From: Jiang Liu <jiang.liu@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Arthur Marsh <arthur.marsh@internode.on.net>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
"x86@kernel.org" <x86@kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>
Subject: Re: [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers
Date: Thu, 10 Sep 2015 16:58:01 +0800 [thread overview]
Message-ID: <55F14619.4030007@linux.intel.com> (raw)
In-Reply-To: <CAErSpo4oignSpK-LCLO=deW_FZ-V58GUhBxJ5uvmXe4DYo4WdA@mail.gmail.com>
On 2015/9/10 3:11, Bjorn Helgaas wrote:
> On Tue, Sep 8, 2015 at 11:49 AM, Jiang Liu <jiang.liu@linux.intel.com> wrote:
>> Hi Bjorn,
>> We have used another draft version to fix this issue by changing
>> eata driver as below. But that needs to export pcibios_alloc_irq. And
>> I'm not sure whether there are other drivers having the same behavior.
>> If we think it's a legacy behavior and only a few drivers may have
>> such a behavior, I prefer changing drivers to fix the issue too.
>
> Did you look at changing the driver to use pci_register_driver()? I
> bet it's pretty straightforward.
Hi Bjorn,
I have done some investigation. It's doable, but the change
may be a little bigger. Will send the patch out for comments once
it's done.
Thanks!
Gerry
>
>> drivers/pci/pci-driver.c | 1 +
>> drivers/scsi/eata.c | 2 ++
>> 2 files changed, 3 insertions(+)
>>
>> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
>> index 52a880ca1768..17d2a0b1de18 100644
>> --- a/drivers/pci/pci-driver.c
>> +++ b/drivers/pci/pci-driver.c
>> @@ -392,6 +392,7 @@ int __weak pcibios_alloc_irq(struct pci_dev *dev)
>> {
>> return 0;
>> }
>> +EXPORT_SYMBOL_GPL(pcibios_alloc_irq);
>>
>> void __weak pcibios_free_irq(struct pci_dev *dev)
>> {
>> diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
>> index 227dd2c2ec2f..7e6eaf867987 100644
>> --- a/drivers/scsi/eata.c
>> +++ b/drivers/scsi/eata.c
>> @@ -1061,6 +1061,7 @@ static void enable_pci_ports(void)
>> driver_name, dev->bus->number, dev->devfn);
>> #endif
>>
>> + pcibios_alloc_irq(dev);
>> if (pci_enable_device(dev))
>> printk
>> ("%s: warning, pci_enable_device failed, bus %d devfn 0x%x.\n",
>> @@ -1520,6 +1521,7 @@ static void add_pci_ports(void)
>> if (!(dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev)))
>> break;
>>
>> + pcibios_alloc_irq(dev);
>> if (pci_enable_device(dev)) {
>> #if defined(DEBUG_PCI_DETECT)
>> printk
>>
>>
>>>
>>>> return pci_enable_resources(dev, mask);
>>>> }
>>>>
>>>> --
>>>> 1.7.10.4
>>>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2015-09-10 8:58 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <55EE8106.6060100@internode.on.net>
2015-09-08 7:26 ` [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Jiang Liu
2015-09-08 9:03 ` Arthur Marsh
2015-09-08 9:44 ` Jiang Liu
2015-09-08 16:27 ` Bjorn Helgaas
2015-09-08 16:49 ` Jiang Liu
2015-09-09 19:11 ` Bjorn Helgaas
2015-09-10 8:58 ` Jiang Liu [this message]
2015-09-14 3:08 ` [Bugfix 0/3] Convert eata driver to a normal PCI device driver Jiang Liu
2015-09-14 3:08 ` [Bugfix 1/3] eata: Use IDA to manage eata board IDs Jiang Liu
2015-09-14 8:08 ` Hannes Reinecke
2015-09-14 3:08 ` [Bugfix 2/3] eata: Implement PCI driver to manage eata PCI devices Jiang Liu
2015-09-14 8:17 ` Hannes Reinecke
2015-09-14 8:31 ` Jiang Liu
2015-09-14 3:08 ` [Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal Jiang Liu
2015-09-14 8:21 ` Hannes Reinecke
2015-09-14 8:31 ` Ballabio, Dario
2015-09-14 8:33 ` Jiang Liu
2015-09-16 13:42 ` Christoph Hellwig
2015-09-17 6:49 ` Jiang Liu
2015-09-18 15:08 ` Arthur Marsh
2015-09-22 7:30 ` [RFT v3] eata: Convert eata driver as normal PCI and platform device drivers Jiang Liu
2015-09-22 20:27 ` Hannes Reinecke
2015-09-22 22:25 ` Arthur Marsh
2015-09-22 22:45 ` James Bottomley
2015-09-22 23:36 ` Arthur Marsh
2015-09-23 5:24 ` Jiang Liu
2015-09-23 10:44 ` Arthur Marsh
2015-09-23 14:40 ` James Bottomley
2015-09-24 4:28 ` Jiang Liu
2015-09-24 5:56 ` Arthur Marsh
2015-09-26 6:27 ` Arthur Marsh
2015-10-03 8:11 ` Jiang Liu
2015-10-03 11:14 ` Arthur Marsh
2015-10-05 8:29 ` Arthur Marsh
2015-09-14 16:01 ` [Bugfix 0/3] Convert eata driver to a normal PCI device driver Arthur Marsh
2015-09-15 2:31 ` Jiang Liu
2015-09-15 7:19 ` Arthur Marsh
2015-09-16 5:07 ` Jiang Liu
2015-09-16 7:37 ` Arthur Marsh
2015-09-16 8:21 ` Jiang Liu
2015-09-16 11:29 ` Arthur Marsh
2015-09-09 19:04 ` [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Arthur Marsh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55F14619.4030007@linux.intel.com \
--to=jiang.liu@linux.intel.com \
--cc=arthur.marsh@internode.on.net \
--cc=bhelgaas@google.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).