From: Yijing Wang <wangyijing@huawei.com>
To: Jiang Liu <jiang.liu@linux.intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>,
Grant Likely <grant.likely@linaro.org>,
Marc Zyngier <marc.zyngier@arm.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>,
"Borislav Petkov" <bp@alien8.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Alexander Gordeev <agordeev@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>, <linux-kernel@vger.kernel.org>,
<linux-pci@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [Patch V1 3/6] genirq: Introduce msi_irq_domain_{alloc|free}_irqs()
Date: Thu, 13 Nov 2014 20:57:55 +0800 [thread overview]
Message-ID: <5464AAD3.2020908@huawei.com> (raw)
In-Reply-To: <5464A6F6.3070506@linux.intel.com>
On 2014/11/13 20:41, Jiang Liu wrote:
> On 2014/11/13 20:34, Yijing Wang wrote:
>> Gerry, this patch seems to be the same as last one.
> Do you means patch 6/6? They are different:)
Oh, it's not the patch problem, I received two double patch.
>
>>
>>
>> On 2014/11/13 19:43, Jiang Liu wrote:
>>> Introduce msi_irq_domain_{alloc|free}_irqs() to alloc/free interrupts
>>> from irqdomain for generic MSI interrupts.
>>>
>>> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
>>> ---
>>> include/linux/msi.h | 35 ++++++++++++++++++++++++++++++
>>> kernel/irq/msi.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++
>>> 2 files changed, 94 insertions(+)
>>>
>>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>>> index 714716a3ffdd..6b356a1410b2 100644
>>> --- a/include/linux/msi.h
>>> +++ b/include/linux/msi.h
>>> @@ -3,6 +3,7 @@
>>>
>>> #include <linux/kobject.h>
>>> #include <linux/list.h>
>>> +#include <asm/hw_irq.h> /* for msi_alloc_info_t */
>>>
>>> struct msi_msg {
>>> u32 address_lo; /* low 32 bits of msi message address */
>>> @@ -100,7 +101,26 @@ struct irq_chip;
>>> struct device_node;
>>> struct msi_domain_info;
>>>
>>> +#ifndef NUM_MSI_ALLOC_SCRATCHPAD_REGS
>>> +#define NUM_MSI_ALLOC_SCRATCHPAD_REGS 2
>>> +#endif
>>> +
>>> +/*
>>> + * Default structure for MSI interrupt allocation.
>>> + * Arch may overwrite it by define msi_alloc_info_t.
>>> + */
>>> +struct msi_alloc_info {
>>> + struct msi_desc *desc;
>>> + irq_hw_number_t hwirq;
>>> + long scratchpad[NUM_MSI_ALLOC_SCRATCHPAD_REGS];
>>> +};
>>> +
>>> +#ifndef msi_alloc_info_t
>>> +typedef struct msi_alloc_info msi_alloc_info_t;
>>> +#endif
>>> +
>>> struct msi_domain_ops {
>>> + /* Callbacks for msi_create_irq_domain() */
>>> void (*calc_hwirq)(struct msi_domain_info *info, void *arg,
>>> struct msi_desc *desc);
>>> irq_hw_number_t (*get_hwirq)(struct msi_domain_info *info, void *arg);
>>> @@ -111,6 +131,19 @@ struct msi_domain_ops {
>>> void (*msi_free)(struct irq_domain *domain,
>>> struct msi_domain_info *info,
>>> unsigned int virq);
>>> +
>>> + /* Callbacks for msi_irq_domain_alloc_irqs() based on msi_descs */
>>> + int (*msi_check)(struct irq_domain *domain,
>>> + struct msi_domain_info *info,
>>> + struct device *dev);
>>> + int (*msi_prepare)(struct irq_domain *domain,
>>> + struct device *dev,
>>> + msi_alloc_info_t *arg);
>>> + void (*msi_finish)(msi_alloc_info_t *arg, int retval);
>>> + void (*set_desc)(msi_alloc_info_t *arg,
>>> + struct msi_desc *desc);
>>> + int (*handle_error)(struct irq_domain *domain,
>>> + struct msi_desc *desc, int error);
>>> };
>>>
>>> struct msi_domain_info {
>>> @@ -125,6 +158,8 @@ int msi_domain_set_affinity(struct irq_data *data, const struct cpumask *mask,
>>> struct irq_domain *msi_create_irq_domain(struct device_node *of_node,
>>> struct msi_domain_info *info,
>>> struct irq_domain *parent);
>>> +int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev);
>>> +void msi_domain_free_irqs(struct irq_domain *domain, struct device *dev);
>>> struct msi_domain_info *msi_get_domain_info(struct irq_domain *domain);
>>>
>>> #endif /* CONFIG_GENERIC_MSI_IRQ_DOMAIN */
>>> diff --git a/kernel/irq/msi.c b/kernel/irq/msi.c
>>> index 94d6d87ee23e..0b6665de3a60 100644
>>> --- a/kernel/irq/msi.c
>>> +++ b/kernel/irq/msi.c
>>> @@ -13,6 +13,9 @@
>>> #include <linux/irqdomain.h>
>>> #include <linux/msi.h>
>>>
>>> +/* Temparory solution for building, will be removed later */
>>> +#include <linux/pci.h>
>>> +
>>> void __get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
>>> {
>>> *msg = entry->msg;
>>> @@ -124,6 +127,62 @@ struct irq_domain *msi_create_irq_domain(struct device_node *of_node,
>>> return domain;
>>> }
>>>
>>> +int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev)
>>> +{
>>> + int i, ret, virq = -1;
>>> + msi_alloc_info_t arg;
>>> + struct msi_desc *desc;
>>> + struct msi_domain_info *info = domain->host_data;
>>> + struct msi_domain_ops *ops = info->ops;
>>> +
>>> + ret = ops->msi_check(domain, info, dev);
>>> + if (ret == 0)
>>> + ret = ops->msi_prepare(domain, dev, &arg);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + for_each_msi_entry(desc, dev) {
>>> + ops->set_desc(&arg, desc);
>>> +
>>> + virq = __irq_domain_alloc_irqs(domain, -1, desc->nvec_used,
>>> + dev_to_node(dev), &arg, false);
>>> + if (virq < 0) {
>>> + ret = -ENOSPC;
>>> + if (ops->handle_error)
>>> + ret = ops->handle_error(domain, desc, ret);
>>> + if (ops->msi_finish)
>>> + ops->msi_finish(&arg, ret);
>>> + return ret;
>>> + }
>>> +
>>> + for (i = 0; i < desc->nvec_used; i++)
>>> + irq_set_msi_desc_off(virq, i, desc);
>>> + }
>>> +
>>> + if (ops->msi_finish)
>>> + ops->msi_finish(&arg, 0);
>>> +
>>> + for_each_msi_entry(desc, dev) {
>>> + if (desc->nvec_used == 1)
>>> + dev_dbg(dev, "irq %d for MSI\n", virq);
>>> + else
>>> + dev_dbg(dev, "irq [%d-%d] for MSI\n",
>>> + virq, virq + desc->nvec_used - 1);
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +void msi_domain_free_irqs(struct irq_domain *domain, struct device *dev)
>>> +{
>>> + struct msi_desc *desc;
>>> +
>>> + for_each_msi_entry(desc, dev) {
>>> + irq_domain_free_irqs(desc->irq, desc->nvec_used);
>>> + desc->irq = 0;
>>> + }
>>> +}
>>> +
>>> struct msi_domain_info *msi_get_domain_info(struct irq_domain *domain)
>>> {
>>> return (struct msi_domain_info *)domain->host_data;
>>>
>>
>>
>
> .
>
--
Thanks!
Yijing
next prev parent reply other threads:[~2014-11-13 13:00 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-13 11:43 [Patch V1 0/6] Refine generic/PCI MSI irqodmian interfaces Jiang Liu
2014-11-13 11:43 ` [Patch V1 1/6] PCI, MSI: Fix errors caused by commit e5f1a59c4e12 Jiang Liu
2014-11-13 11:43 ` [Patch V1 2/6] PCI, MSI: Introduce helpers to hide struct msi_desc implemenation details Jiang Liu
2014-11-13 11:43 ` [Patch V1 3/6] genirq: Introduce msi_domain_{alloc|free}_irqs() Jiang Liu
2014-11-13 20:23 ` Marc Zyngier
2014-11-14 0:18 ` Jiang Liu
2014-11-13 11:43 ` [Patch V1 3/6] genirq: Introduce msi_irq_domain_{alloc|free}_irqs() Jiang Liu
2014-11-13 12:34 ` Yijing Wang
2014-11-13 12:41 ` Jiang Liu
2014-11-13 12:57 ` Yijing Wang [this message]
2014-11-13 11:43 ` [Patch V1 4/6] genirq: Provide default callbacks for msi_domain_ops Jiang Liu
2014-11-13 11:43 ` [Patch V1 5/6] PCI, MSI: Refine irqdomain interfaces to simplify its usage Jiang Liu
2014-11-13 11:43 ` [Patch V1 6/6] PCI, MSI: Provide mechanism to alloc/free MSI/MSIX interrupt from irqdomain Jiang Liu
2014-11-13 19:46 ` Marc Zyngier
2014-11-13 12:28 ` [Patch V1 0/6] Refine generic/PCI MSI irqodmian interfaces Yijing Wang
2014-11-13 12:39 ` Jiang Liu
2014-11-13 12:55 ` Yijing Wang
2014-11-13 13:03 ` Jiang Liu
2014-11-13 13:05 ` Jiang Liu
2014-11-13 21:00 ` Marc Zyngier
2014-11-13 21:11 ` Thomas Gleixner
2014-11-13 21:28 ` Marc Zyngier
2014-11-14 15:54 ` Jiang Liu
2014-11-14 16:13 ` Marc Zyngier
2014-11-14 0:25 ` Jiang Liu
2014-11-14 1:09 ` Yijing Wang
2014-11-14 1:22 ` Jiang Liu
2014-11-14 1:31 ` Thomas Gleixner
2014-11-14 1:39 ` Jiang Liu
2014-11-14 12:13 ` Thomas Gleixner
2014-11-14 14:11 ` Yijing Wang
2014-11-14 14:26 ` Jiang Liu
2014-11-14 15:16 ` Marc Zyngier
2014-11-14 15:25 ` Jiang Liu
2014-11-14 16:03 ` Marc Zyngier
2014-11-14 17:11 ` Lucas Stach
2014-11-14 2:16 ` Yijing Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5464AAD3.2020908@huawei.com \
--to=wangyijing@huawei.com \
--cc=agordeev@redhat.com \
--cc=bhelgaas@google.com \
--cc=bp@alien8.de \
--cc=grant.likely@linaro.org \
--cc=hpa@zytor.com \
--cc=jiang.liu@linux.intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).