From: Thierry Reding <thierry.reding@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Karthikeyan Mitran" <m.karthikeyan@mobiveil.co.in>,
"Hou Zhiqiang" <Zhiqiang.Hou@nxp.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Pali Rohár" <pali@kernel.org>,
"Michal Simek" <michal.simek@amd.com>,
"Kevin Xie" <kevin.xie@starfivetech.com>,
linux-pci@vger.kernel.org
Subject: [PATCH] PCI: Use standard wait times for PCIe link monitoring
Date: Fri, 20 Mar 2026 23:40:44 +0100 [thread overview]
Message-ID: <20260320224044.2569907-1-thierry.reding@kernel.org> (raw)
From: Thierry Reding <treding@nvidia.com>
Instead of defining the wait values for each driver, use common values
defined in the core pci.h header file. Note that most drivers don't use
the millisecond waits, but rather usleep_range(), so add these commonly
used values to the header so that all drivers can use them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
.../pci/controller/cadence/pcie-cadence-host-common.c | 4 ++--
drivers/pci/controller/cadence/pcie-cadence-lga-regs.h | 5 -----
drivers/pci/controller/mobiveil/pcie-mobiveil.c | 4 ++--
drivers/pci/controller/mobiveil/pcie-mobiveil.h | 5 -----
drivers/pci/controller/pci-aardvark.c | 7 ++-----
drivers/pci/controller/pcie-xilinx-nwl.c | 9 ++-------
drivers/pci/controller/plda/pcie-starfive.c | 9 ++-------
drivers/pci/pci.h | 2 ++
8 files changed, 12 insertions(+), 33 deletions(-)
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host-common.c b/drivers/pci/controller/cadence/pcie-cadence-host-common.c
index 2b0211870f02..308844a5ed55 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host-common.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host-common.c
@@ -53,12 +53,12 @@ int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie,
int retries;
/* Check if the link is up or not */
- for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ for (retries = 0; retries < PCIE_LINK_WAIT_MAX_RETRIES; retries++) {
if (pcie_link_up(pcie)) {
dev_info(dev, "Link up\n");
return 0;
}
- usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ usleep_range(PCIE_LINK_WAIT_US_MIN, PCIE_LINK_WAIT_US_MAX);
}
return -ETIMEDOUT;
diff --git a/drivers/pci/controller/cadence/pcie-cadence-lga-regs.h b/drivers/pci/controller/cadence/pcie-cadence-lga-regs.h
index 857b2140c5d2..15dc4fcaf45d 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-lga-regs.h
+++ b/drivers/pci/controller/cadence/pcie-cadence-lga-regs.h
@@ -10,11 +10,6 @@
#include <linux/bitfield.h>
-/* Parameters for the waiting for link up routine */
-#define LINK_WAIT_MAX_RETRIES 10
-#define LINK_WAIT_USLEEP_MIN 90000
-#define LINK_WAIT_USLEEP_MAX 100000
-
/* Local Management Registers */
#define CDNS_PCIE_LM_BASE 0x00100000
diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.c b/drivers/pci/controller/mobiveil/pcie-mobiveil.c
index 62ecbaeb0a60..cc102032c1e6 100644
--- a/drivers/pci/controller/mobiveil/pcie-mobiveil.c
+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.c
@@ -218,11 +218,11 @@ int mobiveil_bringup_link(struct mobiveil_pcie *pcie)
int retries;
/* check if the link is up or not */
- for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ for (retries = 0; retries < PCIE_LINK_WAIT_MAX_RETRIES; retries++) {
if (mobiveil_pcie_link_up(pcie))
return 0;
- usleep_range(LINK_WAIT_MIN, LINK_WAIT_MAX);
+ usleep_range(PCIE_LINK_WAIT_US_MIN, PCIE_LINK_WAIT_US_MAX);
}
dev_err(&pcie->pdev->dev, "link never came up\n");
diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.h b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
index 7246de6a7176..11010a99e27c 100644
--- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
@@ -122,11 +122,6 @@
#define IB_WIN_SIZE ((u64)256 * 1024 * 1024 * 1024)
#define MAX_PIO_WINDOWS 8
-/* Parameters for the waiting for link up routine */
-#define LINK_WAIT_MAX_RETRIES 10
-#define LINK_WAIT_MIN 90000
-#define LINK_WAIT_MAX 100000
-
#define PAGED_ADDR_BNDRY 0xc00
#define OFFSET_TO_PAGE_ADDR(off) \
((off & PAGE_LO_MASK) | PAGED_ADDR_BNDRY)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index e34bea1ff0ac..506323a6c72b 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -255,9 +255,6 @@ enum {
#define PIO_RETRY_CNT 750000 /* 1.5 s */
#define PIO_RETRY_DELAY 2 /* 2 us*/
-#define LINK_WAIT_MAX_RETRIES 10
-#define LINK_WAIT_USLEEP_MIN 90000
-#define LINK_WAIT_USLEEP_MAX 100000
#define RETRAIN_WAIT_MAX_RETRIES 10
#define RETRAIN_WAIT_USLEEP_US 2000
@@ -349,11 +346,11 @@ static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
int retries;
/* check if the link is up or not */
- for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ for (retries = 0; retries < PCIE_LINK_WAIT_MAX_RETRIES; retries++) {
if (advk_pcie_link_up(pcie))
return 0;
- usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ usleep_range(PCIE_LINK_WAIT_US_MIN, PCIE_LINK_WAIT_US_MAX);
}
return -ETIMEDOUT;
diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 7db2c96c6cec..fc65e9fdddb3 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -140,11 +140,6 @@
#define PCIE_PHY_LINKUP_BIT BIT(0)
#define PHY_RDY_LINKUP_BIT BIT(1)
-/* Parameters for the waiting for link up routine */
-#define LINK_WAIT_MAX_RETRIES 10
-#define LINK_WAIT_USLEEP_MIN 90000
-#define LINK_WAIT_USLEEP_MAX 100000
-
struct nwl_msi { /* MSI information */
DECLARE_BITMAP(bitmap, INT_PCI_MSI_NR);
struct irq_domain *dev_domain;
@@ -203,10 +198,10 @@ static int nwl_wait_for_link(struct nwl_pcie *pcie)
int retries;
/* check if the link is up or not */
- for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ for (retries = 0; retries < PCIE_LINK_WAIT_MAX_RETRIES; retries++) {
if (nwl_phy_link_up(pcie))
return 0;
- usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ usleep_range(PCIE_LINK_WAIT_US_MIN, PCIE_LINK_WAIT_US_MAX);
}
dev_err(dev, "PHY link never came up\n");
diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
index 298036c3e7f9..542a751b6f4d 100644
--- a/drivers/pci/controller/plda/pcie-starfive.c
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -45,11 +45,6 @@
#define STG_SYSCON_LNKSTA_OFFSET 0x170
#define DATA_LINK_ACTIVE BIT(5)
-/* Parameters for the waiting for link up routine */
-#define LINK_WAIT_MAX_RETRIES 10
-#define LINK_WAIT_USLEEP_MIN 90000
-#define LINK_WAIT_USLEEP_MAX 100000
-
struct starfive_jh7110_pcie {
struct plda_pcie_rp plda;
struct reset_control *resets;
@@ -217,12 +212,12 @@ static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
int retries;
/* Check if the link is up or not */
- for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ for (retries = 0; retries < PCIE_LINK_WAIT_MAX_RETRIES; retries++) {
if (starfive_pcie_link_up(&pcie->plda)) {
dev_info(pcie->plda.dev, "port link up\n");
return 0;
}
- usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ usleep_range(PCIE_LINK_WAIT_US_MIN, PCIE_LINK_WAIT_US_MAX);
}
return -ETIMEDOUT;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index e542d1bf2853..0ca1c159b458 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -63,6 +63,8 @@ struct pcie_tlp_log;
/* Parameters for the waiting for link up routine */
#define PCIE_LINK_WAIT_MAX_RETRIES 10
#define PCIE_LINK_WAIT_SLEEP_MS 90
+#define PCIE_LINK_WAIT_US_MIN 90000
+#define PCIE_LINK_WAIT_US_MAX 100000
/* Format of TLP; PCIe r7.0, sec 2.2.1 */
#define PCIE_TLP_FMT_3DW_NO_DATA 0x00 /* 3DW header, no data */
--
2.52.0
next reply other threads:[~2026-03-20 22:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-20 22:40 Thierry Reding [this message]
2026-03-20 22:47 ` [PATCH] PCI: Use standard wait times for PCIe link monitoring Thierry Reding
2026-03-21 9:44 ` kernel test robot
2026-03-21 10:17 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260320224044.2569907-1-thierry.reding@kernel.org \
--to=thierry.reding@kernel.org \
--cc=Zhiqiang.Hou@nxp.com \
--cc=bhelgaas@google.com \
--cc=kevin.xie@starfivetech.com \
--cc=kwilczynski@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=m.karthikeyan@mobiveil.co.in \
--cc=mani@kernel.org \
--cc=michal.simek@amd.com \
--cc=pali@kernel.org \
--cc=robh@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox