[PATCH] PCI: Accept AtomicOps already enabled by the hypervisor

[Nikola Prica <nikprica@amd.com>]

From: Nikola Prica <nikola.prica@amd.com>

pci_enable_atomic_ops_to_root() currently fails when no Root Port is
visible. That is common in passthrough guests (ESXi, Hyper-V): the
endpoint is assigned to the VM, but the guest topology has no Root
Port above it.

In those setups the hypervisor may already have enabled AtomicOp
Requester Enable on the device. If PCI_EXP_DEVCTL2_ATOMIC_REQ is set,
treat AtomicOps as already enabled and return success instead of
failing the Root Port walk.

Signed-off-by: Nikola Prica <nikola.prica@amd.com>
---
 drivers/pci/pci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b2879a6be5f8..7c62c7f31757 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3768,6 +3768,14 @@ int pci_enable_atomic_ops_to_root(struct pci_dev *dev, u32 cap_mask)
 		return -EINVAL;
 	}
 
+	/*
+	 * Some hypervisors already set AtomicOp Requester Enable.  If it
+	 * is already set, there is nothing more to do.
+	 */
+	pcie_capability_read_dword(dev, PCI_EXP_DEVCTL2, &ctl2);
+	if (ctl2 & PCI_EXP_DEVCTL2_ATOMIC_REQ)
+		return 0;
+
 	root = pcie_find_root_port(dev);
 	if (!root)
 		return -EINVAL;

base-commit: 89a312991dc6e638a36adc43ccb91dbc25504c04
-- 
2.34.1