From: Nathan Lynch via B4 Relay <devnull+nathan.lynch.amd.com@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Wei Huang <wei.huang2@amd.com>,
Mario Limonciello <mario.limonciello@amd.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Jonathan Cameron <jonathan.cameron@huawei.com>,
Stephen Bates <Stephen.Bates@amd.com>,
PradeepVineshReddy.Kodamati@amd.com, John.Kariuki@amd.com,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
dmaengine@vger.kernel.org, Nathan Lynch <nathan.lynch@amd.com>
Subject: [PATCH 09/23] dmaengine: sdxi: Start functions on probe, stop on remove
Date: Fri, 10 Apr 2026 08:07:19 -0500 [thread overview]
Message-ID: <20260410-sdxi-base-v1-9-1d184cb5c60a@amd.com> (raw)
In-Reply-To: <20260410-sdxi-base-v1-0-1d184cb5c60a@amd.com>
From: Nathan Lynch <nathan.lynch@amd.com>
Following admin context setup in the previous patch, drive each SDXI
function to active state during probe. This is done by writing
GSRV_ACTIVE to MMIO_CTL0.fn_gsr and polling MMIO_STS0.fn_gsv until the
function reaches GSV_ACTIVE or an error state. A 1-second timeout has
been sufficient in practice so far.
Introduce sdxi_unregister() to stop the function during remove and wire
it up via the pci_driver .remove callback.
Co-developed-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
---
drivers/dma/sdxi/device.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++-
drivers/dma/sdxi/pci.c | 6 +++++
drivers/dma/sdxi/sdxi.h | 1 +
3 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/sdxi/device.c b/drivers/dma/sdxi/device.c
index 636abc410dcd..145aa098c269 100644
--- a/drivers/dma/sdxi/device.c
+++ b/drivers/dma/sdxi/device.c
@@ -67,6 +67,49 @@ static void sdxi_write_fn_gsr(struct sdxi_dev *sdxi, enum sdxi_fn_gsr cmd)
sdxi_write64(sdxi, SDXI_MMIO_CTL0, ctl0);
}
+static int sdxi_dev_start(struct sdxi_dev *sdxi)
+{
+ unsigned long deadline;
+ enum sdxi_fn_gsv status;
+
+ status = sdxi_dev_gsv(sdxi);
+ if (status != SDXI_GSV_STOP) {
+ sdxi_err(sdxi,
+ "can't activate busy device (unexpected gsv: %s)\n",
+ gsv_str(status));
+ return -EIO;
+ }
+
+ sdxi_write_fn_gsr(sdxi, SDXI_GSRV_ACTIVE);
+
+ deadline = jiffies + msecs_to_jiffies(1000);
+ do {
+ status = sdxi_dev_gsv(sdxi);
+ sdxi_dbg(sdxi, "%s: function state: %s\n", __func__, gsv_str(status));
+
+ switch (status) {
+ case SDXI_GSV_ACTIVE:
+ sdxi_dbg(sdxi, "activated\n");
+ return 0;
+ case SDXI_GSV_ERROR:
+ sdxi_err(sdxi, "went to error state\n");
+ return -EIO;
+ case SDXI_GSV_INIT:
+ case SDXI_GSV_STOP:
+ /* transitional states, wait */
+ fsleep(1000);
+ break;
+ default:
+ sdxi_err(sdxi, "unexpected gsv %u, giving up\n", status);
+ return -EIO;
+ }
+ } while (time_before(jiffies, deadline));
+
+ sdxi_err(sdxi, "activation timed out, current status %u\n",
+ sdxi_dev_gsv(sdxi));
+ return -ETIMEDOUT;
+}
+
/* Get the device to the GSV_STOP state. */
static int sdxi_dev_stop(struct sdxi_dev *sdxi)
{
@@ -197,7 +240,11 @@ static int sdxi_fn_activate(struct sdxi_dev *sdxi)
if (err)
return err;
- return 0;
+ /*
+ * SDXI 1.0 4.1.8.9: Set MMIO_CTL0.fn_gsr to GSRV_ACTIVE and
+ * wait for MMIO_STS0.fn_gsv to reach GSV_ACTIVE or GSV_ERROR.
+ */
+ return sdxi_dev_start(sdxi);
}
static int sdxi_create_dma_pool(struct sdxi_dev *sdxi, struct dma_pool **pool,
@@ -250,3 +297,10 @@ int sdxi_register(struct device *dev, const struct sdxi_bus_ops *ops)
return sdxi_device_init(sdxi);
}
+
+void sdxi_unregister(struct device *dev)
+{
+ struct sdxi_dev *sdxi = dev_get_drvdata(dev);
+
+ sdxi_dev_stop(sdxi);
+}
diff --git a/drivers/dma/sdxi/pci.c b/drivers/dma/sdxi/pci.c
index f3f8485e50e3..8e4dfde078ff 100644
--- a/drivers/dma/sdxi/pci.c
+++ b/drivers/dma/sdxi/pci.c
@@ -67,6 +67,11 @@ static int sdxi_pci_probe(struct pci_dev *pdev,
return sdxi_register(&pdev->dev, &sdxi_pci_ops);
}
+static void sdxi_pci_remove(struct pci_dev *pdev)
+{
+ sdxi_unregister(&pdev->dev);
+}
+
static const struct pci_device_id sdxi_id_table[] = {
{ PCI_DEVICE_CLASS(PCI_CLASS_ACCELERATOR_SDXI, 0xffffff) },
{ }
@@ -77,6 +82,7 @@ static struct pci_driver sdxi_driver = {
.name = "sdxi",
.id_table = sdxi_id_table,
.probe = sdxi_pci_probe,
+ .remove = sdxi_pci_remove,
.sriov_configure = pci_sriov_configure_simple,
};
diff --git a/drivers/dma/sdxi/sdxi.h b/drivers/dma/sdxi/sdxi.h
index bbc14364a5c9..426101875334 100644
--- a/drivers/dma/sdxi/sdxi.h
+++ b/drivers/dma/sdxi/sdxi.h
@@ -75,6 +75,7 @@ static inline struct device *sdxi_to_dev(const struct sdxi_dev *sdxi)
#define sdxi_err(s, fmt, ...) dev_err(sdxi_to_dev(s), fmt, ## __VA_ARGS__)
int sdxi_register(struct device *dev, const struct sdxi_bus_ops *ops);
+void sdxi_unregister(struct device *dev);
static inline u64 sdxi_read64(const struct sdxi_dev *sdxi, enum sdxi_reg reg)
{
--
2.53.0
next prev parent reply other threads:[~2026-04-10 13:07 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-10 13:07 [PATCH 00/23] dmaengine: Smart Data Accelerator Interface (SDXI) basic support Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 01/23] PCI: Add SNIA SDXI accelerator sub-class Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 02/23] MAINTAINERS: Add entry for SDXI driver Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 03/23] dmaengine: sdxi: Add PCI initialization Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 04/23] dmaengine: sdxi: Feature discovery and initial configuration Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 05/23] dmaengine: sdxi: Configure context tables Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 06/23] dmaengine: sdxi: Allocate DMA pools Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 07/23] dmaengine: sdxi: Allocate administrative context Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 08/23] dmaengine: sdxi: Install " Nathan Lynch via B4 Relay
2026-04-10 13:07 ` Nathan Lynch via B4 Relay [this message]
2026-04-10 13:07 ` [PATCH 10/23] dmaengine: sdxi: Complete administrative context jump start Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 11/23] dmaengine: sdxi: Add client context alloc and release APIs Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 12/23] dmaengine: sdxi: Add descriptor ring management Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 13/23] dmaengine: sdxi: Add unit tests for descriptor ring reservations Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 14/23] dmaengine: sdxi: Attach descriptor ring state to contexts Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 15/23] dmaengine: sdxi: Per-context access key (AKey) table entry allocator Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 16/23] dmaengine: sdxi: Generic descriptor manipulation helpers Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 17/23] dmaengine: sdxi: Add completion status block API Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 18/23] dmaengine: sdxi: Encode context start, stop, and sync descriptors Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 19/23] dmaengine: sdxi: Provide context start and stop APIs Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 20/23] dmaengine: sdxi: Encode nop, copy, and interrupt descriptors Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 21/23] dmaengine: sdxi: Add unit tests for descriptor encoding Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 22/23] dmaengine: sdxi: MSI/MSI-X vector allocation and mapping Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 23/23] dmaengine: sdxi: Add DMA engine provider Nathan Lynch via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260410-sdxi-base-v1-9-1d184cb5c60a@amd.com \
--to=devnull+nathan.lynch.amd.com@kernel.org \
--cc=John.Kariuki@amd.com \
--cc=PradeepVineshReddy.Kodamati@amd.com \
--cc=Stephen.Bates@amd.com \
--cc=bhelgaas@google.com \
--cc=dmaengine@vger.kernel.org \
--cc=jonathan.cameron@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=nathan.lynch@amd.com \
--cc=vkoul@kernel.org \
--cc=wei.huang2@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox