linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: "Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Bjorn Andersson" <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 07/12] dt-bindings: PCI: qcom,pcie-ipq8074: Move IPQ8074 to dedicated schema
Date: Mon, 03 Nov 2025 16:14:47 +0100	[thread overview]
Message-ID: <20251103-dt-bindings-pci-qcom-v1-7-c0f6041abf9b@linaro.org> (raw)
In-Reply-To: <20251103-dt-bindings-pci-qcom-v1-0-c0f6041abf9b@linaro.org>

Move IPQ8074 PCIe devices from qcom,pcie.yaml binding to a dedicated
file to make reviewing and maintenance easier.

New schema is equivalent to the old one with few changes:
 - Adding a required compatible, which is actually redundant.
 - Drop the really obvious comments next to clock/reg/reset-names items.
 - Expecting eight MSI interrupts and one global, instead of only one,
   which was incomplete hardware description.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pci/qcom,pcie-ipq8074.yaml | 165 +++++++++++++++++++++
 .../devicetree/bindings/pci/qcom,pcie.yaml         |  35 -----
 2 files changed, 165 insertions(+), 35 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ipq8074.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ipq8074.yaml
new file mode 100644
index 000000000000..da975f943a7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ipq8074.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-ipq8074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ8074 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <mani@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-ipq8074
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: elbi
+      - const: parf
+      - const: config
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: iface # PCIe to SysNOC BIU clock
+      - const: axi_m # AXI Master clock
+      - const: axi_s # AXI Slave clock
+      - const: ahb
+      - const: aux
+
+  interrupts:
+    maxItems: 9
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+      - const: global
+
+  resets:
+    maxItems: 7
+
+  reset-names:
+    items:
+      - const: pipe
+      - const: sleep
+      - const: sticky # Core sticky reset
+      - const: axi_m # AXI master reset
+      - const: axi_s # AXI slave reset
+      - const: ahb
+      - const: axi_m_sticky # AXI master sticky reset
+
+required:
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie@10000000 {
+        compatible = "qcom,pcie-ipq8074";
+        reg = <0x10000000 0xf1d>,
+              <0x10000f20 0xa8>,
+              <0x00088000 0x2000>,
+              <0x10100000 0x1000>;
+        reg-names = "dbi", "elbi", "parf", "config";
+        ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
+                 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
+
+        device_type = "pci";
+        linux,pci-domain = <1>;
+        bus-range = <0x00 0xff>;
+        num-lanes = <1>;
+        max-link-speed = <2>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
+                 <&gcc GCC_PCIE1_AXI_M_CLK>,
+                 <&gcc GCC_PCIE1_AXI_S_CLK>,
+                 <&gcc GCC_PCIE1_AHB_CLK>,
+                 <&gcc GCC_PCIE1_AUX_CLK>;
+        clock-names = "iface",
+                      "axi_m",
+                      "axi_s",
+                      "ahb",
+                      "aux";
+
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi0",
+                          "msi1",
+                          "msi2",
+                          "msi3",
+                          "msi4",
+                          "msi5",
+                          "msi6",
+                          "msi7",
+                          "global";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0x7>;
+        interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                        <0 0 0 2 &intc 0 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                        <0 0 0 3 &intc 0 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                        <0 0 0 4 &intc 0 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+        phys = <&pcie_qmp1>;
+        phy-names = "pciephy";
+
+        resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+                 <&gcc GCC_PCIE1_SLEEP_ARES>,
+                 <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+                 <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
+                 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
+                 <&gcc GCC_PCIE1_AHB_ARES>,
+                 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
+        reset-names = "pipe",
+                      "sleep",
+                      "sticky",
+                      "axi_m",
+                      "axi_s",
+                      "ahb",
+                      "axi_m_sticky";
+
+        perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+
+        pcie@0 {
+            device_type = "pci";
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            bus-range = <0x01 0xff>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index 118b88a81396..992a7654626c 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -23,7 +23,6 @@ properties:
           - qcom,pcie-ipq4019
           - qcom,pcie-ipq8064
           - qcom,pcie-ipq8064-v2
-          - qcom,pcie-ipq8074
           - qcom,pcie-ipq9574
           - qcom,pcie-msm8996
       - items:
@@ -144,7 +143,6 @@ allOf:
               - qcom,pcie-ipq4019
               - qcom,pcie-ipq8064
               - qcom,pcie-ipq8064v2
-              - qcom,pcie-ipq8074
     then:
       properties:
         reg:
@@ -315,37 +313,6 @@ allOf:
         resets: false
         reset-names: false
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-ipq8074
-    then:
-      properties:
-        clocks:
-          minItems: 5
-          maxItems: 5
-        clock-names:
-          items:
-            - const: iface # PCIe to SysNOC BIU clock
-            - const: axi_m # AXI Master clock
-            - const: axi_s # AXI Slave clock
-            - const: ahb # AHB clock
-            - const: aux # Auxiliary clock
-        resets:
-          minItems: 7
-          maxItems: 7
-        reset-names:
-          items:
-            - const: pipe # PIPE reset
-            - const: sleep # Sleep reset
-            - const: sticky # Core Sticky reset
-            - const: axi_m # AXI Master reset
-            - const: axi_s # AXI Slave reset
-            - const: ahb # AHB Reset
-            - const: axi_m_sticky # AXI Master Sticky reset
-
   - if:
       properties:
         compatible:
@@ -405,7 +372,6 @@ allOf:
                 - qcom,pcie-ipq4019
                 - qcom,pcie-ipq8064
                 - qcom,pcie-ipq8064v2
-                - qcom,pcie-ipq8074
                 - qcom,pcie-ipq9574
     then:
       required:
@@ -428,7 +394,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,pcie-ipq8074
               - qcom,pcie-msm8996
               - qcom,pcie-msm8998
     then:

-- 
2.48.1


  parent reply	other threads:[~2025-11-03 15:15 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-03 15:14 [PATCH 00/12] dt-bindings: PCI: qcom: Move remaining devices to dedicated schema Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 01/12] dt-bindings: PCI: qcom,pcie-sm8150: Merge SC8180x into SM8150 Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 02/12] dt-bindings: PCI: qcom,pcie-sdx55: Move SDX55 to dedicated schema Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 03/12] dt-bindings: PCI: qcom,pcie-sdm845: Move SDM845 " Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 04/12] dt-bindings: PCI: qcom,pcie-qcs404: Move QCS404 " Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 05/12] dt-bindings: PCI: qcom,pcie-ipq5018: Move IPQ5018 " Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 06/12] dt-bindings: PCI: qcom,pcie-ipq6018: Move IPQ6018 and IPQ8074 Gen3 " Krzysztof Kozlowski
2025-11-03 15:14 ` Krzysztof Kozlowski [this message]
2025-11-03 15:14 ` [PATCH 08/12] dt-bindings: PCI: qcom,pcie-ipq4019: Move IPQ4019 " Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 09/12] dt-bindings: PCI: qcom,pcie-ipq9574: Move IPQ9574 " Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 10/12] dt-bindings: PCI: qcom,pcie-apq8064: Move APQ8064 " Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 11/12] dt-bindings: PCI: qcom,pcie-msm8996: Move MSM8996 " Krzysztof Kozlowski
2025-11-03 15:14 ` [PATCH 12/12] dt-bindings: PCI: qcom,pcie-apq8084: Move APQ8084 " Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251103-dt-bindings-pci-qcom-v1-7-c0f6041abf9b@linaro.org \
    --to=krzysztof.kozlowski@linaro.org \
    --cc=andersson@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=kwilczynski@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).