From: huaqian.li@siemens.com
To: s-vadapalli@ti.com
Cc: baocheng.su@siemens.com, bhelgaas@google.com,
conor+dt@kernel.org, devicetree@vger.kernel.org,
diogo.ivo@siemens.com, helgaas@kernel.org,
huaqian.li@siemens.com, jan.kiszka@siemens.com,
kristo@kernel.org, krzk+dt@kernel.org, kw@linux.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
lpieralisi@kernel.org, nm@ti.com, robh@kernel.org,
ssantosh@kernel.org, vigneshr@ti.com
Subject: [PATCH v9 (RESEND) 6/7] arm64: dts: ti: k3-am65-main: Add VMAP registers to PCI root complexes
Date: Wed, 16 Jul 2025 13:39:49 +0800 [thread overview]
Message-ID: <20250716053950.199079-7-huaqian.li@siemens.com> (raw)
In-Reply-To: <20250716053950.199079-1-huaqian.li@siemens.com>
From: Jan Kiszka <jan.kiszka@siemens.com>
Rewrap the long lines at this chance.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index be65e6aa7b80..d0036b0aa818 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -897,8 +897,13 @@ main_gpio1: gpio@601000 {
pcie0_rc: pcie@5500000 {
compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
- reg-names = "app", "dbics", "config", "atu";
+ reg = <0x0 0x5500000 0x0 0x1000>,
+ <0x0 0x5501000 0x0 0x1000>,
+ <0x0 0x10000000 0x0 0x2000>,
+ <0x0 0x5506000 0x0 0x1000>,
+ <0x0 0x2900000 0x0 0x1000>,
+ <0x0 0x2908000 0x0 0x1000>;
+ reg-names = "app", "dbics", "config", "atu", "vmap_lp", "vmap_hp";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
@@ -918,8 +923,13 @@ pcie0_rc: pcie@5500000 {
pcie1_rc: pcie@5600000 {
compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
- reg-names = "app", "dbics", "config", "atu";
+ reg = <0x0 0x5600000 0x0 0x1000>,
+ <0x0 0x5601000 0x0 0x1000>,
+ <0x0 0x18000000 0x0 0x2000>,
+ <0x0 0x5606000 0x0 0x1000>,
+ <0x0 0x2910000 0x0 0x1000>,
+ <0x0 0x2918000 0x0 0x1000>;
+ reg-names = "app", "dbics", "config", "atu", "vmap_lp", "vmap_hp";
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
--
2.34.1
next prev parent reply other threads:[~2025-07-16 5:41 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-09 17:03 [PATCH v6 0/7] soc: ti: Add and use PVU on K3-AM65 for DMA isolation Jan Kiszka
2024-09-09 17:03 ` [PATCH v6 1/7] dt-bindings: soc: ti: Add AM65 peripheral virtualization unit Jan Kiszka
2024-09-09 17:03 ` [PATCH v6 2/7] dt-bindings: PCI: ti,am65: Extend for use with PVU Jan Kiszka
2024-09-18 9:11 ` Krzysztof Kozlowski
2024-09-09 17:03 ` [PATCH v6 3/7] soc: ti: Add IOMMU-like PVU driver Jan Kiszka
2024-09-09 17:03 ` [PATCH v6 4/7] PCI: keystone: Add support for PVU-based DMA isolation on AM654 Jan Kiszka
2024-10-30 20:57 ` Bjorn Helgaas
2024-11-03 6:15 ` Vignesh Raghavendra
2024-11-03 9:50 ` Jan Kiszka
2024-09-09 17:03 ` [PATCH v6 5/7] arm64: dts: ti: k3-am65-main: Add PVU nodes Jan Kiszka
2024-09-09 17:03 ` [PATCH v6 6/7] arm64: dts: ti: k3-am65-main: Add VMAP registers to PCI root complexes Jan Kiszka
2024-09-09 17:04 ` [PATCH v6 7/7] arm64: dts: ti: iot2050: Add overlay for DMA isolation for devices behind PCI RC Jan Kiszka
2024-10-30 20:57 ` [PATCH v6 0/7] soc: ti: Add and use PVU on K3-AM65 for DMA isolation Bjorn Helgaas
2025-04-18 7:30 ` [PATCH v7 0/8] " huaqian.li
2025-04-18 7:30 ` [PATCH v7 1/8] dt-bindings: soc: ti: Add AM65 peripheral virtualization unit huaqian.li
2025-04-18 7:30 ` [PATCH v7 2/8] dt-bindings: PCI: ti,am65: Extend for use with PVU huaqian.li
2025-04-18 8:24 ` Rob Herring (Arm)
2025-04-18 7:30 ` [PATCH v7 3/8] soc: ti: Add IOMMU-like PVU driver huaqian.li
2025-04-18 7:30 ` [PATCH v7 4/8] PCI: keystone: Add support for PVU-based DMA isolation on AM654 huaqian.li
2025-04-18 7:30 ` [PATCH v7 5/8] arm64: dts: ti: k3-am65-main: Add PVU nodes huaqian.li
2025-04-18 7:30 ` [PATCH v7 6/8] arm64: dts: ti: k3-am65-main: Add VMAP registers to PCI root complexes huaqian.li
2025-04-18 7:30 ` [PATCH v7 7/8] arm64: dts: ti: iot2050: Add overlay for DMA isolation for devices behind PCI RC huaqian.li
2025-04-18 7:30 ` [PATCH v7 8/8] swiotlb: Make IO_TLB_SEGSIZE configurable huaqian.li
2025-04-18 13:43 ` [PATCH v7 0/8] soc: ti: Add and use PVU on K3-AM65 for DMA isolation Nishanth Menon
2025-04-18 16:34 ` Bjorn Helgaas
2025-04-18 19:04 ` Nishanth Menon
2025-04-22 5:16 ` Li, Hua Qian
2025-04-22 6:13 ` [PATCH v8 " huaqian.li
2025-04-22 6:14 ` [PATCH v8 1/7] dt-bindings: soc: ti: Add AM65 peripheral virtualization unit huaqian.li
2025-04-22 6:14 ` [PATCH v8 2/7] dt-bindings: PCI: ti,am65: Extend for use with PVU huaqian.li
2025-04-22 6:14 ` [PATCH v8 3/7] soc: ti: Add IOMMU-like PVU driver huaqian.li
2025-04-22 6:14 ` [PATCH v8 4/7] PCI: keystone: Add support for PVU-based DMA isolation on AM654 huaqian.li
2025-04-25 16:48 ` Siddharth Vadapalli
2025-07-15 8:55 ` Jan Kiszka
2025-07-15 9:15 ` Siddharth Vadapalli
2025-07-16 5:10 ` [PATCH v9 0/8] soc: ti: Add and use PVU on K3-AM65 for DMA isolation huaqian.li
2025-07-16 5:10 ` [PATCH v9 1/7] dt-bindings: soc: ti: Add AM65 peripheral virtualization unit huaqian.li
2025-07-16 5:10 ` [PATCH v9 2/7] dt-bindings: PCI: ti,am65: Extend for use with PVU huaqian.li
2025-07-16 5:10 ` [PATCH v9 3/7] soc: ti: Add IOMMU-like PVU driver huaqian.li
2025-07-16 5:10 ` [PATCH v9 4/7] PCI: keystone: Add support for PVU-based DMA isolation on AM654 huaqian.li
2025-07-16 5:10 ` [PATCH v9 5/7] arm64: dts: ti: k3-am65-main: Add PVU nodes huaqian.li
2025-07-16 5:10 ` [PATCH v9 6/7] arm64: dts: ti: k3-am65-main: Add VMAP registers to PCI root complexes huaqian.li
2025-07-16 5:10 ` [PATCH v9 7/7] arm64: dts: ti: iot2050: Add overlay for DMA isolation for devices behind PCI RC huaqian.li
2025-07-16 6:02 ` [PATCH v9 0/8] soc: ti: Add and use PVU on K3-AM65 for DMA isolation Krzysztof Kozlowski
2025-07-16 6:37 ` Li, Hua Qian
2025-07-16 5:39 ` [PATCH v9 (RESEND) 0/7] " huaqian.li
2025-07-16 5:39 ` [PATCH v9 (RESEND) 1/7] dt-bindings: soc: ti: Add AM65 peripheral virtualization unit huaqian.li
2025-07-16 5:39 ` [PATCH v9 (RESEND) 2/7] dt-bindings: PCI: ti,am65: Extend for use with PVU huaqian.li
2025-07-16 5:39 ` [PATCH v9 (RESEND) 3/7] soc: ti: Add IOMMU-like PVU driver huaqian.li
2025-07-16 5:39 ` [PATCH v9 (RESEND) 4/7] PCI: keystone: Add support for PVU-based DMA isolation on AM654 huaqian.li
2025-07-16 7:16 ` Siddharth Vadapalli
2025-07-16 5:39 ` [PATCH v9 (RESEND) 5/7] arm64: dts: ti: k3-am65-main: Add PVU nodes huaqian.li
2025-07-16 5:39 ` huaqian.li [this message]
2025-07-16 5:39 ` [PATCH v9 (RESEND) 7/7] arm64: dts: ti: iot2050: Add overlay for DMA isolation for devices behind PCI RC huaqian.li
2025-04-22 6:14 ` [PATCH v8 5/7] arm64: dts: ti: k3-am65-main: Add PVU nodes huaqian.li
2025-04-22 6:14 ` [PATCH v8 6/7] arm64: dts: ti: k3-am65-main: Add VMAP registers to PCI root complexes huaqian.li
2025-04-22 6:14 ` [PATCH v8 7/7] arm64: dts: ti: iot2050: Add overlay for DMA isolation for devices behind PCI RC huaqian.li
2025-04-21 15:07 ` [PATCH v7 0/8] soc: ti: Add and use PVU on K3-AM65 for DMA isolation Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250716053950.199079-7-huaqian.li@siemens.com \
--to=huaqian.li@siemens.com \
--cc=baocheng.su@siemens.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=diogo.ivo@siemens.com \
--cc=helgaas@kernel.org \
--cc=jan.kiszka@siemens.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=s-vadapalli@ti.com \
--cc=ssantosh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).