Linux PCI subsystem development
 help / color / mirror / Atom feed
From: Mario Limonciello <superm1@kernel.org>
To: mario.limonciello@amd.com, bhelgaas@google.com
Cc: Stephen Rothwell <sfr@canb.auug.org.au>, linux-pci@vger.kernel.org
Subject: [PATCH v2] PCI: Adjust visibility of boot_display attribute instead of creation
Date: Sun, 20 Jul 2025 10:15:08 -0500	[thread overview]
Message-ID: <20250720151551.735348-1-superm1@kernel.org> (raw)

From: Mario Limonciello <mario.limonciello@amd.com>

There is a desire to avoid creating new sysfs files late, so instead
of dynamically deciding to create the boot_display attribute, make
it static and use sysfs_update_group() to adjust visibility on the
applicable devices.

This also fixes a compilation warning when compiled without
CONFIG_VIDEO on sparc.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250718224118.5b3f22b0@canb.auug.org.au/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v2:
 * Change to sysfs_update_group() instead
---
 drivers/pci/pci-sysfs.c | 59 +++++++++++++++++------------------------
 1 file changed, 25 insertions(+), 34 deletions(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 6b1a0ae254d3a..462a90d13eb87 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1059,37 +1059,6 @@ void pci_remove_legacy_files(struct pci_bus *b)
 }
 #endif /* HAVE_PCI_LEGACY */
 
-/**
- * pci_create_boot_display_file - create a file in sysfs for @dev
- * @pdev: dev in question
- *
- * Creates a file `boot_display` in sysfs for the PCI device @pdev
- * if it is the boot display device.
- */
-static int pci_create_boot_display_file(struct pci_dev *pdev)
-{
-#ifdef CONFIG_VIDEO
-	if (video_is_primary_device(&pdev->dev))
-		return sysfs_create_file(&pdev->dev.kobj, &dev_attr_boot_display.attr);
-#endif
-	return 0;
-}
-
-/**
- * pci_remove_boot_display_file - remove the boot display file for @dev
- * @pdev: dev in question
- *
- * Removes the file `boot_display` in sysfs for the PCI device @pdev
- * if it is the boot display device.
- */
-static void pci_remove_boot_display_file(struct pci_dev *pdev)
-{
-#ifdef CONFIG_VIDEO
-	if (video_is_primary_device(&pdev->dev))
-		sysfs_remove_file(&pdev->dev.kobj, &dev_attr_boot_display.attr);
-#endif
-}
-
 #if defined(HAVE_PCI_MMAP) || defined(ARCH_GENERIC_PCI_MMAP_RESOURCE)
 /**
  * pci_mmap_resource - map a PCI resource into user memory space
@@ -1691,6 +1660,29 @@ static const struct attribute_group pci_dev_resource_resize_group = {
 	.is_visible = resource_resize_is_visible,
 };
 
+static struct attribute *pci_display_attrs[] = {
+	&dev_attr_boot_display.attr,
+	NULL,
+};
+
+static umode_t pci_boot_display_visible(struct kobject *kobj,
+					struct attribute *a, int n)
+{
+#ifdef CONFIG_VIDEO
+	struct device *dev = kobj_to_dev(kobj);
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	if (a == &dev_attr_boot_display.attr && video_is_primary_device(&pdev->dev))
+		return a->mode;
+#endif
+	return 0;
+}
+
+static const struct attribute_group pci_display_attr_group = {
+	.attrs = pci_display_attrs,
+	.is_visible = pci_boot_display_visible,
+};
+
 int __must_check pci_create_sysfs_dev_files(struct pci_dev *pdev)
 {
 	int retval;
@@ -1698,7 +1690,7 @@ int __must_check pci_create_sysfs_dev_files(struct pci_dev *pdev)
 	if (!sysfs_initialized)
 		return -EACCES;
 
-	retval = pci_create_boot_display_file(pdev);
+	retval = sysfs_update_group(&pdev->dev.kobj, &pci_display_attr_group);
 	if (retval)
 		return retval;
 
@@ -1716,7 +1708,6 @@ void pci_remove_sysfs_dev_files(struct pci_dev *pdev)
 	if (!sysfs_initialized)
 		return;
 
-	pci_remove_boot_display_file(pdev);
 	pci_remove_resource_files(pdev);
 }
 
@@ -1755,7 +1746,6 @@ static umode_t pci_dev_attrs_are_visible(struct kobject *kobj,
 
 	if (a == &dev_attr_boot_vga.attr && pci_is_vga(pdev))
 		return a->mode;
-
 	return 0;
 }
 
@@ -1845,6 +1835,7 @@ static const struct attribute_group pcie_dev_attr_group = {
 
 const struct attribute_group *pci_dev_attr_groups[] = {
 	&pci_dev_attr_group,
+	&pci_display_attr_group,
 	&pci_dev_hp_attr_group,
 #ifdef CONFIG_PCI_IOV
 	&sriov_pf_dev_attr_group,
-- 
2.43.0


             reply	other threads:[~2025-07-20 15:16 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-20 15:15 Mario Limonciello [this message]
2025-07-20 15:34 ` [PATCH v2] PCI: Adjust visibility of boot_display attribute instead of creation Lukas Wunner
2025-07-21  7:15   ` Manivannan Sadhasivam
2025-07-21 15:23     ` Mario Limonciello
2025-07-22 11:02     ` [External] " Shuan He
2025-07-21  9:57 ` Jonathan Cameron
2025-07-21 15:28   ` Mario Limonciello

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250720151551.735348-1-superm1@kernel.org \
    --to=superm1@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=sfr@canb.auug.org.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox