linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Richard Zhu <hongxing.zhu@nxp.com>,
	bhelgaas@google.com, lorenzo.pieralisi@arm.com
Cc: linux-pci@vger.kernel.org, linux-imx@nxp.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de
Subject: Re: [RESEND v2 2/5] PCI: imx6: Add the error propagation from host_init
Date: Fri, 15 Oct 2021 20:16:13 +0200	[thread overview]
Message-ID: <6c2cd328dfd407002339d1c83ebd5b832d4f377d.camel@pengutronix.de> (raw)
In-Reply-To: <1634277941-6672-3-git-send-email-hongxing.zhu@nxp.com>

Am Freitag, dem 15.10.2021 um 14:05 +0800 schrieb Richard Zhu:
> Since there is error return check of the host_init callback, add error
> check to imx6_pcie_deassert_core_reset() function, and change the
> function type accordingly.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 24 ++++++++++++++++--------
>  1 file changed, 16 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 1fa1dba6da81..3372775834a2 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -527,24 +527,24 @@ static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
>  		dev_err(dev, "PCIe PLL lock timeout\n");
>  }
>  
> -static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> +static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  {
>  	struct dw_pcie *pci = imx6_pcie->pci;
>  	struct device *dev = pci->dev;
> -	int ret;
> +	int ret, err;
>  
>  	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
>  		ret = regulator_enable(imx6_pcie->vpcie);
>  		if (ret) {
>  			dev_err(dev, "failed to enable vpcie regulator: %d\n",
>  				ret);
> -			return;
> +			return ret;
>  		}
>  	}
>  
> -	ret = imx6_pcie_clk_enable(imx6_pcie);
> -	if (ret) {
> -		dev_err(dev, "unable to enable pcie clocks\n");
> +	err = imx6_pcie_clk_enable(imx6_pcie);
> +	if (err) {
> +		dev_err(dev, "unable to enable pcie clocks: %d\n", err);
>  		goto err_clks;
>  	}
>  
> @@ -599,7 +599,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  		break;
>  	}
>  
> -	return;
> +	return 0;
>  
>  err_clks:
>  	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> @@ -608,6 +608,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  			dev_err(dev, "failed to disable vpcie regulator: %d\n",
>  				ret);
>  	}
> +	return err;
>  }
>  
>  static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> @@ -858,11 +859,18 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  static int imx6_pcie_host_init(struct pcie_port *pp)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct device *dev = pci->dev;
>  	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
> +	int ret;
>  
>  	imx6_pcie_assert_core_reset(imx6_pcie);
>  	imx6_pcie_init_phy(imx6_pcie);
> -	imx6_pcie_deassert_core_reset(imx6_pcie);
> +	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
> +	if (ret < 0) {
> +		dev_err(dev, "pcie host init failed: %d.\n", ret);
> +		return ret;
> +	}
> +
>  	imx6_setup_phy_mpll(imx6_pcie);
>  
>  	return 0;



  reply	other threads:[~2021-10-15 18:16 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-15  6:05 [RESEND v2 0/5] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2021-10-15  6:05 ` [RESEND v2 1/5] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2021-10-15 18:13   ` Lucas Stach
2021-10-19  7:32     ` Richard Zhu
2021-10-15  6:05 ` [RESEND v2 2/5] PCI: imx6: Add the error propagation from host_init Richard Zhu
2021-10-15 18:16   ` Lucas Stach [this message]
2021-10-19  7:33     ` Richard Zhu
2021-10-15  6:05 ` [RESEND v2 3/5] PCI: imx6: Fix the regulator dump when link never came up Richard Zhu
2021-10-15 18:22   ` Lucas Stach
2021-10-19  7:39     ` Richard Zhu
2021-10-20  3:22       ` Richard Zhu
2021-10-15 18:34   ` Fabio Estevam
2021-10-19  7:44     ` Richard Zhu
2021-10-15  6:05 ` [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling unbalance " Richard Zhu
2021-10-15 18:24   ` Lucas Stach
2021-10-19  7:43     ` Richard Zhu
2021-10-15 18:49   ` Bjorn Helgaas
2021-10-15 18:51     ` Bjorn Helgaas
2021-10-19  7:56       ` Richard Zhu
2021-10-22  8:02         ` Richard Zhu
2021-10-23  9:53           ` Krzysztof Wilczyński
2021-10-25  2:35             ` Richard Zhu
2021-10-26 22:21               ` Bjorn Helgaas
2021-10-27  1:30                 ` Richard Zhu
2021-10-26 16:38           ` Bjorn Helgaas
2021-10-27  1:29             ` Richard Zhu
2021-10-19  7:45     ` Richard Zhu
2021-10-15  6:05 ` [RESEND v2 5/5] PCI: imx6: Add the compliance tests mode support Richard Zhu
2021-10-15 18:28   ` Lucas Stach
2021-10-19  8:12     ` Richard Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6c2cd328dfd407002339d1c83ebd5b832d4f377d.camel@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=bhelgaas@google.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).