[PATCH v5 0/7] CXL: Add cxl_reset sysfs attribute for PCI devices

[<smadhavan@nvidia.com>]

From: Srirangan Madhavan <smadhavan@nvidia.com>

Hi folks!

This patch series introduces support for the CXL Reset method for CXL
Type 2 devices, implementing the reset procedure outlined in CXL Spec [1]
v3.2, Sections 8.1.3, 9.6 and 9.7.

v5 changes (from v4):
- Rebased on v7.0-rc1 and applied fixes from the review v4.
- Added CXL DVSEC and HDM save/restore as a prerequisite series [2]
- Switched from PCI reset method to sysfs
  interface at /sys/bus/pci/devices/.../cxl_reset (Dan, Alex)
- Removed all PCI core changes - reset logic stays in CXL driver
- Use cpu_cache_invalidate_memregion() instead of arch-specific code
- Removed CONFIG_X86/CONFIG_ARM64 ifdefs
- Added ABI documentation for sysfs interface

v4 changes:
- Fix CXL reset capability check parentheses warning
- Gate CXL reset path on CONFIG_CXL_PCI reachability

v3 changes:
- Restrict CXL reset to Type 2 devices only
- Add host and device cache flushing for sibling functions and region peers
- Add region teardown and memory online detection before reset
- Add configuration state save/restore (DVSEC, HDM, IDE)
- Split the series by subsystem and functional blocks

Motivation:
-----------
- As support for Type 2 devices [6] is being introduced, more devices will
  require finer-grained reset mechanisms beyond bus-wide reset methods.

- FLR does not affect CXL.cache or CXL.mem protocols, making CXL Reset
  the preferred method in some cases.

- The CXL spec (Sections 7.2.3 Binding and Unbinding, 9.5 FLR) highlights use
  cases like function rebinding and error recovery, where CXL Reset is
  explicitly mentioned.

ABI Change reasoning (v5):
-------------------------
Previous versions (v1-v4) integrated CXL reset as a new PCI reset method
in pci_reset_methods[]. Based on feedback from Dan Williams and Alex
Williamson, v5 switches to a sysfs-based approach.

The key reasoning is that CXL Reset has expanded scope than existing PCI
reset methods. Mixing these in the same reset infrastructure causes
problems. Therefore selectively exposing a cxl_reset method in pci-sysfs
and leaving the existing interface unaffected.

Change Description:
-------------------

Patch 1: PCI: Add CXL DVSEC reset and capability register definitions
- Add reset and cache control bit definitions to pci_regs.h

Patch 2: PCI: Export pci_dev_save_and_disable() and pci_dev_restore()
- Export for sibling function save/restore during CXL reset

Patch 3: cxl: Add memory offlining and cache flush helpers
- Offline CXL memory regions before reset
- Flush CPU caches using cpu_cache_invalidate_memregion()

Patch 4: cxl: Add multi-function sibling coordination for CXL reset
- Identify CXL.cachemem sibling functions via Non-CXL Function Map DVSEC
- Save/disable and restore sibling PCI functions around reset

Patch 5: cxl: Add CXL DVSEC reset sequence and flow orchestration
- Implement cxl_dev_reset() to trigger reset via DVSEC
- Poll for reset completion with timeout
- cxl_do_reset() orchestrates the complete reset sequence with
  proper locking and error handling

Patch 6: cxl: Add cxl_reset sysfs interface for PCI devices
- Expose /sys/bus/pci/devices/.../cxl_reset
- Only visible for devices with Reset Capable bit set
- Write "1" to trigger reset

Patch 7: Documentation: ABI: Add CXL PCI cxl_reset sysfs attribute
- Document the new sysfs interface
- Explain scope, visibility, and error conditions

Dependencies:
-------------

This series depends on:
  [PATCH 0/5] PCI/CXL: Save and restore CXL DVSEC and HDM state across resets
  https://lore.kernel.org/linux-cxl/20260306080026.116789-1-smadhavan@nvidia.com/T/#t

The cpu_cache_invalidate_memregion() call used for CPU cache flush currently
has support on x86. ARM64 support will be addressed in a separate RFC.

Command line to test the CXL reset on a capable device:
    echo 1 > /sys/bus/pci/devices/<pci_device>/cxl_reset

Basic cxl_reset testing was done on a CXL Type-2 device: writing to the
sysfs attribute, exercising the DVSEC reset sequence including WB+I and
init reset, restore. Further testing is in progress.

This series is based on v7.0-rc1.

Srirangan Madhavan (7):
  PCI: Add CXL DVSEC reset and capability register definitions
  PCI: Export pci_dev_save_and_disable() and pci_dev_restore()
  cxl: Add memory offlining and cache flush helpers
  cxl: Add multi-function sibling coordination for CXL reset
  cxl: Add CXL DVSEC reset sequence and flow orchestration
  cxl: Add cxl_reset sysfs interface for PCI devices
  Documentation: ABI: Add CXL PCI cxl_reset sysfs attribute

 Documentation/ABI/testing/sysfs-bus-pci |  22 +
 drivers/cxl/core/core.h                 |   2 +
 drivers/cxl/core/pci.c                  | 537 ++++++++++++++++++++++++
 drivers/cxl/core/port.c                 |   3 +
 drivers/pci/pci.c                       |  21 +-
 include/linux/pci.h                     |   3 +
 include/uapi/linux/pci_regs.h           |  14 +
 7 files changed, 600 insertions(+), 2 deletions(-)

base-commit: 6de23f81a5e0
--
2.43.0