Re: [PATCH v4 3/6] PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()

[Philipp Zabel <p.zabel@pengutronix.de>]

On Mo, 2024-11-18 at 09:04 +0100, Lorenzo Bianconi wrote:
> In order to make the code more readable, the reset_control_bulk_assert()
> for PHY reset lines is moved to make it pair with
> reset_control_bulk_deassert() in mtk_pcie_power_up() and
> mtk_pcie_en7581_power_up(). The same change is done for
> reset_control_assert() used to assert MAC reset line.
> 
> Introduce PCIE_MTK_RESET_TIME_US macro for the time needed to
> complete PCIe reset on MediaTek controller.
> 
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
>  drivers/pci/controller/pcie-mediatek-gen3.c | 27 +++++++++++++++++++--------
>  1 file changed, 19 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> index 3cfcb45d31508142d28d338ff213f70de9b4e608..2b80edd4462ad4e9f2a5d192db7f99307113eb8a 100644
> --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> @@ -125,6 +125,8 @@
>  
>  #define MAX_NUM_PHY_RESETS		3
>  
> +#define PCIE_MTK_RESET_TIME_US		10
> +
>  /* Time in ms needed to complete PCIe reset on EN7581 SoC */
>  #define PCIE_EN7581_RESET_TIME_MS	100
>  
> @@ -912,6 +914,14 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
>  	int err;
>  	u32 val;
>  
> +	/*
> +	 * The controller may have been left out of reset by the bootloader
> +	 * so make sure that we get a clean start by asserting resets here.
> +	 */
> +	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
> +				  pcie->phy_resets);
> +	reset_control_assert(pcie->mac_reset);
> +
>  	/*
>  	 * Wait for the time needed to complete the bulk assert in
>  	 * mtk_pcie_setup for EN7581 SoC.

This comment is not correct anymore.


regards
Philipp