From: Arthur Marsh <arthur.marsh@internode.on.net>
To: Jiang Liu <jiang.liu@linux.intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
linux-scsi@vger.kernel.org, x86@kernel.org
Subject: Re: [Bugfix 0/3] Convert eata driver to a normal PCI device driver
Date: Wed, 16 Sep 2015 20:59:54 +0930 [thread overview]
Message-ID: <55F952B2.6080102@internode.on.net> (raw)
In-Reply-To: <55F9266C.5060609@linux.intel.com>
Jiang Liu wrote on 16/09/15 17:51:
> Hi Arthur,
> It would be great if we could capture the text as in the
> picture posted by you at:
> http://www.users.on.net/~arthur.marsh/20150915547.jpg
> I guess a serial console could help us to capture those
> log messages. To use serial console, we need to setup serial cable,
> configure grub and kernel to use serial port as console.
> Thanks!
> Gerry
>
>>
>> Regards,
>>
>> Arthur.
>
I've already included the text of what appeaered in the image above:
sd 0:0:6:0: abort, mbox 63.
EATA0: abort, mbox 63 is in use.
sd 0:0:6:0: reset, enter.
EATA0: reset, mbox 63 in reset.
EATA0: reset, board reset done, enabling interrupts.
EATA0: reset, interrupts disabled, loops 100469.
EATA0: reset, mbox 63 locked, DID_RESET, done.
EATA0: reset, exit, done.
sd 0:0:6:0: qcomm, mbox 0, adapter busy, will start
sd 0:0:6:0: abort, mbox 0.
EATA0: abort, timeout error.
sd 0:0:6:0: reset, enter.
EATA0: reset, exit, timeout error.
sd 0:0:6:0 Device offlinled - not ready after error recovery
sd 0:0:6:0 rejecting I/O to offline device
sd 0:0:6:0 rejecting I/O to offline device
sd 0:0:6:0 [sda] Synchronize Cache(10) failed: Result:
hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
starting new kernel
As mentioned previously this occurred after the normal Synchronizing
SCSI cache messages.
I don't think that there is anything else that gets sent to the console.
Arthur.
next prev parent reply other threads:[~2015-09-16 11:29 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <55EE8106.6060100@internode.on.net>
2015-09-08 7:26 ` [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Jiang Liu
2015-09-08 9:03 ` Arthur Marsh
2015-09-08 9:44 ` Jiang Liu
2015-09-08 16:27 ` Bjorn Helgaas
2015-09-08 16:49 ` Jiang Liu
2015-09-09 19:11 ` Bjorn Helgaas
2015-09-10 8:58 ` Jiang Liu
2015-09-14 3:08 ` [Bugfix 0/3] Convert eata driver to a normal PCI device driver Jiang Liu
2015-09-14 3:08 ` [Bugfix 1/3] eata: Use IDA to manage eata board IDs Jiang Liu
2015-09-14 8:08 ` Hannes Reinecke
2015-09-14 3:08 ` [Bugfix 2/3] eata: Implement PCI driver to manage eata PCI devices Jiang Liu
2015-09-14 8:17 ` Hannes Reinecke
2015-09-14 8:31 ` Jiang Liu
2015-09-14 3:08 ` [Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal Jiang Liu
2015-09-14 8:21 ` Hannes Reinecke
2015-09-14 8:31 ` Ballabio, Dario
2015-09-14 8:33 ` Jiang Liu
2015-09-16 13:42 ` Christoph Hellwig
2015-09-17 6:49 ` Jiang Liu
2015-09-18 15:08 ` Arthur Marsh
2015-09-22 7:30 ` [RFT v3] eata: Convert eata driver as normal PCI and platform device drivers Jiang Liu
2015-09-22 20:27 ` Hannes Reinecke
2015-09-22 22:25 ` Arthur Marsh
2015-09-22 22:45 ` James Bottomley
2015-09-22 23:36 ` Arthur Marsh
2015-09-23 5:24 ` Jiang Liu
2015-09-23 10:44 ` Arthur Marsh
2015-09-23 14:40 ` James Bottomley
2015-09-24 4:28 ` Jiang Liu
2015-09-24 5:56 ` Arthur Marsh
2015-09-26 6:27 ` Arthur Marsh
2015-10-03 8:11 ` Jiang Liu
2015-10-03 11:14 ` Arthur Marsh
2015-10-05 8:29 ` Arthur Marsh
2015-09-14 16:01 ` [Bugfix 0/3] Convert eata driver to a normal PCI device driver Arthur Marsh
2015-09-15 2:31 ` Jiang Liu
2015-09-15 7:19 ` Arthur Marsh
2015-09-16 5:07 ` Jiang Liu
2015-09-16 7:37 ` Arthur Marsh
2015-09-16 8:21 ` Jiang Liu
2015-09-16 11:29 ` Arthur Marsh [this message]
2015-09-09 19:04 ` [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Arthur Marsh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55F952B2.6080102@internode.on.net \
--to=arthur.marsh@internode.on.net \
--cc=bhelgaas@google.com \
--cc=jiang.liu@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).