Re: Problems since commit Recognize that Interrupt Line 255 means "not connected"

Re: Problems since commit Recognize that Interrupt Line 255 means "not connected"

[Rafael J. Wysocki]

On Saturday, February 06, 2016 12:00:32 AM Heiner Kallweit wrote:
> Since commit a44c386a361e "x86/PCI/ACPI: Recognize that Interrupt Line 255
> means "not connected"" I get several "PCI INT not connected" warnings on
> a Zotac CI321 and EHCI failes to load:

That doesn't follow clearly from your report, but I'm assuming that it works
correctly without that commit, right?

> ehci-pci 0000:00:1d.0: PCI INT not connected
> ehci-pci 0000:00:1d.0: EHCI Host Controller
> ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
> ehci-pci 0000:00:1d.0: debug port 2
> ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> ehci-pci 0000:00:1d.0: request interrupt -2147483648 failed
> ehci-pci 0000:00:1d.0: USB bus 3 deregistered
> ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -107
> ehci-pci: probe of 0000:00:1d.0 failed with error -107
> 
> XHCI brings the "PCI INT not connected" warning too but loads properly
> (most likely because it uses a MSI interrupt).
> 
> Not sure whether this commit is to blame or a broken BIOS.
> Just let me know in case you need additional information.

Well, even if the BIOS is "broken" and the kernel without the above commit
is able to work with it, we cannot break that.

Thanks,
Rafael

Re: Problems since commit Recognize that Interrupt Line 255 means "not connected"

[Heiner Kallweit]

Am 06.02.2016 um 00:37 schrieb Rafael J. Wysocki:
> On Saturday, February 06, 2016 12:00:32 AM Heiner Kallweit wrote:
>> Since commit a44c386a361e "x86/PCI/ACPI: Recognize that Interrupt Line 255
>> means "not connected"" I get several "PCI INT not connected" warnings on
>> a Zotac CI321 and EHCI failes to load:
> 
> That doesn't follow clearly from your report, but I'm assuming that it works
> correctly without that commit, right?
> 
Right, w/o this commit it looks like this:

dmesg
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000

/proc/interrupts
IO-APIC  23-fasteoi   ehci_hcd:usb3

>> ehci-pci 0000:00:1d.0: PCI INT not connected
>> ehci-pci 0000:00:1d.0: EHCI Host Controller
>> ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
>> ehci-pci 0000:00:1d.0: debug port 2
>> ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>> ehci-pci 0000:00:1d.0: request interrupt -2147483648 failed
>> ehci-pci 0000:00:1d.0: USB bus 3 deregistered
>> ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -107
>> ehci-pci: probe of 0000:00:1d.0 failed with error -107
>>
>> XHCI brings the "PCI INT not connected" warning too but loads properly
>> (most likely because it uses a MSI interrupt).
>>
>> Not sure whether this commit is to blame or a broken BIOS.
>> Just let me know in case you need additional information.
> 
> Well, even if the BIOS is "broken" and the kernel without the above commit
> is able to work with it, we cannot break that.
> 
> Thanks,
> Rafael
> 
> 

Re: Problems since commit Recognize that Interrupt Line 255 means "not connected"

[Bjorn Helgaas]

Hi Heiner,

On Sat, Feb 06, 2016 at 09:09:47AM +0100, Heiner Kallweit wrote:
> Am 06.02.2016 um 00:37 schrieb Rafael J. Wysocki:
> > On Saturday, February 06, 2016 12:00:32 AM Heiner Kallweit wrote:
> >> Since commit a44c386a361e "x86/PCI/ACPI: Recognize that Interrupt Line 255
> >> means "not connected"" I get several "PCI INT not connected" warnings on
> >> a Zotac CI321 and EHCI failes to load:
> > 
> > That doesn't follow clearly from your report, but I'm assuming that it works
> > correctly without that commit, right?
> > 
> Right, w/o this commit it looks like this:
> 
> dmesg
> ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000
> 
> /proc/interrupts
> IO-APIC  23-fasteoi   ehci_hcd:usb3

Thanks a lot for your report!  This is a bit of a minefield, and I was
worried that we'd trip over something with a44c386a361e.

Oops, I think I see a problem with a44c386a361e.  We're checking for
Interrupt Line == 255 even before we try to look it up in the _PRT.  I
think we should only check Interrupt Line *after* everything else has
failed.  Can you try the patch below instead of a44c386a361e?

If the patch below doesn't work, would you mind collecting the
complete output of "lspci -vvv" and the complete dmesg logs from
kernels with and without a44c386a361e, and putting them somewhere
(maybe a bugzilla.kernel.org report)?

Bjorn


diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index d30184c..807a0a8 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -33,6 +33,7 @@
 #include <linux/pci.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
+#include <linux/interrupt.h>
 
 #define PREFIX "ACPI: "
 
@@ -387,6 +388,23 @@ static inline int acpi_isa_register_gsi(struct pci_dev *dev)
 }
 #endif
 
+static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin)
+{
+#ifdef CONFIG_X86
+	/*
+	 * On x86, Interrupt Line 0xff means "unknown" or "no connection"
+	 * (PCI 3.0, Section 6.2.4, footnote on page 223).
+	 */
+	if (dev->irq == 0xff) {
+		dev->irq = IRQ_NOTCONNECTED;
+		dev_warn(&dev->dev, "PCI INT %c: not connected\n",
+			 pin_name(pin));
+		return false;
+	}
+#endif
+	return true;
+}
+
 int acpi_pci_irq_enable(struct pci_dev *dev)
 {
 	struct acpi_prt_entry *entry;
@@ -431,11 +449,14 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 	} else
 		gsi = -1;
 
-	/*
-	 * No IRQ known to the ACPI subsystem - maybe the BIOS / 
-	 * driver reported one, then use it. Exit in any case.
-	 */
 	if (gsi < 0) {
+		/*
+		 * No IRQ known to the ACPI subsystem - maybe the BIOS /
+		 * driver reported one, then use it. Exit in any case.
+		 */
+		if (!acpi_pci_irq_valid(dev, pin))
+			return 0;
+
 		if (acpi_isa_register_gsi(dev))
 			dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
 				 pin_name(pin));
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 0e95fcc..358076e 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -125,6 +125,16 @@ struct irqaction {
 
 extern irqreturn_t no_action(int cpl, void *dev_id);
 
+/*
+ * If a (PCI) device interrupt is not connected we set dev->irq to
+ * IRQ_NOTCONNECTED. This causes request_irq() to fail with -ENOTCONN, so we
+ * can distingiush that case from other error returns.
+ *
+ * 0x80000000 is guaranteed to be outside the available range of interrupts
+ * and easy to distinguish from other possible incorrect values.
+ */
+#define IRQ_NOTCONNECTED	(1U << 31)
+
 extern int __must_check
 request_threaded_irq(unsigned int irq, irq_handler_t handler,
 		     irq_handler_t thread_fn,
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 8411872..e79e60f 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1609,6 +1609,9 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler,
 	struct irq_desc *desc;
 	int retval;
 
+	if (irq == IRQ_NOTCONNECTED)
+		return -ENOTCONN;
+
 	/*
 	 * Sanity-check: shared interrupts must pass in a real dev-ID,
 	 * otherwise we'll have trouble later trying to figure out
@@ -1699,9 +1702,13 @@ EXPORT_SYMBOL(request_threaded_irq);
 int request_any_context_irq(unsigned int irq, irq_handler_t handler,
 			    unsigned long flags, const char *name, void *dev_id)
 {
-	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_desc *desc;
 	int ret;
 
+	if (irq == IRQ_NOTCONNECTED)
+		return -ENOTCONN;
+
+	desc = irq_to_desc(irq);
 	if (!desc)
 		return -EINVAL;
 

Re: Problems since commit Recognize that Interrupt Line 255 means "not connected"

[Heiner Kallweit]

Am 06.02.2016 um 16:19 schrieb Bjorn Helgaas:
> Hi Heiner,
> 
> On Sat, Feb 06, 2016 at 09:09:47AM +0100, Heiner Kallweit wrote:
>> Am 06.02.2016 um 00:37 schrieb Rafael J. Wysocki:
>>> On Saturday, February 06, 2016 12:00:32 AM Heiner Kallweit wrote:
>>>> Since commit a44c386a361e "x86/PCI/ACPI: Recognize that Interrupt Line 255
>>>> means "not connected"" I get several "PCI INT not connected" warnings on
>>>> a Zotac CI321 and EHCI failes to load:
>>>
>>> That doesn't follow clearly from your report, but I'm assuming that it works
>>> correctly without that commit, right?
>>>
>> Right, w/o this commit it looks like this:
>>
>> dmesg
>> ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000
>>
>> /proc/interrupts
>> IO-APIC  23-fasteoi   ehci_hcd:usb3
> 
> Thanks a lot for your report!  This is a bit of a minefield, and I was
> worried that we'd trip over something with a44c386a361e.
> 
> Oops, I think I see a problem with a44c386a361e.  We're checking for
> Interrupt Line == 255 even before we try to look it up in the _PRT.  I
> think we should only check Interrupt Line *after* everything else has
> failed.  Can you try the patch below instead of a44c386a361e?
> 
With the attached patch everything is fine. No warnings and EHCI loads properly.

Regards, Heiner

> If the patch below doesn't work, would you mind collecting the
> complete output of "lspci -vvv" and the complete dmesg logs from
> kernels with and without a44c386a361e, and putting them somewhere
> (maybe a bugzilla.kernel.org report)?
> 
> Bjorn
> 
> 
> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> index d30184c..807a0a8 100644
> --- a/drivers/acpi/pci_irq.c
> +++ b/drivers/acpi/pci_irq.c
> @@ -33,6 +33,7 @@
>  #include <linux/pci.h>
>  #include <linux/acpi.h>
>  #include <linux/slab.h>
> +#include <linux/interrupt.h>
>  
>  #define PREFIX "ACPI: "
>  
> @@ -387,6 +388,23 @@ static inline int acpi_isa_register_gsi(struct pci_dev *dev)
>  }
>  #endif
>  
> +static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin)
> +{
> +#ifdef CONFIG_X86
> +	/*
> +	 * On x86, Interrupt Line 0xff means "unknown" or "no connection"
> +	 * (PCI 3.0, Section 6.2.4, footnote on page 223).
> +	 */
> +	if (dev->irq == 0xff) {
> +		dev->irq = IRQ_NOTCONNECTED;
> +		dev_warn(&dev->dev, "PCI INT %c: not connected\n",
> +			 pin_name(pin));
> +		return false;
> +	}
> +#endif
> +	return true;
> +}
> +
>  int acpi_pci_irq_enable(struct pci_dev *dev)
>  {
>  	struct acpi_prt_entry *entry;
> @@ -431,11 +449,14 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
>  	} else
>  		gsi = -1;
>  
> -	/*
> -	 * No IRQ known to the ACPI subsystem - maybe the BIOS / 
> -	 * driver reported one, then use it. Exit in any case.
> -	 */
>  	if (gsi < 0) {
> +		/*
> +		 * No IRQ known to the ACPI subsystem - maybe the BIOS /
> +		 * driver reported one, then use it. Exit in any case.
> +		 */
> +		if (!acpi_pci_irq_valid(dev, pin))
> +			return 0;
> +
>  		if (acpi_isa_register_gsi(dev))
>  			dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
>  				 pin_name(pin));
> diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
> index 0e95fcc..358076e 100644
> --- a/include/linux/interrupt.h
> +++ b/include/linux/interrupt.h
> @@ -125,6 +125,16 @@ struct irqaction {
>  
>  extern irqreturn_t no_action(int cpl, void *dev_id);
>  
> +/*
> + * If a (PCI) device interrupt is not connected we set dev->irq to
> + * IRQ_NOTCONNECTED. This causes request_irq() to fail with -ENOTCONN, so we
> + * can distingiush that case from other error returns.
> + *
> + * 0x80000000 is guaranteed to be outside the available range of interrupts
> + * and easy to distinguish from other possible incorrect values.
> + */
> +#define IRQ_NOTCONNECTED	(1U << 31)
> +
>  extern int __must_check
>  request_threaded_irq(unsigned int irq, irq_handler_t handler,
>  		     irq_handler_t thread_fn,
> diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
> index 8411872..e79e60f 100644
> --- a/kernel/irq/manage.c
> +++ b/kernel/irq/manage.c
> @@ -1609,6 +1609,9 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler,
>  	struct irq_desc *desc;
>  	int retval;
>  
> +	if (irq == IRQ_NOTCONNECTED)
> +		return -ENOTCONN;
> +
>  	/*
>  	 * Sanity-check: shared interrupts must pass in a real dev-ID,
>  	 * otherwise we'll have trouble later trying to figure out
> @@ -1699,9 +1702,13 @@ EXPORT_SYMBOL(request_threaded_irq);
>  int request_any_context_irq(unsigned int irq, irq_handler_t handler,
>  			    unsigned long flags, const char *name, void *dev_id)
>  {
> -	struct irq_desc *desc = irq_to_desc(irq);
> +	struct irq_desc *desc;
>  	int ret;
>  
> +	if (irq == IRQ_NOTCONNECTED)
> +		return -ENOTCONN;
> +
> +	desc = irq_to_desc(irq);
>  	if (!desc)
>  		return -EINVAL;
>  
> 

Re: Problems since commit Recognize that Interrupt Line 255 means "not connected"

[Bjorn Helgaas]

On Sat, Feb 06, 2016 at 04:43:14PM +0100, Heiner Kallweit wrote:
> Am 06.02.2016 um 16:19 schrieb Bjorn Helgaas:
> > On Sat, Feb 06, 2016 at 09:09:47AM +0100, Heiner Kallweit wrote:
> >> Am 06.02.2016 um 00:37 schrieb Rafael J. Wysocki:
> >>> On Saturday, February 06, 2016 12:00:32 AM Heiner Kallweit wrote:
> >>>> Since commit a44c386a361e "x86/PCI/ACPI: Recognize that Interrupt Line 255
> >>>> means "not connected"" I get several "PCI INT not connected" warnings on
> >>>> a Zotac CI321 and EHCI failes to load:
> >>>
> >>> That doesn't follow clearly from your report, but I'm assuming that it works
> >>> correctly without that commit, right?
> >>>
> >> Right, w/o this commit it looks like this:
> >>
> >> dmesg
> >> ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000
> >>
> >> /proc/interrupts
> >> IO-APIC  23-fasteoi   ehci_hcd:usb3
> > 
> > Thanks a lot for your report!  This is a bit of a minefield, and I was
> > worried that we'd trip over something with a44c386a361e.
> > 
> > Oops, I think I see a problem with a44c386a361e.  We're checking for
> > Interrupt Line == 255 even before we try to look it up in the _PRT.  I
> > think we should only check Interrupt Line *after* everything else has
> > failed.  Can you try the patch below instead of a44c386a361e?
> > 
> With the attached patch everything is fine. No warnings and EHCI loads properly.

Great, thanks a lot for testing this!

Chen, will you update and repost your patch?  I know Rafael already
had it on a branch, but I think he dropped it, so we need to get the
update merged somehow.

Bjorn

> > If the patch below doesn't work, would you mind collecting the
> > complete output of "lspci -vvv" and the complete dmesg logs from
> > kernels with and without a44c386a361e, and putting them somewhere
> > (maybe a bugzilla.kernel.org report)?
> > 
> > Bjorn
> > 
> > 
> > diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> > index d30184c..807a0a8 100644
> > --- a/drivers/acpi/pci_irq.c
> > +++ b/drivers/acpi/pci_irq.c
> > @@ -33,6 +33,7 @@
> >  #include <linux/pci.h>
> >  #include <linux/acpi.h>
> >  #include <linux/slab.h>
> > +#include <linux/interrupt.h>
> >  
> >  #define PREFIX "ACPI: "
> >  
> > @@ -387,6 +388,23 @@ static inline int acpi_isa_register_gsi(struct pci_dev *dev)
> >  }
> >  #endif
> >  
> > +static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin)
> > +{
> > +#ifdef CONFIG_X86
> > +	/*
> > +	 * On x86, Interrupt Line 0xff means "unknown" or "no connection"
> > +	 * (PCI 3.0, Section 6.2.4, footnote on page 223).
> > +	 */
> > +	if (dev->irq == 0xff) {
> > +		dev->irq = IRQ_NOTCONNECTED;
> > +		dev_warn(&dev->dev, "PCI INT %c: not connected\n",
> > +			 pin_name(pin));
> > +		return false;
> > +	}
> > +#endif
> > +	return true;
> > +}
> > +
> >  int acpi_pci_irq_enable(struct pci_dev *dev)
> >  {
> >  	struct acpi_prt_entry *entry;
> > @@ -431,11 +449,14 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
> >  	} else
> >  		gsi = -1;
> >  
> > -	/*
> > -	 * No IRQ known to the ACPI subsystem - maybe the BIOS / 
> > -	 * driver reported one, then use it. Exit in any case.
> > -	 */
> >  	if (gsi < 0) {
> > +		/*
> > +		 * No IRQ known to the ACPI subsystem - maybe the BIOS /
> > +		 * driver reported one, then use it. Exit in any case.
> > +		 */
> > +		if (!acpi_pci_irq_valid(dev, pin))
> > +			return 0;
> > +
> >  		if (acpi_isa_register_gsi(dev))
> >  			dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
> >  				 pin_name(pin));
> > diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
> > index 0e95fcc..358076e 100644
> > --- a/include/linux/interrupt.h
> > +++ b/include/linux/interrupt.h
> > @@ -125,6 +125,16 @@ struct irqaction {
> >  
> >  extern irqreturn_t no_action(int cpl, void *dev_id);
> >  
> > +/*
> > + * If a (PCI) device interrupt is not connected we set dev->irq to
> > + * IRQ_NOTCONNECTED. This causes request_irq() to fail with -ENOTCONN, so we
> > + * can distingiush that case from other error returns.
> > + *
> > + * 0x80000000 is guaranteed to be outside the available range of interrupts
> > + * and easy to distinguish from other possible incorrect values.
> > + */
> > +#define IRQ_NOTCONNECTED	(1U << 31)
> > +
> >  extern int __must_check
> >  request_threaded_irq(unsigned int irq, irq_handler_t handler,
> >  		     irq_handler_t thread_fn,
> > diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
> > index 8411872..e79e60f 100644
> > --- a/kernel/irq/manage.c
> > +++ b/kernel/irq/manage.c
> > @@ -1609,6 +1609,9 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler,
> >  	struct irq_desc *desc;
> >  	int retval;
> >  
> > +	if (irq == IRQ_NOTCONNECTED)
> > +		return -ENOTCONN;
> > +
> >  	/*
> >  	 * Sanity-check: shared interrupts must pass in a real dev-ID,
> >  	 * otherwise we'll have trouble later trying to figure out
> > @@ -1699,9 +1702,13 @@ EXPORT_SYMBOL(request_threaded_irq);
> >  int request_any_context_irq(unsigned int irq, irq_handler_t handler,
> >  			    unsigned long flags, const char *name, void *dev_id)
> >  {
> > -	struct irq_desc *desc = irq_to_desc(irq);
> > +	struct irq_desc *desc;
> >  	int ret;
> >  
> > +	if (irq == IRQ_NOTCONNECTED)
> > +		return -ENOTCONN;
> > +
> > +	desc = irq_to_desc(irq);
> >  	if (!desc)
> >  		return -EINVAL;
> >  
> > 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Problems since commit Recognize that Interrupt Line 255 means "not connected"

[Rafael J. Wysocki]

On Tue, Feb 9, 2016 at 5:44 PM, Bjorn Helgaas <helgaas@kernel.org> wrote:
> On Sat, Feb 06, 2016 at 04:43:14PM +0100, Heiner Kallweit wrote:
>> Am 06.02.2016 um 16:19 schrieb Bjorn Helgaas:
>> > On Sat, Feb 06, 2016 at 09:09:47AM +0100, Heiner Kallweit wrote:
>> >> Am 06.02.2016 um 00:37 schrieb Rafael J. Wysocki:
>> >>> On Saturday, February 06, 2016 12:00:32 AM Heiner Kallweit wrote:
>> >>>> Since commit a44c386a361e "x86/PCI/ACPI: Recognize that Interrupt Line 255
>> >>>> means "not connected"" I get several "PCI INT not connected" warnings on
>> >>>> a Zotac CI321 and EHCI failes to load:
>> >>>
>> >>> That doesn't follow clearly from your report, but I'm assuming that it works
>> >>> correctly without that commit, right?
>> >>>
>> >> Right, w/o this commit it looks like this:
>> >>
>> >> dmesg
>> >> ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000
>> >>
>> >> /proc/interrupts
>> >> IO-APIC  23-fasteoi   ehci_hcd:usb3
>> >
>> > Thanks a lot for your report!  This is a bit of a minefield, and I was
>> > worried that we'd trip over something with a44c386a361e.
>> >
>> > Oops, I think I see a problem with a44c386a361e.  We're checking for
>> > Interrupt Line == 255 even before we try to look it up in the _PRT.  I
>> > think we should only check Interrupt Line *after* everything else has
>> > failed.  Can you try the patch below instead of a44c386a361e?
>> >
>> With the attached patch everything is fine. No warnings and EHCI loads properly.
>
> Great, thanks a lot for testing this!
>
> Chen, will you update and repost your patch?  I know Rafael already
> had it on a branch, but I think he dropped it, so we need to get the
> update merged somehow.

I'd prefer a new updated patch if that's possible.

Thanks,
Rafael

Re: Problems since commit Recognize that Interrupt Line 255 means "not connected"

[Chen Fan]

On 02/10/2016 03:24 AM, Rafael J. Wysocki wrote:
> On Tue, Feb 9, 2016 at 5:44 PM, Bjorn Helgaas <helgaas@kernel.org> wrote:
>> On Sat, Feb 06, 2016 at 04:43:14PM +0100, Heiner Kallweit wrote:
>>> Am 06.02.2016 um 16:19 schrieb Bjorn Helgaas:
>>>> On Sat, Feb 06, 2016 at 09:09:47AM +0100, Heiner Kallweit wrote:
>>>>> Am 06.02.2016 um 00:37 schrieb Rafael J. Wysocki:
>>>>>> On Saturday, February 06, 2016 12:00:32 AM Heiner Kallweit wrote:
>>>>>>> Since commit a44c386a361e "x86/PCI/ACPI: Recognize that Interrupt Line 255
>>>>>>> means "not connected"" I get several "PCI INT not connected" warnings on
>>>>>>> a Zotac CI321 and EHCI failes to load:
>>>>>> That doesn't follow clearly from your report, but I'm assuming that it works
>>>>>> correctly without that commit, right?
>>>>>>
>>>>> Right, w/o this commit it looks like this:
>>>>>
>>>>> dmesg
>>>>> ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000
>>>>>
>>>>> /proc/interrupts
>>>>> IO-APIC  23-fasteoi   ehci_hcd:usb3
>>>> Thanks a lot for your report!  This is a bit of a minefield, and I was
>>>> worried that we'd trip over something with a44c386a361e.
>>>>
>>>> Oops, I think I see a problem with a44c386a361e.  We're checking for
>>>> Interrupt Line == 255 even before we try to look it up in the _PRT.  I
>>>> think we should only check Interrupt Line *after* everything else has
>>>> failed.  Can you try the patch below instead of a44c386a361e?
>>>>
>>> With the attached patch everything is fine. No warnings and EHCI loads properly.
>> Great, thanks a lot for testing this!
>>
>> Chen, will you update and repost your patch?  I know Rafael already
>> had it on a branch, but I think he dropped it, so we need to get the
>> update merged somehow.
> I'd prefer a new updated patch if that's possible.
patch is coming soon, thank all of your help.

Chen
>
> Thanks,
> Rafael
>
>
>