From: Zhou Wang <wangzhou1@hisilicon.com>
To: Rob Herring <robh@kernel.org>, <linux-pci@vger.kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [PATCH] PCI: dwc: hisi: Remove non-ECAM HiSilicon hip05/hip06 driver
Date: Mon, 27 Jul 2020 20:05:03 +0800 [thread overview]
Message-ID: <5F1EC2EF.1030307@hisilicon.com> (raw)
In-Reply-To: <20200724224204.3249055-1-robh@kernel.org>
On 2020/7/25 6:42, Rob Herring wrote:
> The HiSilicon non-ECAM PCIe has been broken since March 2016 commit
> 7e57fd1444bf ("PCI: designware: Move Root Complex setup code to
> dw_pcie_setup_rc()"). The reason is this commit moved the iATU setup code
> from dw_pcie_host_init() to dw_pcie_setup_rc(), but the hisi driver never
> calls dw_pcie_setup_rc(). The result is the PCI memory space is never
> configured and the driver can't work. It's also clear it has an iATU as
> the config space accesses use it.
>
> There's also no dts file using either "hisilicon,hip05-pcie" or
> "hisilicon,hip06-pcie".
We can remove "hisilicon,hip05-pcie"/"hisilicon,hip06-pcie" related codes.
Currently we use "hisilicon,hip0x-pcie-ecam" codes as driver in device tree,
and use hisi_pcie_ops as a quirk in ACPI PCI.
Thanks and best,
Zhou
>
> Cc: Zhou Wang <wangzhou1@hisilicon.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> drivers/pci/controller/dwc/pcie-hisi.c | 219 -------------------------
> 1 file changed, 219 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-hisi.c b/drivers/pci/controller/dwc/pcie-hisi.c
> index 0ad4e07dd4c2..5ca86796d43a 100644
> --- a/drivers/pci/controller/dwc/pcie-hisi.c
> +++ b/drivers/pci/controller/dwc/pcie-hisi.c
> @@ -10,15 +10,10 @@
> */
> #include <linux/interrupt.h>
> #include <linux/init.h>
> -#include <linux/mfd/syscon.h>
> -#include <linux/of_address.h>
> -#include <linux/of_pci.h>
> #include <linux/platform_device.h>
> -#include <linux/of_device.h>
> #include <linux/pci.h>
> #include <linux/pci-acpi.h>
> #include <linux/pci-ecam.h>
> -#include <linux/regmap.h>
> #include "../../pci.h"
>
> #if defined(CONFIG_PCI_HISI) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
> @@ -118,220 +113,6 @@ const struct pci_ecam_ops hisi_pcie_ops = {
>
> #ifdef CONFIG_PCI_HISI
>
> -#include "pcie-designware.h"
> -
> -#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818
> -#define PCIE_HIP06_CTRL_OFF 0x1000
> -#define PCIE_SYS_STATE4 (PCIE_HIP06_CTRL_OFF + 0x31c)
> -#define PCIE_LTSSM_LINKUP_STATE 0x11
> -#define PCIE_LTSSM_STATE_MASK 0x3F
> -
> -#define to_hisi_pcie(x) dev_get_drvdata((x)->dev)
> -
> -struct hisi_pcie;
> -
> -struct pcie_soc_ops {
> - int (*hisi_pcie_link_up)(struct hisi_pcie *hisi_pcie);
> -};
> -
> -struct hisi_pcie {
> - struct dw_pcie *pci;
> - struct regmap *subctrl;
> - u32 port_id;
> - const struct pcie_soc_ops *soc_ops;
> -};
> -
> -/* HipXX PCIe host only supports 32-bit config access */
> -static int hisi_pcie_cfg_read(struct pcie_port *pp, int where, int size,
> - u32 *val)
> -{
> - u32 reg;
> - u32 reg_val;
> - void *walker = ®_val;
> - struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> -
> - walker += (where & 0x3);
> - reg = where & ~0x3;
> - reg_val = dw_pcie_readl_dbi(pci, reg);
> -
> - if (size == 1)
> - *val = *(u8 __force *) walker;
> - else if (size == 2)
> - *val = *(u16 __force *) walker;
> - else if (size == 4)
> - *val = reg_val;
> - else
> - return PCIBIOS_BAD_REGISTER_NUMBER;
> -
> - return PCIBIOS_SUCCESSFUL;
> -}
> -
> -/* HipXX PCIe host only supports 32-bit config access */
> -static int hisi_pcie_cfg_write(struct pcie_port *pp, int where, int size,
> - u32 val)
> -{
> - u32 reg_val;
> - u32 reg;
> - void *walker = ®_val;
> - struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> -
> - walker += (where & 0x3);
> - reg = where & ~0x3;
> - if (size == 4)
> - dw_pcie_writel_dbi(pci, reg, val);
> - else if (size == 2) {
> - reg_val = dw_pcie_readl_dbi(pci, reg);
> - *(u16 __force *) walker = val;
> - dw_pcie_writel_dbi(pci, reg, reg_val);
> - } else if (size == 1) {
> - reg_val = dw_pcie_readl_dbi(pci, reg);
> - *(u8 __force *) walker = val;
> - dw_pcie_writel_dbi(pci, reg, reg_val);
> - } else
> - return PCIBIOS_BAD_REGISTER_NUMBER;
> -
> - return PCIBIOS_SUCCESSFUL;
> -}
> -
> -static int hisi_pcie_link_up_hip05(struct hisi_pcie *hisi_pcie)
> -{
> - u32 val;
> -
> - regmap_read(hisi_pcie->subctrl, PCIE_SUBCTRL_SYS_STATE4_REG +
> - 0x100 * hisi_pcie->port_id, &val);
> -
> - return ((val & PCIE_LTSSM_STATE_MASK) == PCIE_LTSSM_LINKUP_STATE);
> -}
> -
> -static int hisi_pcie_link_up_hip06(struct hisi_pcie *hisi_pcie)
> -{
> - struct dw_pcie *pci = hisi_pcie->pci;
> - u32 val;
> -
> - val = dw_pcie_readl_dbi(pci, PCIE_SYS_STATE4);
> -
> - return ((val & PCIE_LTSSM_STATE_MASK) == PCIE_LTSSM_LINKUP_STATE);
> -}
> -
> -static int hisi_pcie_link_up(struct dw_pcie *pci)
> -{
> - struct hisi_pcie *hisi_pcie = to_hisi_pcie(pci);
> -
> - return hisi_pcie->soc_ops->hisi_pcie_link_up(hisi_pcie);
> -}
> -
> -static const struct dw_pcie_host_ops hisi_pcie_host_ops = {
> - .rd_own_conf = hisi_pcie_cfg_read,
> - .wr_own_conf = hisi_pcie_cfg_write,
> -};
> -
> -static int hisi_add_pcie_port(struct hisi_pcie *hisi_pcie,
> - struct platform_device *pdev)
> -{
> - struct dw_pcie *pci = hisi_pcie->pci;
> - struct pcie_port *pp = &pci->pp;
> - struct device *dev = &pdev->dev;
> - int ret;
> - u32 port_id;
> -
> - if (of_property_read_u32(dev->of_node, "port-id", &port_id)) {
> - dev_err(dev, "failed to read port-id\n");
> - return -EINVAL;
> - }
> - if (port_id > 3) {
> - dev_err(dev, "Invalid port-id: %d\n", port_id);
> - return -EINVAL;
> - }
> - hisi_pcie->port_id = port_id;
> -
> - pp->ops = &hisi_pcie_host_ops;
> -
> - ret = dw_pcie_host_init(pp);
> - if (ret) {
> - dev_err(dev, "failed to initialize host\n");
> - return ret;
> - }
> -
> - return 0;
> -}
> -
> -static const struct dw_pcie_ops dw_pcie_ops = {
> - .link_up = hisi_pcie_link_up,
> -};
> -
> -static int hisi_pcie_probe(struct platform_device *pdev)
> -{
> - struct device *dev = &pdev->dev;
> - struct dw_pcie *pci;
> - struct hisi_pcie *hisi_pcie;
> - struct resource *reg;
> - int ret;
> -
> - hisi_pcie = devm_kzalloc(dev, sizeof(*hisi_pcie), GFP_KERNEL);
> - if (!hisi_pcie)
> - return -ENOMEM;
> -
> - pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> - if (!pci)
> - return -ENOMEM;
> -
> - pci->dev = dev;
> - pci->ops = &dw_pcie_ops;
> -
> - hisi_pcie->pci = pci;
> -
> - hisi_pcie->soc_ops = of_device_get_match_data(dev);
> -
> - hisi_pcie->subctrl =
> - syscon_regmap_lookup_by_compatible("hisilicon,pcie-sas-subctrl");
> - if (IS_ERR(hisi_pcie->subctrl)) {
> - dev_err(dev, "cannot get subctrl base\n");
> - return PTR_ERR(hisi_pcie->subctrl);
> - }
> -
> - reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc_dbi");
> - pci->dbi_base = devm_pci_remap_cfg_resource(dev, reg);
> - if (IS_ERR(pci->dbi_base))
> - return PTR_ERR(pci->dbi_base);
> - platform_set_drvdata(pdev, hisi_pcie);
> -
> - ret = hisi_add_pcie_port(hisi_pcie, pdev);
> - if (ret)
> - return ret;
> -
> - return 0;
> -}
> -
> -static struct pcie_soc_ops hip05_ops = {
> - &hisi_pcie_link_up_hip05
> -};
> -
> -static struct pcie_soc_ops hip06_ops = {
> - &hisi_pcie_link_up_hip06
> -};
> -
> -static const struct of_device_id hisi_pcie_of_match[] = {
> - {
> - .compatible = "hisilicon,hip05-pcie",
> - .data = (void *) &hip05_ops,
> - },
> - {
> - .compatible = "hisilicon,hip06-pcie",
> - .data = (void *) &hip06_ops,
> - },
> - {},
> -};
> -
> -static struct platform_driver hisi_pcie_driver = {
> - .probe = hisi_pcie_probe,
> - .driver = {
> - .name = "hisi-pcie",
> - .of_match_table = hisi_pcie_of_match,
> - .suppress_bind_attrs = true,
> - },
> -};
> -builtin_platform_driver(hisi_pcie_driver);
> -
> static int hisi_pcie_platform_init(struct pci_config_window *cfg)
> {
> struct device *dev = cfg->parent;
>
next prev parent reply other threads:[~2020-07-27 12:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-24 22:42 [PATCH] PCI: dwc: hisi: Remove non-ECAM HiSilicon hip05/hip06 driver Rob Herring
2020-07-27 12:05 ` Zhou Wang [this message]
2020-07-27 16:09 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5F1EC2EF.1030307@hisilicon.com \
--to=wangzhou1@hisilicon.com \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox