From: "Limonciello, Mario" <mario.limonciello@amd.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
Bjorn Helgaas <helgaas@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org
Subject: Re: [PATCH v2] PCI: Call _REG when saving/restoring PCI state
Date: Tue, 6 Jun 2023 13:26:33 -0500 [thread overview]
Message-ID: <598b2c2d-bfb2-da5d-f8cc-7aa1fac4c410@amd.com> (raw)
In-Reply-To: <CAJZ5v0gzfCXmPm7Jckt02FF_PJY8VJPPUeoE0gb8twbP+M8CxA@mail.gmail.com>
On 6/6/2023 1:21 PM, Rafael J. Wysocki wrote:
> On Tue, Jun 6, 2023 at 6:23 PM Mario Limonciello
> <mario.limonciello@amd.com> wrote:
>> ASMedia PCIe GPIO controllers fail functional tests after returning from
>> suspend (S3 or s2idle). This is because the BIOS checks whether the
>> OSPM has called the `_REG` method to determine whether it can interact with
>> the OperationRegion assigned to the device.
>>
>> As described in 6.5.4 in the APCI spec, `_REG` is used to inform the AML
>> code on the availability of an operation region.
>>
>> To fix this issue, call acpi_evaluate_reg() when saving and restoring the
>> state of PCI devices.
>>
>> Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html#reg-region
>> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
>> ---
>> v1->v2:
>> * Handle case of no CONFIG_ACPI
>> * Rename function
>> * Update commit message
>> * Move ACPI calling code into pci-acpi.c instead
>> * Cite the ACPI spec
>> ---
>> drivers/pci/pci-acpi.c | 10 ++++++++++
>> drivers/pci/pci.c | 14 ++++++++++++++
>> drivers/pci/pci.h | 2 ++
>> 3 files changed, 26 insertions(+)
>>
>> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
>> index 1698205dd73c..abc8bcfc2c71 100644
>> --- a/drivers/pci/pci-acpi.c
>> +++ b/drivers/pci/pci-acpi.c
>> @@ -1209,6 +1209,16 @@ void acpi_pci_remove_bus(struct pci_bus *bus)
>> acpi_pci_slot_remove(bus);
>> }
>>
>> +void acpi_pci_set_register_access(struct pci_dev *dev, bool enable)
>> +{
>> + int val = enable ? ACPI_REG_CONNECT : ACPI_REG_DISCONNECT;
>> + int ret = acpi_evaluate_reg(ACPI_HANDLE(&dev->dev),
>> + ACPI_ADR_SPACE_PCI_CONFIG, val);
>> + if (ret)
>> + pci_dbg(dev, "ACPI _REG %s evaluation failed (%d)\n",
>> + val ? "connect" : "disconnect", ret);
> s/val/enable/ ?
> Then I don't have to remember that ACPI_REG_DISCONNECT is 0.
Sure, no problem.
>
> <bikeshedding>
>
> I would call this function something like
> acpi_pci_config_space_access(), because technically it is about
> allowing AML to access the PCI configuration space.
>
> </bikeshedding>
Presumably platform_pci_config_space_access() below too.
That's fine by me, Bjorn?
>> +}
>> +
>> /* ACPI bus type */
>>
>>
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index e38c2f6eebd4..b2f1f603ec62 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -1068,6 +1068,14 @@ static inline bool platform_pci_bridge_d3(struct pci_dev *dev)
>> return acpi_pci_bridge_d3(dev);
>> }
>>
>> +static inline void platform_set_register_access(struct pci_dev *dev, bool en)
>> +{
>> + if (pci_use_mid_pm())
>> + return;
>> +
>> + acpi_pci_set_register_access(dev, en);
>> +}
>> +
>> /**
>> * pci_update_current_state - Read power state of given device and cache it
>> * @dev: PCI device to handle.
>> @@ -1645,6 +1653,9 @@ static void pci_restore_ltr_state(struct pci_dev *dev)
>> int pci_save_state(struct pci_dev *dev)
>> {
>> int i;
>> +
>> + platform_set_register_access(dev, false);
>> +
>> /* XXX: 100% dword access ok here? */
>> for (i = 0; i < 16; i++) {
>> pci_read_config_dword(dev, i * 4, &dev->saved_config_space[i]);
>> @@ -1790,6 +1801,8 @@ void pci_restore_state(struct pci_dev *dev)
>> pci_enable_acs(dev);
>> pci_restore_iov_state(dev);
>>
>> + platform_set_register_access(dev, true);
>> +
>> dev->state_saved = false;
>> }
>> EXPORT_SYMBOL(pci_restore_state);
>> @@ -3203,6 +3216,7 @@ void pci_pm_init(struct pci_dev *dev)
>> pci_read_config_word(dev, PCI_STATUS, &status);
>> if (status & PCI_STATUS_IMM_READY)
>> dev->imm_ready = 1;
>> + platform_set_register_access(dev, true);
>> }
>>
>> static unsigned long pci_ea_flags(struct pci_dev *dev, u8 prop)
>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>> index ffccb03933e2..78961505aae2 100644
>> --- a/drivers/pci/pci.h
>> +++ b/drivers/pci/pci.h
>> @@ -703,6 +703,7 @@ void acpi_pci_refresh_power_state(struct pci_dev *dev);
>> int acpi_pci_wakeup(struct pci_dev *dev, bool enable);
>> bool acpi_pci_need_resume(struct pci_dev *dev);
>> pci_power_t acpi_pci_choose_state(struct pci_dev *pdev);
>> +void acpi_pci_set_register_access(struct pci_dev *dev, bool enable);
>> #else
>> static inline int pci_dev_acpi_reset(struct pci_dev *dev, bool probe)
>> {
>> @@ -742,6 +743,7 @@ static inline pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
>> {
>> return PCI_POWER_ERROR;
>> }
>> +static inline void acpi_pci_set_register_access(struct pci_dev *dev, bool enable) {}
>> #endif
>>
>> #ifdef CONFIG_PCIEASPM
>> --
>> 2.34.1
>>
next prev parent reply other threads:[~2023-06-06 18:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-06 16:23 [PATCH v2] PCI: Call _REG when saving/restoring PCI state Mario Limonciello
2023-06-06 18:21 ` Rafael J. Wysocki
2023-06-06 18:26 ` Limonciello, Mario [this message]
2023-06-06 19:23 ` Bjorn Helgaas
2023-06-06 19:40 ` Limonciello, Mario
2023-06-06 19:58 ` Bjorn Helgaas
2023-06-06 20:26 ` Limonciello, Mario
2023-06-07 11:17 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=598b2c2d-bfb2-da5d-f8cc-7aa1fac4c410@amd.com \
--to=mario.limonciello@amd.com \
--cc=helgaas@kernel.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox