Re: [PATCH 1/3] dt-bindings: PCI: qcom: Move phy, wake & reset gpio's to root port

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

On 3/24/2025 10:09 PM, Rob Herring wrote:
> On Sat, Mar 22, 2025 at 08:30:43AM +0530, Krishna Chaitanya Chundru wrote:
>> Move the phy, phy-names, wake-gpio's to the pcie root port node instead of
>> the bridge node, as agreed upon in multiple places one instance is[1].
> 
> You aren't really moving them except in the example. This is an ABI
> break for sc7280. Is anyone going to care?
> 
> You need to deprecate the properties in the old location.
>
Hi Rob,

we are actually moving these properties in the driver also
patch 3 
https://lore.kernel.org/linux-arm-msm/20250322-perst-v1-3-e5e4da74a204@oss.qualcomm.com/T/#m168bec3f5d218a7f0c18293ff7380cba07a12e0e
is the driver change in this series.

>> Update the qcom,pcie-common.yaml to include the phy, phy-names, and
>> wake-gpios properties in the root port node. There is already reset-gpio
>> defined for PERST# in pci-bus-common.yaml, start using that property
>> instead of perst-gpio.
>>
>> For backward compatibility, do not remove any existing properties in the
>> bridge node.
>>
>> [1] https://lore.kernel.org/linux-pci/20241211192014.GA3302752@bhelgaas/
>>
>> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
>> ---
>>   .../devicetree/bindings/pci/qcom,pcie-common.yaml  | 22 ++++++++++++++++++++++
>>   .../devicetree/bindings/pci/qcom,pcie-sc7280.yaml  | 18 ++++++++++++++----
>>   2 files changed, 36 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
>> index 0480c58f7d99..258c21c01c72 100644
>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
>> @@ -85,6 +85,28 @@ properties:
>>     opp-table:
>>       type: object
>>   
>> +patternProperties:
>> +  "^pcie@":
>> +    type: object
>> +    $ref: /schemas/pci/pci-pci-bridge.yaml#
>> +
>> +    properties:
>> +      reg:
>> +        maxItems: 1
>> +
>> +      phys:
>> +        maxItems: 1
>> +
>> +      phy-names:
>> +        items:
>> +          - const: pciephy
> 
> Just drop phy-names in the new location. It's pointless especially when
> foo-names is just "${module}foo".
ack

- Krishna Chaitanya.
> 
>> +
>> +      wake-gpios:
>> +        description: GPIO controlled connection to WAKE# signal
>> +        maxItems: 1
>> +
>> +    unevaluatedProperties: false
>> +
>>   required:
>>     - reg
>>     - reg-names