Re: [PATCH v7 2/3] dwc: PCI: intel: PCIe RC controller driver

[Dilip Kota <eswara.kota@linux.intel.com>]

On 11/19/2019 10:33 AM, Jingoo Han wrote:
> On 11/18/19, 8:26 PM, Dilip Kota wrote:
>> On 11/19/2019 12:40 AM, Jingoo Han wrote:
>>> On 11/18/19, 2:58 AM, Dilip Kota wrote:
>>>
>>>> On 11/16/2019 4:40 AM, Jingoo Han wrote:
>>>>> On 11/14/19, 9:31 PM, Dilip Kota wrote:
>>>>>
>>>>>> Add support to PCIe RC controller on Intel Gateway SoCs.
>>>>>> PCIe controller is based of Synopsys DesignWare PCIe core.
>>>>>>
>>>>>> Intel PCIe driver requires Upconfigure support, Fast Training
>>>>>> Sequence and link speed configurations. So adding the respective
>>>>>> helper functions in the PCIe DesignWare framework.
>>>>>> It also programs hardware autonomous speed during speed
>>>>>> configuration so defining it in pci_regs.h.
>>>>>>
>>>>>> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
>>>>>> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
>>>>>> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>>>>>> ---
>>>>> [.....]
>>>>>
>>>>>>     drivers/pci/controller/dwc/Kconfig           |  10 +
>>>>>>     drivers/pci/controller/dwc/Makefile          |   1 +
>>>>>>     drivers/pci/controller/dwc/pcie-designware.c |  57 +++
>>>>>>     drivers/pci/controller/dwc/pcie-designware.h |  12 +
>>>>>>     drivers/pci/controller/dwc/pcie-intel-gw.c   | 542 +++++++++++++++++++++++++++
>>>>>>     include/uapi/linux/pci_regs.h                |   1 +
>>>>>>     6 files changed, 623 insertions(+)
>>>>>>     create mode 100644 drivers/pci/controller/dwc/pcie-intel-gw.c
>>>>>>
>>>>>> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
>>>>>> index 0ba988b5b5bc..fb6d474477df 100644
>>>>>> --- a/drivers/pci/controller/dwc/Kconfig
>>>>>> +++ b/drivers/pci/controller/dwc/Kconfig
>>>>>> @@ -82,6 +82,16 @@ config PCIE_DW_PLAT_EP
>>>>>>     	  order to enable device-specific features PCI_DW_PLAT_EP must be
>>>>>>     	  selected.
>>>>>>     
>>>>>> +config PCIE_INTEL_GW
>>>>>> +	bool "Intel Gateway PCIe host controller support"
>>>>>> +	depends on OF && (X86 || COMPILE_TEST)
>>>>>> +	select PCIE_DW_HOST
>>>>>> +	help
>>>>>> +	  Say 'Y' here to enable PCIe Host controller support on Intel
>>>>>> +	  Gateway SoCs.
>>>>>> +	  The PCIe controller uses the DesignWare core plus Intel-specific
>>>>>> +	  hardware wrappers.
>>>>>> +
>>>>> Please add this config alphabetical order!
>>>>> So, this config should be after 'config PCI_IMX6'.
>>>>> There is no reason to put this config at the first place.
>>>>>
>>>>>>     config PCI_EXYNOS
>>>>>>     	bool "Samsung Exynos PCIe controller"
>>>>>>     	depends on SOC_EXYNOS5440 || COMPILE_TEST
>>>>>> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
>>>>>> index b30336181d46..99db83cd2f35 100644
>>>>>> --- a/drivers/pci/controller/dwc/Makefile
>>>>>> +++ b/drivers/pci/controller/dwc/Makefile
>>>>>> @@ -3,6 +3,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o
>>>>>>     obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
>>>>>>     obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
>>>>>>     obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
>>>>>> +obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
>>>>> Ditto.
>>>> PCIE_INTEL_GW wouldnt come after PCI_IMX6, the complete Makefile and
>>>> Kconfig are not in order,( PCI_* and PCIE_* are not in any order). So i
>>>> just followed PCIE_DW and placed PCIE_INTEL_GW after PCIE_DW as I is
>>>> after D (and i see PCI_* immediately after the PCIE_DW*, so i placed
>>>> PCIE_INTEL_GW after PCIE_DW* and before PCI_*).
>>> Hey, although some of them are not in order, you don't have a right to do so.
>>> If some people do not follow the law, it does not mean that you can break the law.
>>> Anyway, if you don't follow an alphabetical order, my answer is NACK.
>>> Also, other people or I will send a patch to fix the order of other drivers.
>> I am not against following the order. I kept PCIE_INTEL_GW after
>> PCIE_DW* by checking the best possible order.
>> As per the alphabetical order, i see all CONFIG_PCIE_* comes first and
>> CONFIG_PCI_* follows. So, by following this, i placed PCIE_INTEL_GW
>> after PCIE_DW* (for the same reason PCIE_INTEL_GW cannot be placed after
>> PCI_IMX6).
>> Even after re-ordering the Kconfig and Makefile, still PCIE_INTEL_GW
>> comes after PCIE_DW_PLAT( and PCIE_HISI_STB).
> Are you kidding me?
>
> Most PCIE_* drivers are located after PCI_*. Look at PCIE_QCOM, PCIE_ARMADA_8K,
> PCIE_ARTPEC6, PCIE_KIRIN, PCIE_HISI_STB, PCIE_TEGRA194, PCIE_UNIPHIER, PCIE_AL.
Ok, So the understanding is PCIE_DW* will be at top as they are 
framework and then comes CONFIG_PCI_*, CONFIG_PCIE_*.
> Put PCIE_INTEL_GW between PCIE_ARTPEC6_EP and PCIE_KIRIN.

Ok. I will update in the next patch version.

Regards,
Dilip

>
>
>> Regards,
> Dilip
>
>>
>>> Regards,
>>> Dilip
>>> Best regards,
>>> Jingoo Han
>>>
>>>>     obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
>>>>     obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
>>>>     obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
>>>> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
>>>> index 820488dfeaed..479e250695a0 100644
>>> [.....]