Re: [PATCH v3 4/5] PCI/pwrctrl: tc9563: Switch per-port reset to GPIO descriptor API

[sashiko-bot@kernel.org]

> Remove the local TC9563_GPIO_MASK and TC9563_GPIO_DEASSERT_BITS
> definitions, which are no longer used after switching to the GPIO
> descriptor API. Move TC9563_GPIO_CONFIG and TC9563_RESET_GPIO
> definitions in tc9563.h header file.
> 
> Replace the direct regmap-based per-port reset logic in
> assert_deassert_reset() with gpiod_direction_output() calls, falling
> back to the legacy regmap approach only when no reset-gpios DT
> property is present for a given port.
> 
> Add the reset GPIO pointer to struct tc9563_pwrctrl_cfg and introduce
> tc9563_pwrctrl_parse_reset_line() to look up reset-gpios from each
> PCI downstream port child node. The lookup is done lazily at the
> beginning of power_on(), returning -EPROBE_DEFER until the GPIO chip
> is registered.
> 
> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260904-pci-tc9563-aux-v3-0-5b1449d62ba2@oss.qualcomm.com?part=4