[PATCH 03/12] dt-bindings: PCI: qcom,pcie-sdm845: Move SDM845 to dedicated schema

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

Move SDM845 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing and maintenance easier.

New schema is equivalent to the old one with few changes:
 - Adding a required compatible, which is actually redundant.
 - Drop the really obvious comments next to clock/reg/reset-names items.
 - Expecting eight MSI interrupts and one global, instead of only one,
   which was incomplete hardware description.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pci/qcom,pcie-sdm845.yaml  | 190 +++++++++++++++++++++
 .../devicetree/bindings/pci/qcom,pcie.yaml         |  46 -----
 2 files changed, 190 insertions(+), 46 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sdm845.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sdm845.yaml
new file mode 100644
index 000000000000..1ec9e4f3ff57
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sdm845.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <mani@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-sdm845
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: parf
+      - const: dbi
+      - const: elbi
+      - const: config
+      - const: mhi
+
+  clocks:
+    minItems: 7
+    maxItems: 8
+
+  clock-names:
+    minItems: 7
+    items:
+      - const: pipe
+      - const: aux
+      - const: cfg
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a
+      - enum: [ ref, tbu ]
+      - const: tbu
+
+  interrupts:
+    minItems: 8
+    maxItems: 9
+
+  interrupt-names:
+    minItems: 8
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+      - const: global
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+required:
+  - power-domains
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sdm845";
+            reg = <0x0 0x01c00000 0x0 0x2000>,
+                  <0x0 0x60000000 0x0 0xf1d>,
+                  <0x0 0x60000f20 0x0 0xa8>,
+                  <0x0 0x60100000 0x0 0x100000>,
+                  <0x0 0x01c07000 0x0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
+
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            bus-range = <0x00 0xff>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0",
+                              "msi1",
+                              "msi2",
+                              "msi3",
+                              "msi4",
+                              "msi5",
+                              "msi6",
+                              "msi7",
+                              "global";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1c10 0x1>,
+                        <0x100 &apps_smmu 0x1c11 0x1>,
+                        <0x200 &apps_smmu 0x1c12 0x1>,
+                        <0x300 &apps_smmu 0x1c13 0x1>,
+                        <0x400 &apps_smmu 0x1c14 0x1>,
+                        <0x500 &apps_smmu 0x1c15 0x1>,
+                        <0x600 &apps_smmu 0x1c16 0x1>,
+                        <0x700 &apps_smmu 0x1c17 0x1>,
+                        <0x800 &apps_smmu 0x1c18 0x1>,
+                        <0x900 &apps_smmu 0x1c19 0x1>,
+                        <0xa00 &apps_smmu 0x1c1a 0x1>,
+                        <0xb00 &apps_smmu 0x1c1b 0x1>,
+                        <0xc00 &apps_smmu 0x1c1c 0x1>,
+                        <0xd00 &apps_smmu 0x1c1d 0x1>,
+                        <0xe00 &apps_smmu 0x1c1e 0x1>,
+                        <0xf00 &apps_smmu 0x1c1f 0x1>;
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+
+            vddpe-3v3-supply = <&pcie0_3p3v_dual>;
+
+            pcie@0 {
+                device_type = "pci";
+                reg = <0x0 0x0 0x0 0x0 0x0>;
+                bus-range = <0x01 0xff>;
+
+                #address-cells = <3>;
+                #size-cells = <2>;
+                ranges;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index de6439a45ef4..68cae47c2ef6 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -30,7 +30,6 @@ properties:
           - qcom,pcie-ipq9574
           - qcom,pcie-msm8996
           - qcom,pcie-qcs404
-          - qcom,pcie-sdm845
       - items:
           - enum:
               - qcom,pcie-ipq5332
@@ -194,7 +193,6 @@ allOf:
             enum:
               - qcom,pcie-apq8084
               - qcom,pcie-msm8996
-              - qcom,pcie-sdm845
     then:
       properties:
         reg:
@@ -514,49 +512,6 @@ allOf:
             - const: pwr # PWR reset
             - const: ahb # AHB reset
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sdm845
-    then:
-      oneOf:
-          # Unfortunately the "optional" ref clock is used in the middle of the list
-        - properties:
-            clocks:
-              minItems: 8
-              maxItems: 8
-            clock-names:
-              items:
-                - const: pipe # PIPE clock
-                - const: aux # Auxiliary clock
-                - const: cfg # Configuration clock
-                - const: bus_master # Master AXI clock
-                - const: bus_slave # Slave AXI clock
-                - const: slave_q2a # Slave Q2A clock
-                - const: ref # REFERENCE clock
-                - const: tbu # PCIe TBU clock
-        - properties:
-            clocks:
-              minItems: 7
-              maxItems: 7
-            clock-names:
-              items:
-                - const: pipe # PIPE clock
-                - const: aux # Auxiliary clock
-                - const: cfg # Configuration clock
-                - const: bus_master # Master AXI clock
-                - const: bus_slave # Slave AXI clock
-                - const: slave_q2a # Slave Q2A clock
-                - const: tbu # PCIe TBU clock
-      properties:
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
   - if:
       not:
         properties:
@@ -598,7 +553,6 @@ allOf:
               - qcom,pcie-ipq8074-gen3
               - qcom,pcie-msm8996
               - qcom,pcie-msm8998
-              - qcom,pcie-sdm845
     then:
       oneOf:
         - properties:

-- 
2.48.1