Re: [PATCH v1 3/3] PCI: qcom: Add OPP suuport for speed based performance state of RPMH

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 15.08.2023 14:26, Krishna chaitanya chundru wrote:
> Before link training vote for the maximum performance state of RPMH
> and once the link is up, vote for the performance state based upon
> the link speed.
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++++++++++++++++++
>  1 file changed, 61 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 7a87a47..e29a986 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -22,6 +22,7 @@
>  #include <linux/of_device.h>
>  #include <linux/of_gpio.h>
>  #include <linux/pci.h>
> +#include <linux/pm_opp.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/platform_device.h>
>  #include <linux/phy/pcie.h>
> @@ -1357,6 +1358,51 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
>  	return 0;
>  }
>  
> +static void qcom_pcie_opp_update(struct qcom_pcie *pcie)
> +{
> +	struct dw_pcie *pci = pcie->pci;
> +	struct dev_pm_opp *opp;
> +	u32 offset, status;
> +	uint32_t freq;
> +	int speed;
> +	int ret = 0;
On top of Krzysztof's comments:

ret is effectively unused

[...]

> +	opp = dev_pm_opp_find_freq_exact(pci->dev, freq, true);
> +
> +	if (!IS_ERR(opp)) {
Unnecessary newline

Konrad