Re: [PATCH v6 06/11] Bluetooth: hci_qca: Set 'bt_en_available' based on pwrseq power controllability

[sashiko-bot@kernel.org]

> A Bluetooth device only needs the non-persistent setup if the host can
> gate its power, so that it is actually reset on the next power-on. When the
> power is controlled by a power sequencer, whether the host can gate it
> depends on the hardware wiring, e.g. the presence of the BT_EN or
> W_DISABLE2# line.
> 
> Query the generic pwrseq_is_controllable() helper whenever the BT power
> comes from a sequencer, regardless of which provider it is (M2, WCN, ...).
> If the power is not controllable, clear 'bt_en_available' so that
> HCI_QUIRK_NON_PERSISTENT_SETUP is not set.
> 
> This is based on Manivannan's original patch that keyed the decision off
> the W_DISABLE2# device tree property, it now uses the generic pwrseq helper
> and handles the always-on case.
> 
> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
> Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260904-monza-wireless-v6-0-d8c5042b3efd@oss.qualcomm.com?part=6