linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiang Liu <liuj97@gmail.com>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Jiang Liu <jiang.liu@huawei.com>,
	Yijing Wang <wangyijing@huawei.com>,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH v3 4/6] PCI/acpiphp: update ACPI hotplug slot information when PCI hotplug happens
Date: Thu, 10 Jan 2013 00:29:55 +0800	[thread overview]
Message-ID: <50ED9B03.3020606@gmail.com> (raw)
In-Reply-To: <5038693.7d3RCgbghD@vostro.rjw.lan>

On 01/09/2013 08:04 AM, Rafael J. Wysocki wrote:
> On Wednesday, January 09, 2013 12:52:23 AM Jiang Liu wrote:
>> Currently the acpiphp driver fails to update hotplug slot information under
>> several conditions, such as:
>> 1) The bridge device is removed through /sys/bus/pci/devices/.../remove
>> 2) The bridge device is added/removed by PCI hotplug driver other than the
>>    acpiphp driver itself. For example, if an IO expansion box with ACPI
>>    hotplug slots available is hot-added by the pciehp driver, all ACPI
>>    hotplug slots won't be discovered by the acpiphp driver.
>>
>> So hook the BUS_NOTIFY_ADD_DEVICE/BUS_NOTIFY_DEL_DEVICE events to
>> update ACPI hotplug slot information when PCI hotplug event happens.
>>
>> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  drivers/pci/hotplug/acpiphp_glue.c |   62 ++++++++++++++++++++++++++++++++++--
>>  1 file changed, 60 insertions(+), 2 deletions(-)
>>
snip
>> +static struct notifier_block acpi_pci_hp_notifier = {
>> +	.notifier_call = &acpi_pci_hp_notify_fn,
>> +};
>> +
>>  static struct acpi_pci_driver acpi_pci_hp_driver = {
>>  	.add =		add_bridge,
>>  	.remove =	remove_bridge,
>> @@ -1448,6 +1503,8 @@ int __init acpiphp_glue_init(void)
>>  	else
>>  		acpi_pci_register_driver(&acpi_pci_hp_driver);
>>  
>> +	bus_register_notifier(&pci_bus_type, &acpi_pci_hp_notifier);
> 
> Your previous patch adds a PCI bus notifier for a similar thing.  Why are
> you adding another one here?
Hi Rafael,
	The acpiphp driver could be built as a module, and this bus notifier
is used to setup/tear down ACPI based PCI hotplug controllers under a PCI bridge.
The previous patch is to add/remove PCI slots. The PCI slot and PCI hotplug
controller are related but different objects, so we use two notifiers to support
them all.
	Thanks!
	Gerry

> 
> 
>> +
>>  	return 0;
>>  }
>>  
>> @@ -1459,6 +1516,7 @@ int __init acpiphp_glue_init(void)
>>   */
>>  void  acpiphp_glue_exit(void)
>>  {
>> +	bus_unregister_notifier(&pci_bus_type, &acpi_pci_hp_notifier);
>>  	acpi_pci_unregister_driver(&acpi_pci_hp_driver);
>>  }
> 
> Thanks,
> Rafael
> 
> 


  reply	other threads:[~2013-01-09 16:30 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-25 14:29 [PATCH v3 1/7] PCI: make PCI device create/destroy logic symmetric Jiang Liu
2012-09-25 14:29 ` [PATCH v3 2/7] PCI: split registration of PCI bus devices into two stages Jiang Liu
2012-09-25 14:29 ` [PATCH v3 3/7] ACPI/pci_bind: correctly update binding relationship for PCI hotplug Jiang Liu
2013-01-08  0:05   ` Bjorn Helgaas
2013-01-08 16:52     ` [PATCH v3 0/6] Update PCI notification patchset to latest kernel version Jiang Liu
2013-01-08 18:30       ` Yinghai Lu
2013-01-09  9:11         ` Yijing Wang
2013-01-08 16:52     ` [PATCH v3 1/6] PCI: make PCI device create/destroy logic symmetric Jiang Liu
2013-01-08 16:52     ` [PATCH v3 2/6] PCI: split registration of PCI bus devices into two stages Jiang Liu
2013-01-08 23:29       ` Rafael J. Wysocki
2013-01-09 16:10         ` Jiang Liu
2013-01-08 16:52     ` [PATCH v3 3/6] ACPI/pci_slot: update PCI slot information when PCI hotplug event happens Jiang Liu
2013-01-09  0:01       ` Rafael J. Wysocki
2013-01-09 16:58         ` Jiang Liu
2013-01-09 20:19           ` Rafael J. Wysocki
2013-01-09 20:44             ` Bjorn Helgaas
2013-01-09 21:00               ` Rafael J. Wysocki
2013-01-10 21:24               ` Myron Stowe
2013-01-10 21:50                 ` Rafael J. Wysocki
2013-01-10 23:03                   ` Yinghai Lu
2013-01-10 23:39                     ` Rafael J. Wysocki
2013-01-10 23:40                       ` Yinghai Lu
2013-01-10 23:59                         ` Rafael J. Wysocki
2013-01-11 18:06                           ` Bjorn Helgaas
2013-01-11 20:46                             ` Rafael J. Wysocki
2013-01-11 11:07                       ` Martin Mokrejs
2013-01-11 12:07                         ` Rafael J. Wysocki
2013-01-08 16:52     ` [PATCH v3 4/6] PCI/acpiphp: update ACPI hotplug slot information when PCI hotplug happens Jiang Liu
2013-01-09  0:04       ` Rafael J. Wysocki
2013-01-09 16:29         ` Jiang Liu [this message]
2013-01-09 20:23           ` Rafael J. Wysocki
2013-01-13 15:13             ` Jiang Liu
2013-01-13 20:33               ` Rafael J. Wysocki
2013-01-08 16:52     ` [PATCH v3 5/6] PCI/acpiphp: serialize access to the bridge_list list Jiang Liu
2013-01-08 16:52     ` [PATCH v3 6/6] PCI/AER: update AER configuration when PCI hotplug event happens Jiang Liu
2012-09-25 14:29 ` [PATCH v3 4/7] ACPI/pci-bind: remove bind/unbind callbacks from acpi_device_ops Jiang Liu
2012-09-25 14:29 ` [PATCH v3 5/7] ACPI/pci_slot: update PCI slot information when PCI hotplug event happens Jiang Liu
2012-09-25 14:29 ` [PATCH v3 6/7] PCI/acpiphp: update ACPI hotplug slot information when PCI hotplug happens Jiang Liu
2012-09-25 14:29 ` [PATCH v3 7/7] PCI/acpiphp: serialize access to the bridge_list list Jiang Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50ED9B03.3020606@gmail.com \
    --to=liuj97@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=jiang.liu@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=rjw@sisk.pl \
    --cc=wangyijing@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).