From: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
To: Bjorn Helgaas <helgaas@kernel.org>, linux-pci@vger.kernel.org
Cc: "Jon Pan-Doh" <pandoh@google.com>,
"Karolina Stolarek" <karolina.stolarek@oracle.com>,
"Weinan Liu" <wnliu@google.com>,
"Martin Petersen" <martin.petersen@oracle.com>,
"Ben Fuller" <ben.fuller@oracle.com>,
"Drew Walton" <drewwalton@microsoft.com>,
"Anil Agrawal" <anilagrawal@meta.com>,
"Tony Luck" <tony.luck@intel.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Lukas Wunner" <lukas@wunner.de>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>,
"Sargun Dhillon" <sargun@meta.com>,
"Paul E . McKenney" <paulmck@kernel.org>,
"Mahesh J Salgaonkar" <mahesh@linux.ibm.com>,
"Oliver O'Halloran" <oohall@gmail.com>,
"Kai-Heng Feng" <kaihengf@nvidia.com>,
"Keith Busch" <kbusch@kernel.org>,
"Robert Richter" <rrichter@amd.com>,
"Terry Bowman" <terry.bowman@amd.com>,
"Shiju Jose" <shiju.jose@huawei.com>,
"Dave Jiang" <dave.jiang@intel.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
"Bjorn Helgaas" <bhelgaas@google.com>
Subject: Re: [PATCH v8 13/20] PCI/ERR: Add printk level to pcie_print_tlp_log()
Date: Thu, 22 May 2025 16:44:43 -0700 [thread overview]
Message-ID: <2d99e03b-e899-41dd-91f8-d36673d23392@linux.intel.com> (raw)
In-Reply-To: <20250522232339.1525671-14-helgaas@kernel.org>
On 5/22/25 4:21 PM, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
>
> aer_print_error() produces output at a printk level (KERN_ERR/KERN_WARNING/
> etc) that depends on the kind of error, and it calls pcie_print_tlp_log(),
> which previously always produced output at KERN_ERR.
>
> Add a "level" parameter so aer_print_error() can control the level of the
> pcie_print_tlp_log() output to match.
>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> drivers/pci/pci.h | 3 ++-
> drivers/pci/pcie/aer.c | 5 +++--
> drivers/pci/pcie/dpc.c | 2 +-
> drivers/pci/pcie/tlp.c | 6 ++++--
> 4 files changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 705f9ef58acc..1a9bfc708757 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -613,7 +613,8 @@ int pcie_read_tlp_log(struct pci_dev *dev, int where, int where2,
> struct pcie_tlp_log *log);
> unsigned int aer_tlp_log_len(struct pci_dev *dev, u32 aercc);
> void pcie_print_tlp_log(const struct pci_dev *dev,
> - const struct pcie_tlp_log *log, const char *pfx);
> + const struct pcie_tlp_log *log, const char *level,
> + const char *pfx);
> #endif /* CONFIG_PCIEAER */
>
> #ifdef CONFIG_PCIEPORTBUS
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index f80c78846a14..f0936759ba8b 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -734,7 +734,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
> __aer_print_error(dev, info);
>
> if (info->tlp_header_valid)
> - pcie_print_tlp_log(dev, &info->tlp, dev_fmt(" "));
> + pcie_print_tlp_log(dev, &info->tlp, level, dev_fmt(" "));
>
> out:
> if (info->id && info->error_dev_num > 1 && info->id == id)
> @@ -797,7 +797,8 @@ void pci_print_aer(struct pci_dev *dev, int aer_severity,
> aer->uncor_severity);
>
> if (tlp_header_valid)
> - pcie_print_tlp_log(dev, &aer->header_log, dev_fmt(" "));
> + pcie_print_tlp_log(dev, &aer->header_log, info.level,
> + dev_fmt(" "));
> }
> EXPORT_SYMBOL_NS_GPL(pci_print_aer, "CXL");
>
> diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
> index 6c98fabdba57..7ae1590ea1da 100644
> --- a/drivers/pci/pcie/dpc.c
> +++ b/drivers/pci/pcie/dpc.c
> @@ -222,7 +222,7 @@ static void dpc_process_rp_pio_error(struct pci_dev *pdev)
> dpc_tlp_log_len(pdev),
> pdev->subordinate->flit_mode,
> &tlp_log);
> - pcie_print_tlp_log(pdev, &tlp_log, dev_fmt(""));
> + pcie_print_tlp_log(pdev, &tlp_log, KERN_ERR, dev_fmt(""));
>
> if (pdev->dpc_rp_log_size < PCIE_STD_NUM_TLP_HEADERLOG + 1)
> goto clear_status;
> diff --git a/drivers/pci/pcie/tlp.c b/drivers/pci/pcie/tlp.c
> index 890d5391d7f5..71f8fc9ea2ed 100644
> --- a/drivers/pci/pcie/tlp.c
> +++ b/drivers/pci/pcie/tlp.c
> @@ -98,12 +98,14 @@ int pcie_read_tlp_log(struct pci_dev *dev, int where, int where2,
> * pcie_print_tlp_log - Print TLP Header / Prefix Log contents
> * @dev: PCIe device
> * @log: TLP Log structure
> + * @level: Printk log level
> * @pfx: String prefix
> *
> * Prints TLP Header and Prefix Log information held by @log.
> */
> void pcie_print_tlp_log(const struct pci_dev *dev,
> - const struct pcie_tlp_log *log, const char *pfx)
> + const struct pcie_tlp_log *log, const char *level,
> + const char *pfx)
> {
> /* EE_PREFIX_STR fits the extended DW space needed for the Flit mode */
> char buf[11 * PCIE_STD_MAX_TLP_HEADERLOG + 1];
> @@ -130,6 +132,6 @@ void pcie_print_tlp_log(const struct pci_dev *dev,
> }
> }
>
> - pci_err(dev, "%sTLP Header%s: %s\n", pfx,
> + dev_printk(level, &dev->dev, "%sTLP Header%s: %s\n", pfx,
> log->flit ? " (Flit)" : "", buf);
> }
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
next prev parent reply other threads:[~2025-05-22 23:44 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-22 23:21 [PATCH v8 00/20] Rate limit AER logs Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 01/20] PCI/DPC: Initialize aer_err_info before using it Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 02/20] PCI/DPC: Log Error Source ID only when valid Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 03/20] PCI/AER: Factor COR/UNCOR error handling out from aer_isr_one_error() Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 04/20] PCI/AER: Consolidate Error Source ID logging in aer_isr_one_error_type() Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 05/20] PCI/AER: Extract bus/dev/fn in aer_print_port_info() with PCI_BUS_NUM(), etc Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 06/20] PCI/AER: Rename aer_print_port_info() to aer_print_source() Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 07/20] PCI/AER: Move aer_print_source() earlier in file Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 08/20] PCI/AER: Initialize aer_err_info before using it Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 09/20] PCI/AER: Simplify pci_print_aer() Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 10/20] PCI/AER: Update statistics before ratelimiting Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 11/20] PCI/AER: Trace error event " Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 12/20] PCI/AER: Check log level once and remember it Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 13/20] PCI/ERR: Add printk level to pcie_print_tlp_log() Bjorn Helgaas
2025-05-22 23:44 ` Sathyanarayanan Kuppuswamy [this message]
2025-05-23 9:56 ` Ilpo Järvinen
2025-05-28 6:38 ` Lukas Wunner
2025-05-28 10:00 ` Ilpo Järvinen
2025-05-22 23:21 ` [PATCH v8 14/20] PCI/AER: Reduce pci_print_aer() correctable error level to KERN_WARNING Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 15/20] PCI/AER: Rename struct aer_stats to aer_info Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 16/20] PCI/AER: Convert aer_get_device_error_info(), aer_print_error() to index Bjorn Helgaas
2025-05-22 23:58 ` Sathyanarayanan Kuppuswamy
2025-05-23 11:13 ` Ilpo Järvinen
2025-05-23 16:12 ` Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 17/20] PCI/AER: Simplify add_error_device() Bjorn Helgaas
2025-05-22 23:57 ` Sathyanarayanan Kuppuswamy
2025-05-23 11:14 ` Ilpo Järvinen
2025-05-22 23:21 ` [PATCH v8 18/20] PCI/AER: Ratelimit correctable and non-fatal error logging Bjorn Helgaas
2025-05-22 23:56 ` Sathyanarayanan Kuppuswamy
2025-05-23 16:06 ` Bjorn Helgaas
2025-08-01 13:16 ` Breno Leitao
2025-08-01 13:35 ` Breno Leitao
2025-05-22 23:21 ` [PATCH v8 19/20] PCI/AER: Add ratelimits to PCI AER Documentation Bjorn Helgaas
2025-05-22 23:21 ` [PATCH v8 20/20] PCI/AER: Add sysfs attributes for log ratelimits Bjorn Helgaas
2025-05-22 23:50 ` Sathyanarayanan Kuppuswamy
2025-05-23 16:21 ` [PATCH v8 00/20] Rate limit AER logs Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2d99e03b-e899-41dd-91f8-d36673d23392@linux.intel.com \
--to=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=anilagrawal@meta.com \
--cc=ben.fuller@oracle.com \
--cc=bhelgaas@google.com \
--cc=dave.jiang@intel.com \
--cc=drewwalton@microsoft.com \
--cc=helgaas@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=kaihengf@nvidia.com \
--cc=karolina.stolarek@oracle.com \
--cc=kbusch@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lukas@wunner.de \
--cc=mahesh@linux.ibm.com \
--cc=martin.petersen@oracle.com \
--cc=oohall@gmail.com \
--cc=pandoh@google.com \
--cc=paulmck@kernel.org \
--cc=rrichter@amd.com \
--cc=sargun@meta.com \
--cc=shiju.jose@huawei.com \
--cc=terry.bowman@amd.com \
--cc=tony.luck@intel.com \
--cc=wnliu@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).