From: Murali Karicheri <m-karicheri2@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: <linux-pci@vger.kernel.org>, <linux@arm.linux.org.uk>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] ARM/PCI: set MPS before pci_bus_add_devices()
Date: Mon, 3 Aug 2015 14:18:18 -0400 [thread overview]
Message-ID: <55BFB06A.3040904@ti.com> (raw)
In-Reply-To: <20150723145936.GX21967@google.com>
On 07/23/2015 10:59 AM, Bjorn Helgaas wrote:
> On Tue, Jul 21, 2015 at 05:35:19PM -0400, Murali Karicheri wrote:
>> The MPS configuration should be done *before* pci_bus_add_devices().
>> After pci_bus_add_devices(), drivers may be bound to devices, and
>> the PCI core shouldn't touch device configuration while a driver
>> owns the device.
>>
>> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
>> Reported-by: Bjorn Helgaas <bhelgaas@google.com>
>
> Applied to pci/enumeration for v4.3, thanks! I removed the "bus" test; let
> me know if you think that's incorrect.
Ok. Will do. Thanks.
Murali
>
>> ---
>> arch/arm/kernel/bios32.c | 19 +++++--------------
>> 1 file changed, 5 insertions(+), 14 deletions(-)
>>
>> diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
>> index fcbbbb1..17efde7 100644
>> --- a/arch/arm/kernel/bios32.c
>> +++ b/arch/arm/kernel/bios32.c
>> @@ -520,7 +520,8 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
>> list_for_each_entry(sys, &head, node) {
>> struct pci_bus *bus = sys->bus;
>>
>> - if (!pci_has_flag(PCI_PROBE_ONLY)) {
>> + if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
>
> I think the test for "bus" being non-NULL is superfluous here. If "bus"
> were NULL, we would already oops in pci_bus_add_devices().
>
>> + struct pci_bus *child;
>> /*
>> * Size the bridge windows.
>> */
>> @@ -530,25 +531,15 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
>> * Assign resources.
>> */
>> pci_bus_assign_resources(bus);
>> - }
>>
>> + list_for_each_entry(child, &bus->children, node)
>> + pcie_bus_configure_settings(child);
>> + }
>> /*
>> * Tell drivers about devices found.
>> */
>> pci_bus_add_devices(bus);
>> }
>> -
>> - list_for_each_entry(sys, &head, node) {
>> - struct pci_bus *bus = sys->bus;
>> -
>> - /* Configure PCI Express settings */
>> - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
>> - struct pci_bus *child;
>> -
>> - list_for_each_entry(child, &bus->children, node)
>> - pcie_bus_configure_settings(child);
>> - }
>> - }
>> }
>>
>> #ifndef CONFIG_PCI_HOST_ITE8152
>> --
>> 1.9.1
>>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Murali Karicheri
Linux Kernel, Keystone
next prev parent reply other threads:[~2015-08-03 18:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-21 21:35 [PATCH] ARM/PCI: set MPS before pci_bus_add_devices() Murali Karicheri
2015-07-23 14:24 ` Murali Karicheri
2015-07-23 14:59 ` Bjorn Helgaas
2015-08-03 18:18 ` Murali Karicheri [this message]
2015-08-03 19:13 ` Russell King - ARM Linux
2015-08-03 22:34 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55BFB06A.3040904@ti.com \
--to=m-karicheri2@ti.com \
--cc=bhelgaas@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).