From: Yijing Wang <wangyijing@huawei.com>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
"Rafael J. Wysocki" <rjw@sisk.pl>, Len Brown <lenb@kernel.org>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
Jiang Liu <jiang.liu@huawei.com>, <linux-pci@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-acpi@vger.kernel.org>
Subject: Re: [PATCH v8 01/22] PCI, acpiphp: Add is_hotplug_bridge detection
Date: Tue, 15 Jan 2013 14:45:56 +0800 [thread overview]
Message-ID: <50F4FB24.80200@huawei.com> (raw)
In-Reply-To: <1357944049-29620-2-git-send-email-yinghai@kernel.org>
On 2013/1/12 6:40, Yinghai Lu wrote:
> When system support hotplug bridge with children hotplug slots, we need
> to make sure that parent bridge get preallocated resource so later when
> device is plugged into children slot, those children devices will get
> resource allocated.
>
> We do not meet this problem, because for pcie hotplug card, when acpiphp
> is used, pci_scan_bridge will set that for us when detect hotplug bit in
> slot cap.
>
> Reported-and-tested-by: Jason Baron <jbaron@redhat.com>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> Acked-by: Jason Baron <jbaron@redhat.com>
> ---
> drivers/pci/hotplug/acpiphp_glue.c | 27 ++++++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
> index 91b5ad8..1e5c5df 100644
> --- a/drivers/pci/hotplug/acpiphp_glue.c
> +++ b/drivers/pci/hotplug/acpiphp_glue.c
> @@ -797,6 +797,29 @@ static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
> }
> }
>
> +static void check_hotplug_bridge(struct acpiphp_slot *slot, struct pci_dev *dev)
> +{
> + struct acpiphp_func *func;
> +
> + if (!dev->subordinate)
> + return;
> +
> + /* quirk, or pcie could set it already */
> + if (dev->is_hotplug_bridge)
> + return;
> +
> + if (PCI_SLOT(dev->devfn) != slot->device)
> + return;
> +
> + list_for_each_entry(func, &slot->funcs, sibling) {
> + if (PCI_FUNC(dev->devfn) == func->function) {
> + /* check if this bridge has ejectable slots */
> + if ((detect_ejectable_slots(func->handle) > 0))
> + dev->is_hotplug_bridge = 1;
> + break;
Hi Yinghai,
Need to put the "break" in parentheses of "if"? If the first func which device number == dev->devfn has't ejectable slot,
don't check the rest funcs whether have ejectable slots?
> + }
> + }
> +}
> /**
> * enable_device - enable, configure a slot
> * @slot: slot to be enabled
> @@ -831,8 +854,10 @@ static int __ref enable_device(struct acpiphp_slot *slot)
> if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
> dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
> max = pci_scan_bridge(bus, dev, max, pass);
> - if (pass && dev->subordinate)
> + if (pass && dev->subordinate) {
> + check_hotplug_bridge(slot, dev);
> pci_bus_size_bridges(dev->subordinate);
> + }
> }
> }
> }
>
--
Thanks!
Yijing
next prev parent reply other threads:[~2013-01-15 6:45 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-11 22:40 [PATCH v8 00/22] PCI, ACPI: pci root bus hotplug support / pci match_driver Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 01/22] PCI, acpiphp: Add is_hotplug_bridge detection Yinghai Lu
2013-01-12 21:35 ` Rafael J. Wysocki
2013-01-15 6:45 ` Yijing Wang [this message]
2013-01-15 7:05 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 02/22] PCI: Add root bus children dev's res to fail list Yinghai Lu
2013-01-12 21:37 ` Rafael J. Wysocki
2013-01-15 6:23 ` Yinghai Lu
2013-01-15 11:21 ` Rafael J. Wysocki
2013-01-15 15:44 ` Yinghai Lu
2013-01-15 21:52 ` Rafael J. Wysocki
2013-01-15 22:03 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 03/22] PCI: Set dev_node early for pci_dev Yinghai Lu
2013-01-12 21:38 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 04/22] PCI: Fix a device reference count leakage issue in pci_dev_present() Yinghai Lu
2013-01-12 21:39 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 05/22] PCI: make PCI device create/destroy logic symmetric Yinghai Lu
2013-01-12 21:40 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 06/22] PCI: split registration of PCI bus devices into two stages Yinghai Lu
2013-01-12 22:34 ` Rafael J. Wysocki
2013-01-13 15:25 ` Jiang Liu
2013-01-15 6:29 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 07/22] ACPI: Separate acpi_bus_trim to support two steps Yinghai Lu
2013-01-12 22:40 ` Rafael J. Wysocki
2013-01-15 6:31 ` Yinghai Lu
2013-01-15 11:22 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 08/22] PCI, acpiphp: Separate out hot-add support of pci host bridge Yinghai Lu
2013-01-12 23:18 ` Rafael J. Wysocki
2013-01-15 6:44 ` Yinghai Lu
2013-01-15 15:54 ` Yinghai Lu
2013-01-15 22:00 ` Rafael J. Wysocki
2013-01-15 22:04 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 09/22] PCI, ACPI: Add pci_root_hp hot removal notification support Yinghai Lu
2013-01-12 23:26 ` Rafael J. Wysocki
2013-01-15 6:45 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 10/22] ACPI: Introduce a new acpi handle to determine HID match Yinghai Lu
2013-01-12 23:27 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 11/22] PCI: correctly detect ACPI PCI host bridge objects Yinghai Lu
2013-01-12 23:34 ` Rafael J. Wysocki
2013-01-13 15:32 ` Jiang Liu
2013-01-11 22:40 ` [PATCH v8 12/22] PCI, ACPI: debug print for installation of acpi root bridge's notifier Yinghai Lu
2013-01-12 23:37 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 13/22] PCI, ACPI: remove acpi_root_bridge in pci_root_hp Yinghai Lu
2013-01-12 23:39 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 14/22] ACPI: update ej_event interface to take acpi_device Yinghai Lu
2013-01-12 23:40 ` Rafael J. Wysocki
2013-01-15 6:55 ` Yinghai Lu
2013-01-15 11:26 ` Rafael J. Wysocki
2013-01-15 23:43 ` Yinghai Lu
2013-01-15 23:55 ` Rafael J. Wysocki
2013-01-16 0:22 ` Rafael J. Wysocki
2013-01-16 0:36 ` Yinghai Lu
2013-01-16 14:05 ` Rafael J. Wysocki
2013-01-16 19:37 ` Yinghai Lu
2013-01-16 21:48 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 15/22] ACPI, PCI: Simplify handle_root_bridge_removal() Yinghai Lu
2013-01-12 23:42 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 16/22] PCI, acpiphp: Don't bailout even no slots found yet Yinghai Lu
2013-01-12 23:43 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 17/22] PCI, ACPI: Add alloc_acpi_hp_work() Yinghai Lu
2013-01-12 23:45 ` Rafael J. Wysocki
2013-01-15 6:59 ` Yinghai Lu
2013-01-15 11:27 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 18/22] PCI, acpiphp: Use acpi_hp_work Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 19/22] PCI, pci_root_hp: " Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 20/22] PCI, ACPI: Make kacpi_hotplug_wq static Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 21/22] PCI: add match_driver in struct pci_dev Yinghai Lu
2013-01-12 23:49 ` Rafael J. Wysocki
2013-01-13 15:40 ` Jiang Liu
2013-01-13 20:01 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 22/22] PCI: move device_add out of pci_bus_add_device() Yinghai Lu
2013-01-12 23:54 ` Rafael J. Wysocki
2013-01-15 7:10 ` Yinghai Lu
2013-01-15 11:19 ` Rafael J. Wysocki
2013-01-15 15:45 ` Yinghai Lu
2013-01-16 2:29 ` Yijing Wang
2013-01-16 2:41 ` Yinghai Lu
2013-01-12 21:35 ` [PATCH v8 00/22] PCI, ACPI: pci root bus hotplug support / pci match_driver Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50F4FB24.80200@huawei.com \
--to=wangyijing@huawei.com \
--cc=bhelgaas@google.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).