From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-acpi-owner@vger.kernel.org>
Message-ID: <570C4034.20105@caviumnetworks.com>
Date: Mon, 11 Apr 2016 17:24:20 -0700
From: David Daney <ddaney@caviumnetworks.com>
MIME-Version: 1.0
To: Jayachandran C <jchandra@broadcom.com>
CC: Bjorn Helgaas <helgaas@kernel.org>,
	Tomasz Nowicki <tn@semihalf.com>, <rafael@kernel.org>,
	Arnd Bergmann <arnd@arndb.de>,
	Will Deacon <will.deacon@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Hanjun Guo <hanjun.guo@linaro.org>,
	Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>,
	<okaya@codeaurora.org>, <jiang.liu@linux.intel.com>,
	Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>,
	<robert.richter@caviumnetworks.com>,
	Marcin Wojtas <mw@semihalf.com>, <Liviu.Dudau@arm.com>,
	<wangyijing@huawei.com>, <Suravee.Suthikulpanit@amd.com>,
	<msalter@redhat.com>, <linux-pci@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-acpi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linaro-acpi@lists.linaro.org>, Jon Masters <jcm@redhat.com>
Subject: Re: [PATCH v2 2/4] PCI: Provide common functions for ECAM mapping
References: <1460414707-19153-1-git-send-email-jchandra@broadcom.com> <1460414707-19153-3-git-send-email-jchandra@broadcom.com>
In-Reply-To: <1460414707-19153-3-git-send-email-jchandra@broadcom.com>
Content-Type: text/plain; charset="ISO-8859-1"; format=flowed
Sender: linux-acpi-owner@vger.kernel.org
List-ID: <linux-pci.vger.kernel.org>

On 04/11/2016 03:45 PM, Jayachandran C wrote:
> Add config option PCI_GENERIC_ECAM and file drivers/pci/ecam.c to
> provide generic functions for accessing memory mapped PCI config space.
>
> The API is defined in drivers/pci/ecam.h and is written to replace the
> API in drivers/pci/host/pci-host-common.h. The file defines a new
> 'struct pci_config_window' to hold the information related to a PCI
> config area and its mapping. This structure is expected to be used as
> sysdata for controllers that have ECAM based mapping.
>
> Helper functions are provided to setup the mapping, free the mapping
> and to implement the map_bus method in 'struct pci_ops'
>
> Signed-off-by: Jayachandran C <jchandra@broadcom.com>

Tested-by: David Daney <david.daney@cavium.com>


> ---
>   drivers/pci/Kconfig  |   3 ++
>   drivers/pci/Makefile |   2 +
>   drivers/pci/ecam.c   | 130 +++++++++++++++++++++++++++++++++++++++++++++++++++
>   drivers/pci/ecam.h   |  58 +++++++++++++++++++++++

I wonder if these files should go in drivers/pci/host ...  I understand 
that you still have to use them from drivers/pci/acpi though.

I will let others opine on this, but could you put the contents of 
ecam.h into include/linux/pci.h along with the  pci_generic_config_*() 
declarations?

If you did that, the contents of ecam.c could  go into 
drivers/pci/access.c...


>   4 files changed, 193 insertions(+)
>   create mode 100644 drivers/pci/ecam.c
>   create mode 100644 drivers/pci/ecam.h
>
[...]