linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>, Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: PCIe MSI address is not written at pci_enable_msi_range call
Date: Tue, 12 Jul 2016 15:28:21 +0100	[thread overview]
Message-ID: <5784FE85.1010301@arm.com> (raw)
In-Reply-To: <8520D5D51A55D047800579B094147198258B861F@XAP-PVEXMBX01.xlnx.xilinx.com>

On 12/07/16 10:11, Bharat Kumar Gogada wrote:
>> Subject: Re: PCIe MSI address is not written at pci_enable_msi_range call
>>
>> On 11/07/16 11:51, Bharat Kumar Gogada wrote:
>>>>> Hi Marc,
>>>>>
>>>>> Thanks for the reply.
>>>>>
>>>>> From PCIe Spec:
>>>>> MSI Enable Bit:
>>>>> If 1 and the MSI-X Enable bit in the MSI-X Message Control register
>>>>> (see Section 6.8.2.3) is 0, the function is permitted to use MSI to
>>>>> request service and is prohibited from using its INTx# pin.
>>>>>
>>>>> From Endpoint perspective, MSI Enable = 1 indicates MSI can be used
>>>> which means MSI address and data fields are available/programmed.
>>>>>
>>>>> In our SoC whenever MSI Enable goes from 0 --> 1 the hardware
>>>>> latches
>>>> onto MSI address and MSI data values.
>>>>>
>>>>> With current MSI implementation in kernel, our SoC is latching on to
>>>> incorrect address and data values, as address/data
>>>>> are updated much later than MSI Enable bit.
>>>>
>>>> Interesting. It looks like we're doing something wrong in the MSI flow.
>>>> Can you confirm that this is limited to MSI and doesn't affect MSI-X?
>>>>
>>> I think it's the same issue irrespective of MSI or MSI-X as we are
>>> enabling these interrupts before providing the  vectors.
>>>
>>> So we always have a hole when MSI/MSI-X is 1, and software driver has
>>> not registered the irq, and End Point may raise an interrupt (may be
>>> due to error) in this point of time.
>>
>> Looking at the MSI-X part of the code, there is this:
>>
>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/pci
>> /msi.c#n764
>>
>> which hints that it may not be possible to do otherwise. Damned if you do,
>> damned if you don't.
>>
> MSI-X might not have problem then, how to resolve the issue with MSI ?

Can you give this patch a go and let me know if that works for you?

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index a080f44..565e2a4 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1277,6 +1277,8 @@ struct irq_domain *pci_msi_create_irq_domain(struct fwnode_handle *fwnode,
 	if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS)
 		pci_msi_domain_update_chip_ops(info);
 
+	info->flags |= MSI_FLAG_ACTIVATE_EARLY;
+
 	domain = msi_create_irq_domain(fwnode, info, parent);
 	if (!domain)
 		return NULL;
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 8b425c6..513b7c7 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -270,6 +270,8 @@ enum {
 	MSI_FLAG_MULTI_PCI_MSI		= (1 << 3),
 	/* Support PCI MSIX interrupts */
 	MSI_FLAG_PCI_MSIX		= (1 << 4),
+	/* Needs early activate, required for PCI */
+	MSI_FLAG_ACTIVATE_EARLY		= (1 << 5),
 };
 
 int msi_domain_set_affinity(struct irq_data *data, const struct cpumask *mask,
diff --git a/kernel/irq/msi.c b/kernel/irq/msi.c
index 38e89ce..4ed2cca 100644
--- a/kernel/irq/msi.c
+++ b/kernel/irq/msi.c
@@ -361,6 +361,13 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev,
 		else
 			dev_dbg(dev, "irq [%d-%d] for MSI\n",
 				virq, virq + desc->nvec_used - 1);
+
+		if (info->flags & MSI_FLAG_ACTIVATE_EARLY) {
+			struct irq_data *irq_data;
+
+			irq_data = irq_domain_get_irq_data(domain, desc->irq);
+			irq_domain_activate_irq(irq_data);
+		}
 	}
 
 	return 0;


Thanks,

	M.

-- 
Jazz is not dead. It just smells funny...

  reply	other threads:[~2016-07-12 14:28 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-11  2:32 PCIe MSI address is not written at pci_enable_msi_range call Bharat Kumar Gogada
2016-07-11  8:47 ` Marc Zyngier
2016-07-11  9:33   ` Bharat Kumar Gogada
2016-07-11 10:21     ` Marc Zyngier
2016-07-11 10:51       ` Bharat Kumar Gogada
2016-07-11 15:50         ` Marc Zyngier
2016-07-12  9:11           ` Bharat Kumar Gogada
2016-07-12 14:28             ` Marc Zyngier [this message]
2016-07-12 15:56     ` Marc Zyngier
2016-07-13  6:22       ` Bharat Kumar Gogada
2016-07-13  8:16         ` Marc Zyngier
2016-07-13  8:33           ` Bharat Kumar Gogada
2016-07-13  8:37             ` Marc Zyngier
2016-07-13  9:10               ` Bharat Kumar Gogada
2016-07-13  9:19                 ` Marc Zyngier
2016-07-13  9:36                   ` Bharat Kumar Gogada
2016-07-13  9:40                     ` Marc Zyngier
2016-07-13 15:34                       ` Bharat Kumar Gogada
2016-07-13 15:39                         ` Marc Zyngier
2016-07-20 12:19             ` Marc Zyngier
2016-07-27 11:14               ` Bharat Kumar Gogada
  -- strict thread matches above, loose matches on Subject: below --
2016-07-11  2:37 Bharat Kumar Gogada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5784FE85.1010301@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=arnd@arndb.de \
    --cc=bharat.kumar.gogada@xilinx.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).