From: Breno Rodrigues Alves <breno3011alves@gmail.com>
To: torvalds@linux-foundation.org
Cc: linux-kernel@vger.kernel.org, gregkh@linuxfoundation.org,
arnd@arndb.de, linux-clk@vger.kernel.org,
linux-input@vger.kernel.org, linux-media@vger.kernel.org,
linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
linux-sound@vger.kernel.org, linux-staging@lists.linux.dev,
linux-fbdev@vger.kernel.org,
linux-security-module@vger.kernel.org,
Breno Rodrigues Alves <breno3011alves@gmail.com>
Subject: [PATCH v4] Kconfig: fix typos in core makefiles/code and purge remaining ghosts (v4)
Date: Fri, 4 Sep 2026 21:16:31 -0300 [thread overview]
Message-ID: <20260905001631.108652-1-breno3011alves@gmail.com> (raw)
Following precise automated feedback from Sashiko AI, the active
lcd-panel-cgram documentation has been completely retained to prevent
UAPI/Sphinx tree-wide translation breaks.
This version properly stages and includes the intended bugfixes:
- Fixes MediaTek interconnect typo mapping mt8196.o to MT8196.
- Fixes MediaTek regulator typo mapping mt6316-regulator to MT6316.
- Fixes missing CONFIG_ prefix on DVB_ULE_DEBUG macro in dvb_net.c.
- Cleans up the dangling comment in drivers/leds/Kconfig.
- Purges the remaining verified ghost weight.
Signed-off-by: Breno Rodrigues Alves <breno3011alves@gmail.com>
---
drivers/interconnect/mediatek/Makefile | 2 +-
drivers/leds/Kconfig | 1 -
drivers/media/dvb-core/dvb_net.c | 6 +++---
drivers/regulator/Makefile | 2 +-
4 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/interconnect/mediatek/Makefile b/drivers/interconnect/mediatek/Makefile
index 6bd656668..64170ab16 100644
--- a/drivers/interconnect/mediatek/Makefile
+++ b/drivers/interconnect/mediatek/Makefile
@@ -3,4 +3,4 @@
obj-$(CONFIG_INTERCONNECT_MTK_DVFSRC_EMI) += icc-emi.o
obj-$(CONFIG_INTERCONNECT_MTK_MT8183) += mt8183.o
obj-$(CONFIG_INTERCONNECT_MTK_MT8195) += mt8195.o
-obj-$(CONFIG_INTERCONNECT_MTK_MT8195) += mt8196.o
+obj-$(CONFIG_INTERCONNECT_MTK_MT8196) += mt8196.o
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index d0d318223..800fbd560 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -873,7 +873,6 @@ config LEDS_UPBOARD
This driver can also be built as a module. If so the module will be
called leds-upboard.
-comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
config LEDS_BLINKM
tristate "LED support for the BlinkM I2C RGB LED"
diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c
index a2159b2bc..3b503695e 100644
--- a/drivers/media/dvb-core/dvb_net.c
+++ b/drivers/media/dvb-core/dvb_net.c
@@ -68,7 +68,7 @@ static inline __u32 iov_crc32( __u32 c, struct kvec *iov, unsigned int cnt )
#define DVB_NET_MULTICAST_MAX 10
-#ifdef DVB_ULE_DEBUG
+#ifdef CONFIG_DVB_ULE_DEBUG
/*
* The code inside DVB_ULE_DEBUG keeps a history of the
* last 100 TS cells processed.
@@ -320,7 +320,7 @@ static int dvb_net_ule_new_ts_cell(struct dvb_net_ule_handle *h)
{
/* We are about to process a new TS cell. */
-#ifdef DVB_ULE_DEBUG
+#ifdef CONFIG_DVB_ULE_DEBUG
if (ule_where >= &ule_hist[100*TS_SZ])
ule_where = ule_hist;
memcpy(ule_where, h->ts, TS_SZ);
@@ -659,7 +659,7 @@ static void dvb_net_ule_check_crc(struct dvb_net_ule_handle *h,
h->ts_remain > 2 ?
*(unsigned short *)h->from_where : 0);
- #ifdef DVB_ULE_DEBUG
+ #ifdef CONFIG_DVB_ULE_DEBUG
hexdump(iov[0].iov_base, iov[0].iov_len);
hexdump(iov[1].iov_base, iov[1].iov_len);
hexdump(iov[2].iov_base, iov[2].iov_len);
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 5a764cec8..f81d1f31a 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -107,7 +107,7 @@ obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o
obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
-obj-$(CONFIG_REGULATOR_MT6315) += mt6316-regulator.o
+obj-$(CONFIG_REGULATOR_MT6316) += mt6316-regulator.o
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6331) += mt6331-regulator.o
obj-$(CONFIG_REGULATOR_MT6332) += mt6332-regulator.o
--
2.43.0
next reply other threads:[~2026-09-05 0:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-05 0:16 Breno Rodrigues Alves [this message]
2026-09-05 0:28 ` [PATCH v4] Kconfig: fix typos in core makefiles/code and purge remaining ghosts (v4) sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260905001631.108652-1-breno3011alves@gmail.com \
--to=breno3011alves@gmail.com \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=linux-usb@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox