From: sashiko-bot@kernel.org
To: "Jose Ignacio Tornos Martinez" <jtornosm@redhat.com>
Cc: linux-pci@vger.kernel.org
Subject: Re: [PATCH v15 1/2] PCI: Add device-specific reset for Qualcomm SDX62/SDX65 modems
Date: Mon, 05 Oct 2026 11:07:41 +0000 [thread overview]
Message-ID: <20261005110741.D53A31F00893@smtp.kernel.org> (raw)
In-Reply-To: <20261005105436.83962-2-jtornosm@redhat.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] pci: restoring PCI_COMMAND enables memory decode with 0-initialized BARs
--
commit 760a69f51b8830cd55e316a784f0c3e65a321b72
Author: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
PCI: Add device-specific reset for Qualcomm SDX62/SDX65 modems
This commit introduces a device-specific hardware reset mechanism for Qualcomm
SDX62/SDX65 modems. It uses a sequence of writes to BAR0 MHI SoC reset
registers to properly initialize the devices for VFIO passthrough.
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index de9bbccda21fd..e72af7d2c7755 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
[ ... ]
> @@ -4230,6 +4230,45 @@ static int reset_hinic_vf_dev(struct pci_dev *pdev, bool probe)
[ ... ]
> +static int reset_qualcomm_modem(struct pci_dev *pdev, bool probe)
> +{
> + void __iomem *bar;
> + u16 cmd;
> +
> + if (probe)
> + return 0;
> +
> + if (pdev->current_state != PCI_D0)
> + return -EINVAL;
> +
> + pci_read_config_word(pdev, PCI_COMMAND, &cmd);
> + pci_write_config_word(pdev, PCI_COMMAND, cmd | PCI_COMMAND_MEMORY);
> +
> + bar = pci_iomap(pdev, 0, 0);
> + if (!bar) {
> + pci_write_config_word(pdev, PCI_COMMAND, cmd);
> + return -ENODEV;
> + }
> +
> + iowrite32(MHI_SOC_RESET_REQ, bar + MHI_SOC_RESET_REQ_OFFSET);
> + ioread32(bar + MHI_SOC_RESET_REQ_OFFSET);
> +
> + /* Be sure device reset has been executed */
> + msleep(2000);
> +
> + pci_iounmap(pdev, bar);
> + pci_write_config_word(pdev, PCI_COMMAND, cmd);
[Severity: High]
Could restoring PCI_COMMAND here cause a system address conflict?
If the saved cmd originally had the PCI_COMMAND_MEMORY bit set (for example,
when called from a path like Xen PCIBACK's pcistub_reset_device_state),
writing it back immediately enables memory decode. Because the hardware reset
has just occurred, the device's BARs will have been cleared to 0.
Does this create a risk of silent memory corruption by allowing the device to
claim physical address 0 before the PCI core has a chance to restore the BARs
properly in pci_restore_config_space()?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261005105436.83962-1-jtornosm@redhat.com?part=1
next prev parent reply other threads:[~2026-10-05 11:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 10:54 [PATCH v15 0/2] PCI: Add device-specific reset for Qualcomm devices Jose Ignacio Tornos Martinez
2026-10-05 10:54 ` [PATCH v15 1/2] PCI: Add device-specific reset for Qualcomm SDX62/SDX65 modems Jose Ignacio Tornos Martinez
2026-10-05 11:07 ` sashiko-bot [this message]
2026-10-05 12:00 ` Jose Ignacio Tornos Martinez
2026-10-05 10:54 ` [PATCH v15 2/2] PCI: Add device-specific reset for Qualcomm WCN6855/WCN7850 WLAN Jose Ignacio Tornos Martinez
2026-10-05 11:05 ` sashiko-bot
2026-10-05 11:59 ` Jose Ignacio Tornos Martinez
2026-10-05 16:41 ` [PATCH v15 0/2] PCI: Add device-specific reset for Qualcomm devices Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005110741.D53A31F00893@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=jtornosm@redhat.com \
--cc=linux-pci@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox