From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Dominik Brodowski <linux@dominikbrodowski.net>,
linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 12/23] PCI: Check invalid align earlier in pbus_size_mem()
Date: Fri, 19 Dec 2025 19:40:25 +0200 [thread overview]
Message-ID: <20251219174036.16738-13-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20251219174036.16738-1-ilpo.jarvinen@linux.intel.com>
Check for invalid align before any bridge window sizing actions in
pbus_size_mem() to avoid need to roll back any sizing calculations.
Placing the check earlier will make it easier to add more optional size
related calculations at where the SRIOV logic currently is in
pbus_size_mem().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/pci/setup-bus.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index a5b6c555a45b..3d1d3cefcdba 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -19,6 +19,7 @@
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/minmax.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/errno.h>
@@ -1311,31 +1312,29 @@ static void pbus_size_mem(struct pci_bus *bus, struct resource *b_res,
continue;
r_size = resource_size(r);
-
- /* Put SRIOV requested res to the optional list */
- if (realloc_head && pci_resource_is_optional(dev, i)) {
- add_align = max(pci_resource_alignment(dev, r), add_align);
- add_to_list(realloc_head, dev, r, 0, 0 /* Don't care */);
- children_add_size += r_size;
- continue;
- }
-
+ align = pci_resource_alignment(dev, r);
/*
* aligns[0] is for 1MB (since bridge memory
* windows are always at least 1MB aligned), so
* keep "order" from being negative for smaller
* resources.
*/
- align = pci_resource_alignment(dev, r);
- order = __ffs(align) - __ffs(SZ_1M);
- if (order < 0)
- order = 0;
+ order = max_t(int, __ffs(align) - __ffs(SZ_1M), 0);
if (order >= ARRAY_SIZE(aligns)) {
pci_warn(dev, "%s %pR: disabling; bad alignment %#llx\n",
r_name, r, (unsigned long long) align);
r->flags = 0;
continue;
}
+
+ /* Put SRIOV requested res to the optional list */
+ if (realloc_head && pci_resource_is_optional(dev, i)) {
+ add_align = max(align, add_align);
+ add_to_list(realloc_head, dev, r, 0, 0 /* Don't care */);
+ children_add_size += r_size;
+ continue;
+ }
+
size += max(r_size, align);
aligns[order] += align;
--
2.39.5
next prev parent reply other threads:[~2025-12-19 17:42 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-19 17:40 [PATCH 00/23] PCI: Resource code fixes (supercedes earlier series) & cleanups Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 01/23] PCI: Fix bridge window alignment with optional resources Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 02/23] PCI: Rewrite bridge window head alignment function Ilpo Järvinen
2026-01-26 22:17 ` Bjorn Helgaas
2026-01-27 11:22 ` Ilpo Järvinen
2026-01-27 22:39 ` Bjorn Helgaas
2025-12-19 17:40 ` [PATCH 03/23] PCI: Stop over-estimating bridge window size Ilpo Järvinen
2026-03-05 15:13 ` Guenter Roeck
2026-03-05 16:28 ` Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 04/23] resource: Increase MAX_IORES_LEVEL to 8 Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 05/23] PCI: Remove old_size limit from bridge window sizing Ilpo Järvinen
2026-01-26 17:16 ` Bjorn Helgaas
2026-01-26 20:09 ` Bjorn Helgaas
2026-01-27 11:39 ` Ilpo Järvinen
2026-01-27 22:42 ` Bjorn Helgaas
2026-01-27 10:16 ` Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 06/23] PCI: Push realloc check into pbus_size_mem() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 07/23] PCI: Pass bridge window resource to pbus_size_mem() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 08/23] PCI: Use res_to_dev_res() in reassign_resources_sorted() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 09/23] PCI: Fetch dev_res to local var in __assign_resources_sorted() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 10/23] PCI: Add pci_resource_is_bridge_win() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 11/23] PCI: Log reset and restore of resources Ilpo Järvinen
2025-12-19 17:40 ` Ilpo Järvinen [this message]
2025-12-19 17:40 ` [PATCH 13/23] PCI: Add pbus_mem_size_optional() to handle optional sizes Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 14/23] resource: Mark res given to resource_assigned() as const Ilpo Järvinen
2025-12-19 17:47 ` Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 15/23] PCI: Use resource_assigned() in setup-bus.c algorithm Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 16/23] PCI: Properly prefix struct pci_dev_resource handling functions Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 17/23] PCI: Separate cardbus setup & build it only with CONFIG_CARDBUS Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 18/23] PCI: Handle CardBus specific params in setup-cardbus.c Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 19/23] PCI: Use scnprintf() instead of sprintf() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 20/23] PCI: Add Bus Number + Secondary Latency Timer as dword fields Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 21/23] PCI: Convert to use Bus Number field defines Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 22/23] PCI: Add pbus_validate_busn() for Bus Number validation Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 23/23] PCI: Move scanbus bridge scanning to setup-cardbus.c Ilpo Järvinen
2026-01-26 17:39 ` [PATCH 00/23] PCI: Resource code fixes (supercedes earlier series) & cleanups Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251219174036.16738-13-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@dominikbrodowski.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox