linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: dri-devel@lists.freedesktop.org, David Airlie <airlied@linux.ie>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	brking@linux.vnet.ibm.com, benh@au1.ibm.com,
	Betty Dall <betty.dall@hp.com>,
	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Subject: Re: drm: Added ppc64 root device getter
Date: Sat, 22 Dec 2012 17:00:25 -0200	[thread overview]
Message-ID: <50D60349.7080400@linux.vnet.ibm.com> (raw)
In-Reply-To: <CAErSpo6BfWGYH+=ygS6qWT-YFKPuywooVgLWm+g_eB2dMw3iKQ@mail.gmail.com>

On 12/13/2012 09:31 PM, Bjorn Helgaas wrote:
> [+cc Betty]
>
> On Thu, Dec 13, 2012 at 4:04 PM, Lucas Kannebley Tavares
> <lucaskt@linux.vnet.ibm.com>  wrote:
>> On architectures such as ppc64, there is no root bus device (it belongs
>> to the hypervisor). DRM attempted to get one, causing a null-pointer
>> dereference.
>
> In addition to ppc64, at least ia64 and parisc have the same situation
> of the PCI host bridge not appearing as a  PCI device itself.
>
>> Signed-off-by: Lucas Kannebley Tavares<lucaskt@linux.vnet.ibm.com>
>>
>> --
>> diff --git a/arch/powerpc/platforms/pseries/Makefile
>> b/arch/powerpc/platforms/pseries/Makefile
>> index 890622b..ddfdda8 100644
>> --- a/arch/powerpc/platforms/pseries/Makefile
>> +++ b/arch/powerpc/platforms/pseries/Makefile
>> @@ -1,6 +1,8 @@
>>   ccflags-$(CONFIG_PPC64)                        := -mno-minimal-toc
>>   ccflags-$(CONFIG_PPC_PSERIES_DEBUG)    += -DDEBUG
>>
>> +drm-y                  += drm_pci.o
>> +
>>   obj-y                  := lpar.o hvCall.o nvram.o reconfig.o \
>>                             setup.o iommu.o event_sources.o ras.o \
>>                             firmware.o power.o dlpar.o mobility.o
>> diff --git a/arch/powerpc/platforms/pseries/drm_pci.c
>> b/arch/powerpc/platforms/pseries/drm_pci.c
>> new file mode 100644
>> index 0000000..da6675e
>> --- /dev/null
>> +++ b/arch/powerpc/platforms/pseries/drm_pci.c
>> @@ -0,0 +1,24 @@
>> +/*
>> + * Copyright (C) 2012 Lucas Kannebley Tavares, IBM Corporation
>> + *
>> + * pSeries specific routines for DRM.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
>> + */
>> +
>> +inline struct pci_device *drm_get_parent_device(struct drm_device *dev) {
>> +       return (dev->pdev->bus->self == NULL) ? dev->pdev :
>> dev->pdev->bus->self;
>
> So for DRM devices on a root bus, the parent is the DRM device itself,
> while for DRM devices deeper in the hierarchy, the parent is the
> upstream P2P bridge?  That doesn't really make sense to me.  If the
> caller operates on the DRM device in some cases and on the bridge in
> other cases, it's going to need to know the difference, so hiding the
> difference in this wrapper seems counterproductive.
>
>> +}
>> +
>> diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
>> index eb37466..5a8a4f5 100644
>> --- a/drivers/gpu/drm/drm_pci.c
>> +++ b/drivers/gpu/drm/drm_pci.c
>> @@ -466,6 +466,10 @@ void drm_pci_exit(struct drm_driver *driver, struct
>> pci_driver *pdriver)
>>   }
>>   EXPORT_SYMBOL(drm_pci_exit);
>>
>> +inline __weak struct pci_device *drm_get_parent_device(struct drm_device
>> *dev) {
>> +       return dev->pdev->bus->self;
>> +}
>> +
>>   int drm_pcie_get_speed_cap_mask(struct drm_device *dev, u32 *mask)
>>   {
>>          struct pci_dev *root;
>> @@ -479,7 +483,7 @@ int drm_pcie_get_speed_cap_mask(struct drm_device *dev,
>> u32 *mask)
>>                  return -EINVAL;
>>
>>          // find PCI device for capabilities
>> -       root = dev->pdev->bus->self;
>> +       root = drm_get_parent_device(dev);
>>
>>          // some architectures might not have host bridges as PCI devices
>>          if (root == NULL)
>
> What tree does this apply to?  Upstream doesn't have the "if (root ==
> NULL)" check yet.  That check looks like the sort of thing you'd need
> to avoid the null pointer dereference.  So maybe adding that check and
> the associated code is enough to fix the problem, even without adding
> drm_get_parent_device().
>
> With the code in the tree, it looks like you'd dereference a null
> pointer in pci_pcie_cap(root), so I assume that's what you tripped
> over.
>
> I'm not really sure that code outside the PCI core should be looking
> at capabilities of upstream devices like this.  It seems like the sort
> of thing where the core might need to provide better interfaces.
>
> Bjorn
>

Ok Bjorn, thanks for the comments, indeed I had a dirty tree here and 
didn't realize it, sorry. Either way I'm then sending the "if (root == 
NULL)" patch as a reply to this. I'm sending it along with another 
independent patch (they are NOT a series) that changes 
pci_read_config_dword calls to pci_capability_read_dword ones on the drm 
driver. There were only a couple of those to start with.

-- 
Lucas Kannebley Tavares
Software Engineer
IBM Linux Technology Center


  reply	other threads:[~2012-12-22 19:00 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-13 23:04 drm: Added ppc64 root device getter Lucas Kannebley Tavares
2012-12-13 23:31 ` Bjorn Helgaas
2012-12-22 19:00   ` Lucas Kannebley Tavares [this message]
2012-12-22 19:01     ` [PATCH] drm: fixed access to PCI host bridges Lucas Kannebley Tavares
2012-12-26 22:40       ` Bjorn Helgaas
2012-12-26 22:47         ` Dave Airlie
2012-12-22 19:07     ` [PATCH] drm: change pci_read_config_dword calls to pcie_capability_read_dword ones Lucas Kannebley Tavares

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50D60349.7080400@linux.vnet.ibm.com \
    --to=lucaskt@linux.vnet.ibm.com \
    --cc=airlied@linux.ie \
    --cc=benh@au1.ibm.com \
    --cc=betty.dall@hp.com \
    --cc=bhelgaas@google.com \
    --cc=brking@linux.vnet.ibm.com \
    --cc=cascardo@linux.vnet.ibm.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).