linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiang Liu <liuj97@gmail.com>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>, Len Brown <lenb@kernel.org>,
	Taku Izumi <izumi.taku@jp.fujitsu.com>,
	Jiang Liu <jiang.liu@huawei.com>, x86 <x86@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-acpi@vger.kernel.org, Dave Airlie <airlied@redhat.com>,
	Julia Lawall <julia@diku.dk>, Matthew Garrett <mjg@redhat.com>
Subject: Re: [PATCH 01/40] PCI: fix default vga ref_count
Date: Sun, 23 Sep 2012 23:25:53 +0800	[thread overview]
Message-ID: <505F2A01.7010109@gmail.com> (raw)
In-Reply-To: <1348080894-23412-2-git-send-email-yinghai@kernel.org>

On 09/20/2012 02:54 AM, Yinghai Lu wrote:
> when __ARCH_HAS_VGA_DEFAULT_DEVICE is not defined, aka EFIFB is not used,
> for static path, vga_default setting is through vga_arbiter_add_pci_device.
> and later x86 pci_fixup_video, will skip setting again.
> - subsys_initcall(vga_arb_device_init) come first to call vga_arbiter_add_pci_device. It will call pci_get_dev to hold one reference.
> 
> for hotplug add path, even vga_arbiter_add_pci_device is called via notifier,
> but it will check VGA_RSRC_LEGACY_MASK that is not set for hotplug path.
> So x86 pci_fixup_video will take over to call vga_set_default_device().
> It will not hold one refrence.
> 
> Later for hotplug remove path, vga_arbiter_del_pci_device that does not check
> VGA_RSRC_LEGACY_MASK will call put_device and it will cause ref_count to
> decrease extra. that will have that pci device get deleted early wrongly.
> 
> Need to make get/put balance for both cases.
> 
> -v2: According to Bjorn, update vga_set_default_device instead...
> 
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> Cc: x86@kernel.org
> Cc: Dave Airlie <airlied@redhat.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Julia Lawall <julia@diku.dk>
> Cc: Matthew Garrett <mjg@redhat.com>
> ---
>  drivers/gpu/vga/vgaarb.c |   14 +++++++++-----
>  1 files changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
> index b6852b7..0888951e 100644
> --- a/drivers/gpu/vga/vgaarb.c
> +++ b/drivers/gpu/vga/vgaarb.c
> @@ -141,6 +141,12 @@ EXPORT_SYMBOL_GPL(vga_default_device);
>  
>  void vga_set_default_device(struct pci_dev *pdev)
>  {
> +	if (vga_default)
> +		pci_dev_put(vga_default);
> +
> +	if (pdev)
> +		pdev = pci_dev_get(pdev);
> +
>  	vga_default = pdev;
>  }
Seems it could be simplified as
void vga_set_default_device(struct pci_dev *pdev)
{
	pci_dev_put(vga_default);
 	vga_default = pci_dev_get(pdev);
}
--Gerry

>  #endif
> @@ -577,7 +583,7 @@ static bool vga_arbiter_add_pci_device(struct pci_dev *pdev)
>  #ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE
>  	if (vga_default == NULL &&
>  	    ((vgadev->owns & VGA_RSRC_LEGACY_MASK) == VGA_RSRC_LEGACY_MASK))
> -		vga_default = pci_dev_get(pdev);
> +		vga_set_default_device(pdev);
>  #endif
>  
>  	vga_arbiter_check_bridge_sharing(vgadev);
> @@ -613,10 +619,8 @@ static bool vga_arbiter_del_pci_device(struct pci_dev *pdev)
>  	}
>  
>  #ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE
> -	if (vga_default == pdev) {
> -		pci_dev_put(vga_default);
> -		vga_default = NULL;
> -	}
> +	if (vga_default == pdev)
> +		vga_set_default_device(NULL);
>  #endif
>  
>  	if (vgadev->decodes & (VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM))
> 


  parent reply	other threads:[~2012-09-23 15:25 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-02 21:50 [PATCH part2 0/6] PCI, x86: pci root bus hotplug support - part2 Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 1/6] x86, PCI: Separate pcibios_allocate_bridge_resources() Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 2/6] x86, PCI: Separate pcibios_allocate_dev_resources() Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 3/6] x86, PCI: Let pcibios_allocate_bus_resources() take bus instead Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 4/6] x86, PCI: Separate rom resource claim out Yinghai Lu
2012-09-17 23:38   ` Bjorn Helgaas
2012-09-18  3:18     ` Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 5/6] PCI, x86: Add pcibios_fw_addr_done Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 6/6] PCI: Claim hw/fw allocated resources in hot add path Yinghai Lu
2012-09-18  0:12   ` Bjorn Helgaas
2012-09-18  4:44     ` Yinghai Lu
2012-09-18  5:36       ` Yinghai Lu
2012-09-19 18:54         ` [PATCH 00/40] PCI, ACPI, x86: pci root bus hotplug support Yinghai Lu
2012-09-19 18:54           ` [PATCH 01/40] PCI: fix default vga ref_count Yinghai Lu
2012-09-21 20:52             ` Bjorn Helgaas
2012-09-21 21:18               ` Yinghai Lu
2012-09-23 15:25             ` Jiang Liu [this message]
2012-09-19 18:54           ` [PATCH 02/40] PCI, x86: clear initial value for root info resources Yinghai Lu
2012-09-19 18:54           ` [PATCH 03/40] PCI, ia64: " Yinghai Lu
2012-09-19 18:54           ` [PATCH 04/40] PCI, acpiphp: Add is_hotplug_bridge detection Yinghai Lu
2012-09-19 18:54           ` [PATCH 05/40] PCI: Add root bus children dev's res to fail list Yinghai Lu
2012-09-19 18:54           ` [PATCH 06/40] PCI: Split out stop_bus_device and remove_bus_dev again Yinghai Lu
2012-09-19 18:54           ` [PATCH 07/40] x86, PCI: Separate pcibios_allocate_bridge_resources() Yinghai Lu
2012-09-19 18:54           ` [PATCH 08/40] x86, PCI: Separate pcibios_allocate_dev_resources() Yinghai Lu
2012-09-19 18:54           ` [PATCH 09/40] x86, PCI: Let pcibios_allocate_bus_resources() take bus instead Yinghai Lu
2012-09-19 18:54           ` [PATCH 10/40] x86, PCI: Separate rom resource claim out Yinghai Lu
2012-09-19 18:54           ` [PATCH 11/40] PCI, x86: Add pcibios_fw_addr_done Yinghai Lu
2012-09-19 18:54           ` [PATCH 12/40] PCI, x86: Remove __init for hw/fw allocated functions Yinghai Lu
2012-09-19 18:54           ` [PATCH 13/40] PCI: Claim hw/fw allocated resources in hot add path Yinghai Lu
2012-09-19 18:54           ` [PATCH 14/40] PCI: Separate out pci_assign_unassigned_bus_resources() Yinghai Lu
2012-09-19 18:54           ` [PATCH 15/40] PCI: Move back pci_rescan_bus() to probe.c Yinghai Lu
2012-09-19 18:54           ` [PATCH 16/40] PCI: pci_bus_size_bridges() should not size own bridge Yinghai Lu
2012-09-19 18:54           ` [PATCH 17/40] PCI: Use __pci_bus_size_bridges() directly in pci_assign_unassigned_bus_resources() Yinghai Lu
2012-09-19 18:54           ` [PATCH 18/40] PCI: Rescan bus using callback method too Yinghai Lu
2012-09-19 18:54           ` [PATCH 19/40] PCI, sysfs: Clean up rescan/remove with schedule_callback Yinghai Lu
2012-09-19 18:54           ` [PATCH 20/40] PCI: Fix a device reference count leakage issue in pci_dev_present() Yinghai Lu
2012-09-19 18:54           ` [PATCH 21/40] PCI: Add pci_stop_and_remove_root_bus() Yinghai Lu
2012-09-19 18:54           ` [PATCH 22/40] PCI, acpiphp: Separate out hot-add support of pci host bridge Yinghai Lu
2012-10-12 10:36             ` Tang Chen
2012-09-19 18:54           ` [PATCH 23/40] PCI, ACPI: Pass device instead of handle when config root bridge Yinghai Lu
2012-09-19 18:54           ` [PATCH 24/40] PCI, acpi: Update acpi_pci_driver add/remove interface Yinghai Lu
2012-09-19 18:54           ` [PATCH 25/40] PCI, ACPI: Make acpi_pci_root_remove remove pci root bus too Yinghai Lu
2012-09-19 18:54           ` [PATCH 26/40] PCI, ACPI: del root bus prt Yinghai Lu
2012-09-19 18:54           ` [PATCH 27/40] ACPI: acpi_bus_trim to support two steps Yinghai Lu
2012-09-19 18:54           ` [PATCH 28/40] PCI, ACPI: Add pci_root_hp hot removal notification support Yinghai Lu
2012-09-19 18:54           ` [PATCH 29/40] PCI, ACPI: Add alloc_acpi_hp_work() Yinghai Lu
2012-09-19 18:54           ` [PATCH 30/40] PCI, acpiphp: Use acpi_hp_work Yinghai Lu
2012-09-19 18:54           ` [PATCH 31/40] PCI, pci_root_hp: " Yinghai Lu
2012-09-19 18:54           ` [PATCH 32/40] PCI, ACPI: Make kacpi_hotplug_wq static Yinghai Lu
2012-09-19 18:54           ` [PATCH 33/40] ACPI, PCI: Use normal list for struct acpi_pci_driver Yinghai Lu
2012-09-19 18:54           ` [PATCH 34/40] ACPI, PCI: Notify acpi_pci_drivers when hot-plugging PCI root bridges Yinghai Lu
2012-09-19 18:54           ` [PATCH 35/40] ACPI, PCI: Protect global lists in drivers/acpi/pci_root.c Yinghai Lu
2012-09-19 18:54           ` [PATCH 36/40] PCI: Set dev_node early for pci_dev Yinghai Lu
2012-09-19 18:54           ` [PATCH 37/40] PCI, x86: Move pci_enable_bridges() down Yinghai Lu
2012-09-19 18:54           ` [PATCH 38/40] ACPI, PCI: Skip extra pci_enable_bridges for non hot-add root Yinghai Lu
2012-09-19 18:54           ` [PATCH 39/40] PCI, acpiphp: Don't ailout even no slots found yet Yinghai Lu
2012-09-19 18:54           ` [PATCH 40/40] ACPI: Enable SCI_EMULATE to manually simulate physical hotplug testing Yinghai Lu
2012-10-17  7:50           ` [PATCH 00/40] PCI, ACPI, x86: pci root bus hotplug support Yijing Wang
2012-10-17 16:19             ` Yinghai Lu
2012-10-18  0:51               ` Yijing Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=505F2A01.7010109@gmail.com \
    --to=liuj97@gmail.com \
    --cc=airlied@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=izumi.taku@jp.fujitsu.com \
    --cc=jiang.liu@huawei.com \
    --cc=julia@diku.dk \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mjg@redhat.com \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).