From: <daire.mcnamara@microchip.com>
To: <lpieralisi@kernel.org>, <kw@linux.com>, <robh@kernel.org>,
<bhelgaas@google.com>, <linux-pci@vger.kernel.org>
Cc: Daire McNamara <daire.mcnamara@microchip.com>,
Conor Dooley <conor.dooley@microchip.com>,
Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v11 resend 1/1] PCI: microchip: fix outbound address translation tables
Date: Tue, 5 Aug 2025 16:01:56 +0100 [thread overview]
Message-ID: <20250805150156.12392-1-daire.mcnamara@microchip.com> (raw)
From: Daire McNamara <daire.mcnamara@microchip.com>
On Microchip PolarFire SoC (MPFS) the PCIe Root Port can be behind one of
three general-purpose Fabric Interface Controller (FIC) buses that
encapsulate an AXI-M interface. That FIC is responsible for managing
the translations of the upper 32-bits of the AXI-M address. On MPFS,
the Root Port driver needs to take account of that outbound address
translation done by the parent FIC bus before setting up its own
outbound address translation tables. In all cases on MPFS,
the remaining outbound address translation tables are 32-bit only.
Limit the outbound address translation tables to 32-bit only.
Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip Polarfire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
---
This patch was previously part of the linked series here:
https://lore.kernel.org/linux-pci/20241011140043.1250030-2-daire.mcnamara@microchip.com/
The rest of the linked series has been applied but we've recently
noticed that this one hasn't been applied.
PolarFire SoC PCIe is currently broken in mainline. Can we get this
fixed up and come up with something cross platform later?
V11:
rebased on mainline
.../pci/controller/plda/pcie-microchip-host.c | 31 ++++++++++++++++---
1 file changed, 27 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 24bbf93b8051..db7a2f8452e5 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -26,6 +26,8 @@
#include "../pci-host-common.h"
#include "pcie-plda.h"
+#define MC_OUTBOUND_TRANS_TBL_MASK GENMASK(31, 0)
+
#define MC_MAX_NUM_INBOUND_WINDOWS 8
#define MPFS_NC_BOUNCE_ADDR 0x80000000
@@ -700,6 +702,27 @@ static int mc_pcie_setup_inbound_ranges(struct platform_device *pdev,
return 0;
}
+static int mc_pcie_setup_iomems(struct pci_host_bridge *bridge,
+ struct plda_pcie_rp *port)
+{
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ struct resource_entry *entry;
+ u64 pci_addr;
+ u32 index = 1;
+
+ resource_list_for_each_entry(entry, &bridge->windows) {
+ if (resource_type(entry->res) == IORESOURCE_MEM) {
+ pci_addr = entry->res->start - entry->offset;
+ plda_pcie_setup_window(bridge_base_addr, index,
+ entry->res->start & MC_OUTBOUND_TRANS_TBL_MASK,
+ pci_addr, resource_size(entry->res));
+ index++;
+ }
+ }
+
+ return 0;
+}
+
static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
@@ -708,15 +731,15 @@ static int mc_platform_init(struct pci_config_window *cfg)
int ret;
/* Configure address translation table 0 for PCIe config space */
- plda_pcie_setup_window(port->bridge_base_addr, 0, cfg->res.start,
- cfg->res.start,
- resource_size(&cfg->res));
+ plda_pcie_setup_window(port->bridge_base_addr, 0,
+ cfg->res.start & MC_OUTBOUND_TRANS_TBL_MASK,
+ 0, resource_size(&cfg->res));
/* Need some fixups in config space */
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = plda_pcie_setup_iomems(bridge, &port->plda);
+ ret = mc_pcie_setup_iomems(bridge, &port->plda);
if (ret)
return ret;
--
2.45.2
next reply other threads:[~2025-08-05 15:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-05 15:01 daire.mcnamara [this message]
2025-09-18 23:00 ` [PATCH v11 resend 1/1] PCI: microchip: fix outbound address translation tables Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250805150156.12392-1-daire.mcnamara@microchip.com \
--to=daire.mcnamara@microchip.com \
--cc=bhelgaas@google.com \
--cc=conor.dooley@microchip.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=kw@linux.com \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox