From: Jiantao Zhang <water.zhangjiantao@huawei.com>
To: <robh@kernel.org>, Bjorn Helgaas <helgaas@kernel.org>,
"jingoohan1@gmail.com" <jingoohan1@gmail.com>,
"gustavo.pimentel@synopsys.com" <gustavo.pimentel@synopsys.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"kw@linux.com" <kw@linux.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"zhangjianrong (E)" <zhangjianrong5@huawei.com>
Cc: caiyadong <caiyadong@huawei.com>,
"xuetao (kirin)" <xuetao09@huawei.com>,
xuhaiyang <xuhaiyang5@hisilicon.com>, <songxiaowei@hisilicon.com>,
<guhengsheng@hisilicon.com>
Subject: [PATCH v2] PCI: dwc: Fix setting error return on MSI DMA mapping failure
Date: Wed, 9 Mar 2022 20:01:04 +0800 [thread overview]
Message-ID: <30170911-0e2f-98ce-9266-70465b9073e5@huawei.com> (raw)
In-Reply-To: <CAL_JsqJNMGobo1iaBjqSQJXNy9arXGU+et20dMueCK44seGnQw@mail.gmail.com>
When dma_mapping_error() returns error because of no enough memory,
but dw_pcie_host_init() returns success, which will mislead the callers.
Fixes: 07940c369a6b ("PCI: dwc: Fix MSI page leakage in suspend/resume")
Signed-off-by: Jianrong Zhang <zhangjianrong5@huawei.com>
Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
---
drivers/pci/controller/dwc/pcie-designware-host.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index f4755f3a03be..9dcb51728dd1 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -390,7 +390,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
sizeof(pp->msi_msg),
DMA_FROM_DEVICE,
DMA_ATTR_SKIP_CPU_SYNC);
- if (dma_mapping_error(pci->dev, pp->msi_data)) {
+ ret = dma_mapping_error(pci->dev, pp->msi_data);
+ if (ret) {
dev_err(pci->dev, "Failed to map MSI data\n");
pp->msi_data = 0;
goto err_free_msi;
--
2.17.1
Jiantao Zhang
On Tue, Mar 8, 2022 at 9:45 AM Zhangjiantao(Kirin,Nanjing)
<water.zhangjiantao@huawei.com> wrote:
> When dma_mapping_error() returns error because of no enough memory available, dw_pcie_host_init() will return success, which will mislead the callers.
Again, wrap long lines. And please reword the subject as I previously
suggested.
It should be 'PATCH v2', not 'PATCH2' in the subject. 'git send-email
-v2' does that for you.
> Fixes: 07940c369a6b ("PCI: dwc: Fix MSI page leakage in suspend/resume")
>
Drop the blank line here.
> Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
As you are sending the patch, your S-o-b goes last. And the author
name still doesn't match here: 'Jiantao Zhang' vs.
'Zhangjiantao(Kirin,Nanjing)'
> Signed-off-by: Jianrong Zhang <zhangjianrong5@huawei.com>
> ---
> drivers/pci/controller/dwc/pcie-designware-host.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c
> b/drivers/pci/controller/dwc/pcie-designware-host.c
> index f4755f3a03be..9dcb51728dd1 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -390,7 +390,8 @@ int dw_pcie_host_init(struct pcie_port *pp)
> sizeof(pp->msi_msg),
> DMA_FROM_DEVICE,
> DMA_ATTR_SKIP_CPU_SYNC);
> - if (dma_mapping_error(pci->dev, pp->msi_data)) {
> + ret = dma_mapping_error(pci->dev, pp->msi_data);
> + if (ret) {
> dev_err(pci->dev, "Failed to map MSI data\n");
> pp->msi_data = 0;
> goto err_free_msi;
> --
> 2.17.1
>
> Jiantao Zhang
>
> On 2022/3/5 5:39, Bjorn Helgaas wrote:
>> On Fri, Mar 04, 2022 at 12:06:10PM +0000, Zhangjiantao(Kirin,Nanjing) wrote:
All this should not be in new versions of patches.
>>> When dma_mapping_error returns error because of no enough memory available, dw_pcie_host_init will return success, which will mislead the callers.
>> Wrap to fit in 75 columns, add "()" after function names.
>>> Signed-off-by: zhangjianrong <zhangjianrong5@huawei.com>
>>> Signed-off-by: zhangjiantao <water.zhangjiantao@huawei.com>
>>>
>>> ---
>>> drivers/pci/controller/dwc/pcie-designware-host.c | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c
>>> b/drivers/pci/controller/dwc/pcie-designware-host.c
>>> index f4755f3a03be..ac691d733848 100644
>>> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
>>> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
>>> @@ -393,6 +393,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
>>> if (dma_mapping_error(pci->dev, pp->msi_data)) {
>>> dev_err(pci->dev, "Failed to map MSI data\n");
>>> pp->msi_data = 0;
>>> + ret = -1;
>> We should save the return value from dma_mapping_error() and return
>> *that*, not -1.
>>
>> Whitespace error (indent with tabs, same as the surrounding code).
>>
>>> goto err_free_msi;
>>> }
>>> }
>>> --
>>> 2.17.1
>>>
>> .
next prev parent reply other threads:[~2022-03-09 12:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-08 15:45 [PATCH2] PCI: dwc: solve returning success but actually failed Zhangjiantao(Kirin,Nanjing)
2022-03-08 17:03 ` Rob Herring
2022-03-09 12:01 ` Jiantao Zhang [this message]
2022-03-24 21:04 ` [PATCH v2] PCI: dwc: Fix setting error return on MSI DMA mapping failure Rob Herring
2022-04-08 14:43 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=30170911-0e2f-98ce-9266-70465b9073e5@huawei.com \
--to=water.zhangjiantao@huawei.com \
--cc=caiyadong@huawei.com \
--cc=guhengsheng@hisilicon.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=helgaas@kernel.org \
--cc=jingoohan1@gmail.com \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh@kernel.org \
--cc=songxiaowei@hisilicon.com \
--cc=xuetao09@huawei.com \
--cc=xuhaiyang5@hisilicon.com \
--cc=zhangjianrong5@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox