[PATCH V8 3/9] phy: SPEAr1310/40-miphy: Add binding information

[Mohit Kumar <mohit.kumar@st.com>]

From: Pratyush Anand <pratyush.anand@st.com>

SPEAr1310/40 uses miphy for PCIe, SATA. This patch adds documentation
for the binding on the top of generic phy bindings.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mohit Kumar <mohit.kumar@st.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: spear-devel@list.st.com
Cc: devicetree@vger.kernel.org
---
 .../devicetree/bindings/phy/st-spear1310-miphy.txt |   12 ++++++++++++
 .../devicetree/bindings/phy/st-spear1340-miphy.txt |   11 +++++++++++
 2 files changed, 23 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt

diff --git a/Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt
new file mode 100644
index 0000000..b9b281a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/st-spear1310-miphy.txt
@@ -0,0 +1,12 @@
+ST SPEAr1310-miphy DT detail
+===================================
+
+SPEAr1310-miphy is a phy controller supporting PCIe and SATA.
+
+Required properties:
+- compatible : should be "st,spear1310-miphy"
+- reg : offset and length of the PHY register set.
+- misc: phandle for the syscon node to access misc registers
+- phy-id: Instance id of the phy.
+- #phy-cells : from the generic PHY bindings, must be 1.
+	- cell[1]: 0 if phy used for SATA, 1 for PCIe.
diff --git a/Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt
new file mode 100644
index 0000000..7eb5335
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/st-spear1340-miphy.txt
@@ -0,0 +1,11 @@
+ST SPEAr1340-miphy DT detail
+===================================
+
+SPEAr1340-miphy is a phy controller supporting PCIe and SATA.
+
+Required properties:
+- compatible : should be "st,spear1340-miphy"
+- reg : offset and length of the PHY register set.
+- misc: phandle for the syscon node to access misc registers
+- #phy-cells : from the generic PHY bindings, must be 1.
+	- cell[1]: 0 if phy used for SATA, 1 for PCIe.
-- 
1.7.0.1