From: Murali Karicheri <m-karicheri2@ti.com>
To: <linux-pci@vger.kernel.org>
Subject: SATA AHCI controller detection during PCI enumeration
Date: Tue, 24 Jun 2014 10:26:29 -0400 [thread overview]
Message-ID: <53A98A95.2030401@ti.com> (raw)
All,
I have a board with PCI controller connected to a Marvell AHCI
controller, 88SE9182 connected to a PCIe bus and the PCI scan doesn't
show up the SATA end point. My question is in order to detect the EP,
is it expected to have a hard drive connected to the SATA port?
Currently with and without the SATA connected, the PCI scan doesn't
show up the device. Also is there any other requirements at the
hardware level to detect this SATA controller.
Thanks in advance for your reply.
Murali
next reply other threads:[~2014-06-24 14:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-24 14:26 Murali Karicheri [this message]
2014-06-25 4:01 ` SATA AHCI controller detection during PCI enumeration Pratyush Anand
2014-06-25 14:25 ` Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53A98A95.2030401@ti.com \
--to=m-karicheri2@ti.com \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).