From: Don Dutile <ddutile@redhat.com>
To: Alex Williamson <alex.williamson@redhat.com>
Cc: bhelgaas@google.com, linux-pci@vger.kernel.org,
indou.takao@jp.fujitsu.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 5/9] pci: Split out pci_dev lock/unlock and save/restore
Date: Thu, 01 Aug 2013 16:59:14 -0400 [thread overview]
Message-ID: <51FACC22.10500@redhat.com> (raw)
In-Reply-To: <20130801165539.16145.79655.stgit@bling.home>
On 08/01/2013 12:55 PM, Alex Williamson wrote:
> Only cosmetic changes to existing paths.
>
> Signed-off-by: Alex Williamson<alex.williamson@redhat.com>
> ---
> drivers/pci/pci.c | 52 +++++++++++++++++++++++++++++++++++-----------------
> 1 file changed, 35 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index db90692..f6c757a 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3378,22 +3378,46 @@ done:
> return rc;
> }
>
> +static void pci_dev_lock(struct pci_dev *dev)
> +{
> + pci_cfg_access_lock(dev);
> + /* block PM suspend, driver probe, etc. */
> + device_lock(&dev->dev);
> +}
> +
> +static void pci_dev_unlock(struct pci_dev *dev)
> +{
> + device_unlock(&dev->dev);
> + pci_cfg_access_unlock(dev);
> +}
> +
> +static void pci_dev_save_and_disable(struct pci_dev *dev)
> +{
> + pci_save_state(dev);
> + /*
> + * both INTx and MSI are disabled after the Interrupt Disable bit
> + * is set and the Bus Master bit is cleared.
> + */
> + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
> +}
although the above is just a shuffling of the previous code,
does the comment need to point out that BARs are disabled by this write as well ?
> +
> +static void pci_dev_restore(struct pci_dev *dev)
> +{
> + pci_restore_state(dev);
> +}
> +
> static int pci_dev_reset(struct pci_dev *dev, int probe)
> {
> int rc;
>
> - if (!probe) {
> - pci_cfg_access_lock(dev);
> - /* block PM suspend, driver probe, etc. */
> - device_lock(&dev->dev);
> - }
> + if (!probe)
> + pci_dev_lock(dev);
>
> rc = __pci_dev_reset(dev, probe);
>
> - if (!probe) {
> - device_unlock(&dev->dev);
> - pci_cfg_access_unlock(dev);
> - }
> + if (!probe)
> + pci_dev_unlock(dev);
> +
> return rc;
> }
> /**
> @@ -3484,17 +3508,11 @@ int pci_reset_function(struct pci_dev *dev)
> if (rc)
> return rc;
>
> - pci_save_state(dev);
> -
> - /*
> - * both INTx and MSI are disabled after the Interrupt Disable bit
> - * is set and the Bus Master bit is cleared.
> - */
> - pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
> + pci_dev_save_and_disable(dev);
>
> rc = pci_dev_reset(dev, 0);
>
> - pci_restore_state(dev);
> + pci_dev_restore(dev);
>
> return rc;
> }
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-08-01 20:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-01 16:55 [PATCH v3 0/9] pci: bus and slot reset interfaces Alex Williamson
2013-08-01 16:55 ` [PATCH v3 1/9] pci: Create pci_reset_bridge_secondary_bus() Alex Williamson
2013-08-01 16:55 ` [PATCH v3 2/9] pci: Add hotplug_slot_ops.reset_slot() Alex Williamson
2013-08-01 16:55 ` [PATCH v3 3/9] pci: Implement reset_slot for pciehp Alex Williamson
2013-08-01 16:55 ` [PATCH v3 4/9] pci: Add slot reset option to pci_dev_reset Alex Williamson
2013-08-01 16:55 ` [PATCH v3 5/9] pci: Split out pci_dev lock/unlock and save/restore Alex Williamson
2013-08-01 20:59 ` Don Dutile [this message]
2013-08-01 21:04 ` Alex Williamson
2013-08-01 16:55 ` [PATCH v3 6/9] pci: Add slot and bus reset interfaces Alex Williamson
2013-08-01 21:22 ` Don Dutile
2013-08-01 21:32 ` Alex Williamson
2013-08-01 16:55 ` [PATCH v3 7/9] pci: Wake-up devices before save for reset Alex Williamson
2013-08-01 16:55 ` [PATCH v3 8/9] pci: Tune secondary bus reset timing Alex Williamson
2013-08-01 21:29 ` Don Dutile
2013-08-01 21:41 ` Alex Williamson
2013-08-01 21:55 ` Don Dutile
2013-08-01 16:56 ` [PATCH v3 9/9] pci: Remove aer_do_secondary_bus_reset() Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51FACC22.10500@redhat.com \
--to=ddutile@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=bhelgaas@google.com \
--cc=indou.takao@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).