1379,8 @@ void device_links_driver_bound(struct device *dev)
 	 * child firmware node.
 	 */
 	if (dev->fwnode && dev->fwnode->dev == dev) {
-		struct fwnode_handle *child;
-
 		fwnode_links_purge_suppliers(dev->fwnode);
-
-		guard(mutex)(&fwnode_link_lock);
-
-		fwnode_for_each_available_child_node(dev->fwnode, child)
-			__fw_devlink_pickup_dangling_consumers(child,
-							       dev->fwnode);
-		__fw_devlink_link_to_consumers(dev);
+		fw_devlink_pickup_dangling_consumers(dev);
 	}
 	device_remove_file(dev, &dev_attr_waiting_for_supplier);
 
@@ -1881,8 +1939,6 @@ static void fw_devlink_unblock_consumers(struct device *dev)
 	device_links_write_unlock();
 }
 
-#define get_device_from_fwnode(fwnode)	get_device((fwnode)->dev)
-
 static bool fwnode_init_without_drv(struct fwnode_handle *fwnode)
 {
 	struct device *dev;
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 1af6f52d0708..6bd93153d695 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -185,6 +185,15 @@ static int overlay_notify(struct overlay_changeset *ovcs,
 	return 0;
 }
 
+static void overlay_fw_devlink_refresh(struct overlay_changeset *ovcs)
+{
+	for (int i = 0; i < ovcs->count; i++) {
+		struct device_node *np = ovcs->fragments[i].target;
+
+		fw_devlink_refresh_fwnode(of_fwnode_handle(np));
+	}
+}
+
 /*
  * The values of properties in the "/__symbols__" node are paths in
  * the ovcs->overlay_root.  When duplicating the properties, the paths
@@ -951,6 +960,12 @@ static int of_overlay_apply(struct overlay_changeset *ovcs,
 		pr_err("overlay apply changeset entry notify error %d\n", ret);
 	/* notify failure is not fatal, continue */
 
+	/*
+	 * Needs to happen after changeset notify to give the listeners a chance
+	 * to finish creating all the devices they need to create.
+	 */
+	overlay_fw_devlink_refresh(ovcs);
+
 	ret_tmp = overlay_notify(ovcs, OF_OVERLAY_POST_APPLY);
 	if (ret_tmp)
 		if (!ret)
diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h
index 097be89487bf..a921ca2fe940 100644
--- a/include/linux/fwnode.h
+++ b/include/linux/fwnode.h
@@ -228,6 +228,7 @@ int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup,
 		    u8 flags);
 void fwnode_links_purge(struct fwnode_handle *fwnode);
 void fw_devlink_purge_absent_suppliers(struct fwnode_handle *fwnode);
+void fw_devlink_refresh_fwnode(struct fwnode_handle *fwnode);
 bool fw_devlink_is_strict(void);
 
 #endif
-- 
2.49.0


  parent reply	other threads:[~2025-06-13 13:48 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-13 13:47 [PATCH v3 00/28] lan966x pci device: Add support for SFPs Herve Codina
2025-06-13 13:47 ` [PATCH v3 01/28] Revert "treewide: Fix probing of devices in DT overlays" Herve Codina
2025-06-13 13:47 ` [PATCH v3 02/28] driver core: Rename get_dev_from_fwnode() wrapper to get_device_from_fwnode() Herve Codina
2025-06-27 14:18   ` Rob Herring
2025-06-27 14:52     ` Herve Codina
2025-07-02 18:51     ` Danilo Krummrich
2025-07-02 18:17   ` Rafael J. Wysocki
2025-07-03  8:10     ` Herve Codina
2025-06-13 13:47 ` Herve Codina [this message]
2025-06-13 13:47 ` [PATCH v3 04/28] driver core: Avoid warning when removing a device while its supplier is unbinding Herve Codina
2025-07-02 18:22   ` Rafael J. Wysocki
2025-07-02 21:02     ` Saravana Kannan
2025-06-13 13:47 ` [PATCH v3 05/28] bus: simple-pm-bus: Populate child nodes at probe Herve Codina
2025-06-16 11:28   ` Andy Shevchenko
2025-06-27 15:52   ` Rob Herring
2025-07-03  7:33     ` Herve Codina
2025-07-04  8:57       ` Herve Codina
2025-07-14 17:44         ` Rob Herring
2025-07-15  7:52           ` Herve Codina
2025-06-13 13:47 ` [PATCH v3 06/28] driver core: fw_devlink: Introduce fw_devlink_set_device() Herve Codina
2025-06-13 21:13   ` Saravana Kannan
2025-06-16  7:04     ` Herve Codina
2025-06-27 14:59       ` Herve Codina
2025-06-16 11:32     ` Andy Shevchenko
2025-06-13 13:47 ` [PATCH v3 07/28] drivers: core: Use fw_devlink_set_device() Herve Codina
2025-06-16 11:39   ` Andy Shevchenko
2025-06-13 13:47 ` [PATCH v3 08/28] pinctrl: cs42l43: " Herve Codina
2025-06-16 11:37   ` Andy Shevchenko
2025-06-13 13:47 ` [PATCH v3 09/28] cxl/test: Use device_set_node() Herve Codina
2025-06-13 15:58   ` Dave Jiang
2025-06-13 13:47 ` [PATCH v3 10/28] cxl/test: Use fw_devlink_set_device() Herve Codina
2025-06-13 15:58   ` Dave Jiang
2025-06-13 13:47 ` [PATCH v3 11/28] PCI: of: " Herve Codina
2025-06-16 11:45   ` Andy Shevchenko
2025-06-13 13:47 ` [PATCH v3 12/28] driver core: fw_devlink: Tag the fwnode dev member as private Herve Codina
2025-06-16 11:38   ` Andy Shevchenko
2025-06-13 13:47 ` [PATCH v3 13/28] PCI: of: Set fwnode device of newly created PCI device nodes Herve Codina
2025-06-13 13:47 ` [PATCH v3 14/28] PCI: of: Remove fwnode_dev_initialized() call for a PCI root bridge node Herve Codina
2025-06-13 13:47 ` [PATCH v3 15/28] i2c: core: Introduce i2c_get_adapter_physdev() Herve Codina
2025-07-22 14:04   ` Andi Shyti
2025-06-13 13:47 ` [PATCH v3 16/28] i2c: mux: Set adapter physical device Herve Codina
2025-06-13 13:47 ` [PATCH v3 17/28] i2c: mux: Create missing devlink between mux and " Herve Codina
2025-06-13 13:47 ` [PATCH v3 18/28] of: property: Allow fw_devlink device-tree on x86 when PCI device-tree node creation is enabled Herve Codina
2025-06-27 16:22   ` Rob Herring
2025-06-27 16:33     ` Andy Shevchenko
2025-06-27 17:49       ` Rob Herring
2025-07-03  6:37         ` Herve Codina
2025-06-13 13:47 ` [PATCH v3 19/28] clk: lan966x: Add MCHP_LAN966X_PCI dependency Herve Codina
2025-06-21 21:08   ` Stephen Boyd
2025-06-13 13:48 ` [PATCH v3 20/28] i2c: busses: at91: " Herve Codina
2025-06-13 13:48 ` [PATCH v3 21/28] misc: lan966x_pci: Fix dtso nodes ordering Herve Codina
2025-06-13 13:48 ` [PATCH v3 22/28] misc: lan966x_pci: Split dtso in dtsi/dtso Herve Codina
2025-06-13 13:48 ` [PATCH v3 23/28] misc: lan966x_pci: Rename lan966x_pci.dtso to lan966x_evb_lan9662_nic.dtso Herve Codina
2025-06-13 13:48 ` [PATCH v3 24/28] PCI: Add Microchip LAN9662 PCI Device ID Herve Codina
2025-06-13 21:27   ` Bjorn Helgaas
2025-06-13 13:48 ` [PATCH v3 25/28] misc: lan966x_pci: Introduce board specific data Herve Codina
2025-06-13 13:48 ` [PATCH v3 26/28] misc: lan966x_pci: Add dtsi/dtso nodes in order to support SFPs Herve Codina
2025-06-13 13:48 ` [PATCH v3 27/28] misc: lan966x_pci: Sort the drivers list in Kconfig help Herve Codina
2025-06-13 13:48 ` [PATCH v3 28/28] misc: lan966x_pci: Add drivers needed to support SFPs " Herve Codina
2025-06-27 15:58 ` [PATCH v3 00/28] lan966x pci device: Add support for SFPs Rob Herring
2025-07-03  8:46   ` Herve Codina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250613134817.681832-4-herve.codina@bootlin.com \
    --to=herve.codina@bootlin.com \
    --cc=alison.schofield@intel.com \
    --cc=allan.nielsen@microchip.com \
    --cc=andi.shyti@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=dakr@kernel.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=derek.kiernan@amd.com \
    --cc=devicetree@vger.kernel.org \
    --cc=djrscally@gmail.com \
    --cc=dragan.cvetic@amd.com \
    --cc=festevam@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=horatiu.vultur@microchip.com \
    --cc=imx@lists.linux.dev \
    --cc=ira.weiny@intel.com \
    --cc=kernel@pengutronix.de \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=luca.ceresoli@bootlin.com \
    --cc=mturquette@baylibre.com \
    --cc=peda@axentia.se \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sakari.ailus@linux.intel.com \
    --cc=saravanak@google.com \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=steen.hegelund@microchip.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vishal.l.verma@intel.com \
    --cc=wsa+renesas@sang-engineering.com \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).