From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Alexander Gordeev <agordeev@redhat.com>
Cc: linux-kernel@vger.kernel.org, x86@kernel.org,
linux-pci@vger.kernel.org, linux-ide@vger.kernel.org,
Tejun Heo <tj@kernel.org>, Ingo Molnar <mingo@kernel.org>,
Joerg Roedel <joro@8bytes.org>, Jan Beulich <JBeulich@suse.com>,
Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [PATCH v2 5/6] AHCI: Check MRSM bit when multiple MSIs enabled
Date: Thu, 05 Sep 2013 18:32:36 +0400 [thread overview]
Message-ID: <52289604.50202@cogentembedded.com> (raw)
In-Reply-To: <4bc31d6ccf3f84399b977fe8ed4fe77aadfa1c79.1378383792.git.agordeev@redhat.com>
Hello.
On 09/05/2013 04:54 PM, Alexander Gordeev wrote:
> Do not trust the hardware and always check if MSI
> Revert to Single Message mode was enforced. Fall
> back to the single MSI mode in case it did. Not
> doing so might screw up the interrupt handling.
> Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
> ---
> drivers/ata/ahci.c | 16 ++++++++++++++++
> drivers/ata/ahci.h | 1 +
> 2 files changed, 17 insertions(+), 0 deletions(-)
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index a6bb618..af5d535 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -1091,6 +1091,14 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
> {}
> #endif
>
> +static int ahci_get_mrsm(struct ahci_host_priv *hpriv)
> +{
> + void __iomem *mmio = hpriv->mmio;
> + u32 ctl = readl(mmio + HOST_CTL);
> +
> + return (ctl & HOST_MRSM);
Parens not needed here, in case you'll respin this once more.
WBR, Sergei
next prev parent reply other threads:[~2013-09-05 14:32 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-05 12:51 [PATCH v2 0/6] AHCI: Conserve interrupts with pci_enable_msi_block_part() interface Alexander Gordeev
2013-09-05 12:52 ` [PATCH v2 1/6] PCI/MSI: Introduce " Alexander Gordeev
2013-09-05 12:52 ` [PATCH v2 2/6] PCI/MSI: Factor out pci_get_msi_cap() interface Alexander Gordeev
2013-09-05 13:09 ` Tejun Heo
2013-09-05 15:03 ` Alexander Gordeev
2013-09-05 15:04 ` Tejun Heo
2013-09-05 15:40 ` Alexander Gordeev
2013-09-05 15:44 ` Tejun Heo
2013-09-05 18:54 ` Alexander Gordeev
2013-09-05 20:06 ` Tejun Heo
2013-09-06 16:01 ` Bjorn Helgaas
2013-09-06 16:06 ` Tejun Heo
2013-09-06 23:32 ` Bjorn Helgaas
2013-09-09 15:20 ` Alexander Gordeev
2013-09-09 15:22 ` [PATCH 1/9] PCI/MSI/PPC: Fix wrong RTAS error code reporting Alexander Gordeev
2013-09-09 15:22 ` [PATCH 2/9] PCI/MSI/PPC: Make return values only 0/-errno when MSIs allocated Alexander Gordeev
2013-09-09 15:24 ` [PATCH 3/9] PCI/MSI/x86: " Alexander Gordeev
2013-09-09 15:24 ` [PATCH 4/9] PCI/MSI/MIPS: " Alexander Gordeev
2013-09-09 15:25 ` [PATCH 2/9] PCI/MSI/PPC: Make return values only 0/-errno when MSIs allocated[PATCH 5/9] PCI/MSI/s390: " Alexander Gordeev
2013-09-09 15:38 ` scrap this one Alexander Gordeev
2013-09-09 15:26 ` [PATCH 5/9] PCI/MSI/s390: Make return values only 0/-errno when MSIs allocated Alexander Gordeev
2013-09-10 12:42 ` Sergei Shtylyov
2013-09-10 13:09 ` Alexander Gordeev
2013-09-09 15:27 ` [PATCH 6/9] PCI/MSI/s390: Remove superfluous check of MSI type Alexander Gordeev
2013-09-09 15:28 ` [PATCH 7/9] PCI/MSI/s390: Make return values only 0/-errno when MSIs allocated Alexander Gordeev
2013-09-09 15:29 ` [PATCH 8/9] PCI/MSI: Fix return value when populate_msi_sysfs() failed Alexander Gordeev
2013-09-09 15:29 ` [PATCH 9/9] PCI/MSI: Make return values only 0/-errno when MSIs allocated Alexander Gordeev
2013-09-09 15:37 ` [PATCH v2 2/6] PCI/MSI: Factor out pci_get_msi_cap() interface Tejun Heo
2013-09-09 15:45 ` Alexander Gordeev
2013-09-16 10:22 ` Alexander Gordeev
2013-09-17 14:30 ` Michael Ellerman
2013-09-18 9:48 ` Alexander Gordeev
2013-09-18 14:22 ` Tejun Heo
2013-09-18 16:50 ` Alexander Gordeev
2013-09-20 8:24 ` Alexander Gordeev
2013-09-20 12:27 ` Tejun Heo
2013-09-25 18:02 ` Bjorn Helgaas
2013-09-25 20:58 ` Alexander Gordeev
2013-09-25 21:00 ` Tejun Heo
2013-09-26 7:46 ` Alexander Gordeev
2013-09-26 8:58 ` David Laight
2013-09-26 10:45 ` Alexander Gordeev
2013-09-26 11:34 ` David Laight
2013-09-26 12:13 ` Alexander Gordeev
2013-09-26 13:11 ` Tejun Heo
2013-09-26 14:39 ` Alexander Gordeev
2013-09-26 14:42 ` Tejun Heo
2013-10-01 7:19 ` Michael Ellerman
2013-09-20 12:26 ` Tejun Heo
2013-10-01 7:26 ` Michael Ellerman
2013-10-01 7:35 ` Michael Ellerman
2013-10-01 11:55 ` Tejun Heo
2013-10-02 2:33 ` Michael Ellerman
2013-10-02 3:23 ` Tejun Heo
2013-09-26 12:32 ` Mark Lord
2013-09-26 13:03 ` Alexander Gordeev
2013-10-02 2:46 ` Mark Lord
2013-10-02 7:26 ` Alexander Gordeev
2013-12-18 18:26 ` Bjorn Helgaas
2013-10-01 7:51 ` Michael Ellerman
2013-10-01 10:35 ` Alexander Gordeev
2013-10-02 2:43 ` Michael Ellerman
2013-10-02 7:10 ` Alexander Gordeev
2013-09-06 13:17 ` Alexander Gordeev
2013-09-05 12:53 ` [PATCH v2 3/6] MSI/x86: Support pci_enable_msi_block_part() interface Alexander Gordeev
2013-09-05 12:53 ` [PATCH v2 4/6] AHCI: Conserve interrupts with " Alexander Gordeev
2013-09-05 13:10 ` Tejun Heo
2013-09-05 15:23 ` Alexander Gordeev
2013-09-05 12:54 ` [PATCH v2 5/6] AHCI: Check MRSM bit when multiple MSIs enabled Alexander Gordeev
2013-09-05 13:11 ` Tejun Heo
2013-09-05 15:25 ` Alexander Gordeev
2013-09-05 14:32 ` Sergei Shtylyov [this message]
2013-09-05 12:54 ` [PATCH v2 6/6] PCI/MSI: Get rid of pci_enable_msi_block_auto() interface Alexander Gordeev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52289604.50202@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=JBeulich@suse.com \
--cc=agordeev@redhat.com \
--cc=bhelgaas@google.com \
--cc=joro@8bytes.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=tj@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).