From: hans.zhang@cixtech.com
To: bhelgaas@google.com, lpieralisi@kernel.org, kw@linux.com,
mani@kernel.org, robh@kernel.org, kwilczynski@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org
Cc: mpillai@cadence.com, fugang.duan@cixtech.com,
guoyin.chen@cixtech.com, peter.chen@cixtech.com,
cix-kernel-upstream@cixtech.com, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Hans Zhang <hans.zhang@cixtech.com>
Subject: [PATCH v9 13/14] arm64: dts: cix: Add PCIe Root Complex on sky1
Date: Mon, 1 Sep 2025 17:20:51 +0800 [thread overview]
Message-ID: <20250901092052.4051018-14-hans.zhang@cixtech.com> (raw)
In-Reply-To: <20250901092052.4051018-1-hans.zhang@cixtech.com>
From: Hans Zhang <hans.zhang@cixtech.com>
Add pcie_x*_rc node to support Sky1 PCIe driver based on the
Cadence PCIe core.
Supports Gen1/Gen2/Gen3/Gen4, 1/2/4/8 lane, MSI/MSI-x interrupts
using the ARM GICv3.
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
---
arch/arm64/boot/dts/cix/sky1.dtsi | 126 ++++++++++++++++++++++++++++++
1 file changed, 126 insertions(+)
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index 7dfe7677e649..26c325d8d934 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -288,6 +288,132 @@ mbox_ap2sfh: mailbox@80a0000 {
cix,mbox-dir = "tx";
};
+ pcie_x8_rc: pcie@a010000 {
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a010000 0x00 0x10000>,
+ <0x00 0x2c000000 0x00 0x4000000>,
+ <0x00 0x0a000300 0x00 0x100>,
+ <0x00 0x0a000400 0x00 0x100>,
+ <0x00 0x60000000 0x00 0x00100000>;
+ reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+ ranges = <0x01000000 0x0 0x60100000 0x0 0x60100000 0x0 0x00100000>,
+ <0x02000000 0x0 0x60200000 0x0 0x60200000 0x0 0x1fe00000>,
+ <0x43000000 0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0xc0 0xff>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH 0>;
+ msi-map = <0xc000 &gic_its 0xc000 0x4000>;
+ status = "disabled";
+ };
+
+ pcie_x4_rc: pcie@a070000 {
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a070000 0x00 0x10000>,
+ <0x00 0x29000000 0x00 0x3000000>,
+ <0x00 0x0a060300 0x00 0x40>,
+ <0x00 0x0a060400 0x00 0x40>,
+ <0x00 0x50000000 0x00 0x00100000>;
+ reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+ ranges = <0x01000000 0x00 0x50100000 0x00 0x50100000 0x00 0x00100000>,
+ <0x02000000 0x00 0x50200000 0x00 0x50200000 0x00 0x0fe00000>,
+ <0x43000000 0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x90 0xbf>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH 0>;
+ msi-map = <0x9000 &gic_its 0x9000 0x3000>;
+ status = "disabled";
+ };
+
+ pcie_x2_rc: pcie@a0c0000 {
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a0c0000 0x00 0x10000>,
+ <0x00 0x26000000 0x00 0x3000000>,
+ <0x00 0x0a0600340 0x00 0x20>,
+ <0x00 0x0a0600440 0x00 0x20>,
+ <0x00 0x40000000 0x00 0x00100000>;
+ reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+ ranges = <0x01000000 0x0 0x40100000 0x0 0x40100000 0x0 0x00100000>,
+ <0x02000000 0x0 0x40200000 0x0 0x40200000 0x0 0x0fe00000>,
+ <0x43000000 0x10 0x00000000 0x10 0x00000000 0x04 0x00000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x60 0x8f>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH 0>;
+ msi-map = <0x6000 &gic_its 0x6000 0x3000>;
+ status = "disabled";
+ };
+
+ pcie_x1_0_rc: pcie@a0d0000 {
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a0d0000 0x00 0x10000>,
+ <0x00 0x20000000 0x00 0x3000000>,
+ <0x00 0x0a060360 0x00 0x20>,
+ <0x00 0x0a060460 0x00 0x20>,
+ <0x00 0x30000000 0x00 0x00100000>;
+ reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+ ranges = <0x01000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000>,
+ <0x02000000 0x0 0x30200000 0x0 0x30200000 0x0 0x07e00000>,
+ <0x43000000 0x08 0x00000000 0x08 0x00000000 0x04 0x00000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0x2f>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>;
+ msi-map = <0x0000 &gic_its 0x0000 0x3000>;
+ status = "disabled";
+ };
+
+ pcie_x1_1_rc: pcie@a0e0000 {
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a0e0000 0x00 0x10000>,
+ <0x00 0x23000000 0x00 0x3000000>,
+ <0x00 0x0a060380 0x00 0x20>,
+ <0x00 0x0a060480 0x00 0x20>,
+ <0x00 0x38000000 0x00 0x00100000>;
+ reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+ ranges = <0x01000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>,
+ <0x02000000 0x0 0x38200000 0x0 0x38200000 0x0 0x07e00000>,
+ <0x43000000 0x0C 0x00000000 0x0C 0x00000000 0x04 0x00000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x30 0x5f>;
+ device_type = "pci";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH 0>;
+ msi-map = <0x3000 &gic_its 0x3000 0x3000>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@e010000 {
compatible = "arm,gic-v3";
reg = <0x0 0x0e010000 0 0x10000>, /* GICD */
--
2.49.0
next prev parent reply other threads:[~2025-09-01 9:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-01 9:20 [PATCH v9 00/14] Enhance the PCIe controller driver for next generation controllers hans.zhang
2025-09-01 9:20 ` [PATCH v9 01/14] PCI: cadence: Add module support for platform controller driver hans.zhang
2025-09-01 9:20 ` [PATCH v9 02/14] PCI: cadence: Split PCIe controller header file hans.zhang
2025-09-01 9:20 ` [PATCH v9 03/14] PCI: cadence: Add register definitions for High Perf Architecture (HPA) hans.zhang
2025-09-01 9:20 ` [PATCH v9 04/14] PCI: cadence: Add helper functions for supporting " hans.zhang
2025-09-01 9:20 ` [PATCH v9 05/14] PCI: cadence: Move PCIe EP common functions to a separate file hans.zhang
2025-09-01 9:20 ` [PATCH v9 06/14] PCI: cadence: Move PCIe RP " hans.zhang
2025-09-01 9:20 ` [PATCH v9 07/14] PCI: cadence: Add support for High Perf Architecture (HPA) controller hans.zhang
2025-09-01 9:20 ` [PATCH v9 08/14] PCI: cadence: Update PCIe platform to use register offsets passed hans.zhang
2025-09-01 9:20 ` [PATCH v9 09/14] dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings hans.zhang
2025-09-01 9:20 ` [PATCH v9 10/14] PCI: Add Cix Technology Vendor and Device ID hans.zhang
2025-09-01 9:20 ` [PATCH v9 11/14] PCI: sky1: Add PCIe host support for CIX Sky1 hans.zhang
2025-09-01 9:20 ` [PATCH v9 12/14] MAINTAINERS: add entry for CIX Sky1 PCIe driver hans.zhang
2025-09-01 9:20 ` hans.zhang [this message]
2025-09-01 9:20 ` [PATCH v9 14/14] arm64: dts: cix: Enable PCIe on the Orion O6 board hans.zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250901092052.4051018-14-hans.zhang@cixtech.com \
--to=hans.zhang@cixtech.com \
--cc=bhelgaas@google.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fugang.duan@cixtech.com \
--cc=guoyin.chen@cixtech.com \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mpillai@cadence.com \
--cc=peter.chen@cixtech.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).