From: Szymon Durawa <szymon.durawa@linux.intel.com>
To: helgaas@kernel.org, nirmal.patel@linux.intel.com,
szymon.durawa@linux.intel.com, djbw@kernel.org,
linux-pci@vger.kernel.org, lukas@wunner.de
Subject: [PATCH v7 5/8] PCI: vmd: Replace hardcoded values with enum and defines
Date: Wed, 2 Sep 2026 17:58:41 +0000 [thread overview]
Message-ID: <20260902175846.3497854-6-szymon.durawa@linux.intel.com> (raw)
In-Reply-To: <20260902175846.3497854-1-szymon.durawa@linux.intel.com>
Add enum vmd_resource type to replace hardcoded values. Add defines for
vmd bus start number based on VMD restriction value. No functional
changes.
Suggested-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Szymon Durawa <szymon.durawa@linux.intel.com>
---
drivers/pci/controller/vmd.c | 45 ++++++++++++++++++++++++------------
1 file changed, 30 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index e19b7fcb2025..79ae4a62e29e 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -26,6 +26,11 @@
#define VMD_MEMBAR1 2
#define VMD_MEMBAR2 4
+/* VMD restriction value determines secondary start bus number */
+#define VMD_RESTRICT_0_BUS_START 0x0
+#define VMD_RESTRICT_1_BUS_START 0x80
+#define VMD_RESTRICT_2_BUS_START 0xE0
+
#define PCI_REG_VMCAP 0x40
#define BUS_RESTRICT_CAP(vmcap) (vmcap & 0x1)
#define PCI_REG_VMCONFIG 0x44
@@ -43,6 +48,13 @@
#define BASE_ID_REG_28C1 0x2840
#define MEMBAR2_OFFSET_28C1 0x30d0
+enum vmd_resource {
+ VMD_RES_CFGBAR = 0, /* VMD Bus0 Config BAR */
+ VMD_RES_MBAR_1, /* VMD Bus0 Resource MemBAR 1 */
+ VMD_RES_MBAR_2, /* VMD Bus0 Resource MemBAR 2 */
+ VMD_RES_COUNT
+};
+
enum vmd_features {
/*
* Device may contain registers which hint the physical location of the
@@ -150,7 +162,7 @@ struct vmd_dev {
struct vmd_irq_list *irqs;
struct pci_sysdata sysdata;
- struct resource resources[3];
+ struct resource resources[VMD_RES_COUNT];
struct irq_domain *irq_domain;
struct pci_bus *bus;
u8 busn_start;
@@ -562,7 +574,7 @@ static resource_size_t vmd_cfgbar_ecam_space(struct vmd_dev *vmd)
}
static void vmd_domain_reset(struct vmd_dev *vmd)
{
- u16 bus, max_buses = resource_size(&vmd->resources[0]);
+ u16 bus, max_buses = resource_size(&vmd->resources[VMD_RES_CFGBAR]);
u8 dev, functions, fn, hdr_type;
unsigned int ecam_bus;
char __iomem *base;
@@ -613,8 +625,8 @@ static void vmd_domain_reset(struct vmd_dev *vmd)
static void vmd_attach_resources(struct vmd_dev *vmd)
{
- vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
- vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[2];
+ vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[VMD_RES_MBAR_1];
+ vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[VMD_RES_MBAR_2];
}
static void vmd_detach_resources(struct vmd_dev *vmd)
@@ -688,13 +700,13 @@ static int vmd_get_bus_number_start(struct vmd_dev *vmd)
switch (BUS_RESTRICT_CFG(reg)) {
case 0:
- vmd->busn_start = 0;
+ vmd->busn_start = VMD_RESTRICT_0_BUS_START;
break;
case 1:
- vmd->busn_start = 128;
+ vmd->busn_start = VMD_RESTRICT_1_BUS_START;
break;
case 2:
- vmd->busn_start = 224;
+ vmd->busn_start = VMD_RESTRICT_2_BUS_START;
break;
default:
pci_err(dev, "Unknown Bus Offset Setting (%d)\n",
@@ -910,7 +922,7 @@ static void vmd_configure_cfgbar(struct vmd_dev *vmd)
/* Do not let resource[0] end go out of bound.*/
busn_end = vmd->busn_start + (resource_size(res) >> 20) - 1;
busn_end = min_t(resource_size_t, busn_end, 0xff);
- vmd->resources[0] = (struct resource) {
+ vmd->resources[VMD_RES_CFGBAR] = (struct resource) {
.name = "VMD CFGBAR",
.start = vmd->busn_start,
.end = busn_end,
@@ -967,14 +979,15 @@ static int vmd_configure_membar1_membar2(struct vmd_dev *vmd,
{
int ret;
- ret = vmd_configure_membar(vmd, 1, VMD_MEMBAR1, 0, 0);
+ ret = vmd_configure_membar(vmd, VMD_RES_MBAR_1, VMD_MEMBAR1, 0, 0);
if (ret)
return ret;
- ret = vmd_configure_membar(vmd, 2, VMD_MEMBAR2, mbar2_ofs, 0);
+ ret = vmd_configure_membar(vmd, VMD_RES_MBAR_2, VMD_MEMBAR2, mbar2_ofs, 0);
if (ret) {
- devm_kfree(&vmd->dev->dev, (void *)vmd->resources[1].name);
- memset(&vmd->resources[1], 0, sizeof(vmd->resources[1]));
+ devm_kfree(&vmd->dev->dev, (void *)vmd->resources[VMD_RES_MBAR_1].name);
+ memset(&vmd->resources[VMD_RES_MBAR_1], 0,
+ sizeof(vmd->resources[VMD_RES_MBAR_1]));
return ret;
}
@@ -986,9 +999,11 @@ static int vmd_create_bus(struct vmd_dev *vmd, struct pci_sysdata *sd,
{
LIST_HEAD(resources);
- pci_add_resource(&resources, &vmd->resources[0]);
- pci_add_resource_offset(&resources, &vmd->resources[1], offset[0]);
- pci_add_resource_offset(&resources, &vmd->resources[2], offset[1]);
+ pci_add_resource(&resources, &vmd->resources[VMD_RES_CFGBAR]);
+ pci_add_resource_offset(&resources, &vmd->resources[VMD_RES_MBAR_1],
+ offset[0]);
+ pci_add_resource_offset(&resources, &vmd->resources[VMD_RES_MBAR_2],
+ offset[1]);
vmd->bus = pci_create_root_bus(&vmd->dev->dev, vmd->busn_start,
&vmd_ops, sd, &resources);
--
2.43.0
next prev parent reply other threads:[~2026-09-02 15:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-02 17:58 [PATCH v7 0/8] PCI: vmd: Add support for second rootbus under VMD Szymon Durawa
2026-09-02 17:58 ` [PATCH v7 1/8] PCI: vmd: Add vmd_bus_enumeration() helper function Szymon Durawa
2026-09-02 17:58 ` [PATCH v7 2/8] PCI: vmd: Add vmd_configure_cfgbar() " Szymon Durawa
2026-09-02 17:58 ` [PATCH v7 3/8] PCI: vmd: Add vmd_configure_membar() and vmd_configure_membar1_membar2() Szymon Durawa
2026-09-02 17:58 ` [PATCH v7 4/8] PCI: vmd: Add vmd_create_bus() Szymon Durawa
2026-09-02 17:58 ` Szymon Durawa [this message]
2026-09-02 17:58 ` [PATCH v7 6/8] PCI: vmd: Convert bus and busn_start to an array Szymon Durawa
2026-09-02 17:58 ` [PATCH v7 7/8] PCI: vmd: Add support for second rootbus under VMD Szymon Durawa
2026-09-02 17:58 ` [PATCH v7 8/8] PCI: vmd: Add workaround for bus number hardwired to fixed non-zero value Szymon Durawa
2026-09-03 20:58 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260902175846.3497854-6-szymon.durawa@linux.intel.com \
--to=szymon.durawa@linux.intel.com \
--cc=djbw@kernel.org \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=nirmal.patel@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox