From: Joao Pinto <Joao.Pinto@synopsys.com>
To: Kishon Vijay Abraham I <kishon@ti.com>, <jingoohan1@gmail.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
Joao Pinto <Joao.Pinto@synopsys.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<nsekhar@ti.com>
Subject: Re: [PATCH v2] PCI: add a new directory for designware core
Date: Wed, 4 Jan 2017 16:51:37 +0000 [thread overview]
Message-ID: <802c0889-17ba-5fa9-a68b-ecbd0e198be5@synopsys.com> (raw)
In-Reply-To: <1483531695-9377-1-git-send-email-kishon@ti.com>
Hi Kishon,
Nice job! In my opinion, isolating dwc base drivers and cores in one dwc folder
will improve code organization now and in the future. By creating
pcie-designware-host and pcie-designware-endpoint cores will then add even more
readbility. I think this is a good work base for your future developments. Thanks!
Acked-By: Joao Pinto <jpinto@synopsys.com>
Às 12:08 PM de 1/4/2017, Kishon Vijay Abraham I escreveu:
> Group all the PCI drivers that use designware core in dwc directory.
> dwc IP is capable of operating in both host mode and device mode and
> keeping it inside the *host* directory is misleading.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> Changes from v1:
> *) instead of renaming *host* directory to *controller* directory,
> move all the dwc drivers to dwc/ directory.
> Next Steps:
> Split pcie-designware.c to core, host-only and endpoint-only files.
>
> drivers/pci/Kconfig | 1 +
> drivers/pci/Makefile | 3 +
> drivers/pci/dwc/Kconfig | 108 +++++++++++++++++++++
> drivers/pci/dwc/Makefile | 23 +++++
> drivers/pci/{host => dwc}/pci-dra7xx.c | 0
> drivers/pci/{host => dwc}/pci-exynos.c | 0
> drivers/pci/{host => dwc}/pci-imx6.c | 0
> drivers/pci/{host => dwc}/pci-keystone-dw.c | 0
> drivers/pci/{host => dwc}/pci-keystone.c | 0
> drivers/pci/{host => dwc}/pci-layerscape.c | 0
> drivers/pci/{host => dwc}/pcie-armada8k.c | 0
> drivers/pci/{host => dwc}/pcie-artpec6.c | 0
> drivers/pci/{host => dwc}/pcie-designware-plat.c | 0
> drivers/pci/{host => dwc}/pcie-designware.c | 0
> drivers/pci/{host => dwc}/pcie-designware.h | 0
> drivers/pci/{host => dwc}/pcie-hisi.c | 0
> drivers/pci/{host => dwc}/pcie-qcom.c | 0
> drivers/pci/{host => dwc}/pcie-spear13xx.c | 0
> drivers/pci/host/Kconfig | 113 ----------------------
> drivers/pci/host/Makefile | 12 ---
> 20 files changed, 135 insertions(+), 125 deletions(-)
> create mode 100644 drivers/pci/dwc/Kconfig
> create mode 100644 drivers/pci/dwc/Makefile
> rename drivers/pci/{host => dwc}/pci-dra7xx.c (100%)
> rename drivers/pci/{host => dwc}/pci-exynos.c (100%)
> rename drivers/pci/{host => dwc}/pci-imx6.c (100%)
> rename drivers/pci/{host => dwc}/pci-keystone-dw.c (100%)
> rename drivers/pci/{host => dwc}/pci-keystone.c (100%)
> rename drivers/pci/{host => dwc}/pci-layerscape.c (100%)
> rename drivers/pci/{host => dwc}/pcie-armada8k.c (100%)
> rename drivers/pci/{host => dwc}/pcie-artpec6.c (100%)
> rename drivers/pci/{host => dwc}/pcie-designware-plat.c (100%)
> rename drivers/pci/{host => dwc}/pcie-designware.c (100%)
> rename drivers/pci/{host => dwc}/pcie-designware.h (100%)
> rename drivers/pci/{host => dwc}/pcie-hisi.c (100%)
> rename drivers/pci/{host => dwc}/pcie-qcom.c (100%)
> rename drivers/pci/{host => dwc}/pcie-spear13xx.c (100%)
>
> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> index 6555eb7..df14142 100644
> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -132,4 +132,5 @@ config PCI_HYPERV
> PCI devices from a PCI backend to support PCI driver domains.
>
> source "drivers/pci/hotplug/Kconfig"
> +source "drivers/pci/dwc/Kconfig"
> source "drivers/pci/host/Kconfig"
> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index 8db5079..b7e9751 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -66,5 +66,8 @@ obj-$(CONFIG_OF) += of.o
>
> ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
>
> +# PCI dwc controller drivers
> +obj-y += dwc/
> +
> # PCI host controller drivers
> obj-y += host/
> diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
> new file mode 100644
> index 0000000..3144a06
> --- /dev/null
> +++ b/drivers/pci/dwc/Kconfig
> @@ -0,0 +1,108 @@
> +menuconfig PCIE_DW
> + bool "DesignWare PCI Core Support"
> + depends on PCI
> + depends on PCI_MSI_IRQ_DOMAIN
> + help
> + Say Y if your system has Designware PCI core
> +
> +if PCIE_DW
> +
> +config PCI_DRA7XX
> + bool "TI DRA7xx PCIe controller"
> + depends on OF && HAS_IOMEM && TI_PIPE3
> + depends on PCI_MSI_IRQ_DOMAIN
> + help
> + Enables support for the PCIe controller in the DRA7xx SoC. There
> + are two instances of PCIe controller in DRA7xx. This controller can
> + act both as EP and RC. This reuses the Designware core.
> +
> +config PCIE_DW_PLAT
> + bool "Platform bus based DesignWare PCIe Controller"
> + depends on PCI_MSI_IRQ_DOMAIN
> + ---help---
> + This selects the DesignWare PCIe controller support. Select this if
> + you have a PCIe controller on Platform bus.
> +
> + If you have a controller with this interface, say Y or M here.
> +
> + If unsure, say N.
> +
> +config PCI_EXYNOS
> + bool "Samsung Exynos PCIe controller"
> + depends on SOC_EXYNOS5440
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIEPORTBUS
> +
> +config PCI_IMX6
> + bool "Freescale i.MX6 PCIe controller"
> + depends on SOC_IMX6Q
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIEPORTBUS
> +
> +config PCIE_SPEAR13XX
> + bool "STMicroelectronics SPEAr PCIe controller"
> + depends on ARCH_SPEAR13XX
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIEPORTBUS
> + help
> + Say Y here if you want PCIe support on SPEAr13XX SoCs.
> +
> +config PCI_KEYSTONE
> + bool "TI Keystone PCIe controller"
> + depends on ARCH_KEYSTONE
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIEPORTBUS
> + help
> + Say Y here if you want to enable PCI controller support on Keystone
> + SoCs. The PCI controller on Keystone is based on Designware hardware
> + and therefore the driver re-uses the Designware core functions to
> + implement the driver.
> +
> +config PCI_LAYERSCAPE
> + bool "Freescale Layerscape PCIe controller"
> + depends on OF && (ARM || ARCH_LAYERSCAPE)
> + depends on PCI_MSI_IRQ_DOMAIN
> + select MFD_SYSCON
> + help
> + Say Y here if you want PCIe controller support on Layerscape SoCs.
> +
> +config PCI_HISI
> + depends on OF && ARM64
> + bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIEPORTBUS
> + help
> + Say Y here if you want PCIe controller support on HiSilicon
> + Hip05 and Hip06 SoCs
> +
> +config PCIE_QCOM
> + bool "Qualcomm PCIe controller"
> + depends on ARCH_QCOM && OF
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIEPORTBUS
> + help
> + Say Y here to enable PCIe controller support on Qualcomm SoCs. The
> + PCIe controller uses the Designware core plus Qualcomm-specific
> + hardware wrappers.
> +
> +config PCIE_ARMADA_8K
> + bool "Marvell Armada-8K PCIe controller"
> + depends on ARCH_MVEBU
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIEPORTBUS
> + help
> + Say Y here if you want to enable PCIe controller support on
> + Armada-8K SoCs. The PCIe controller on Armada-8K is based on
> + Designware hardware and therefore the driver re-uses the
> + Designware core functions to implement the driver.
> +
> +config PCIE_ARTPEC6
> + bool "Axis ARTPEC-6 PCIe controller"
> + depends on MACH_ARTPEC6
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIEPORTBUS
> + help
> + Say Y here to enable PCIe controller support on Axis ARTPEC-6
> + SoCs. This PCIe controller uses the DesignWare core.
> +
> +endif
> diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
> new file mode 100644
> index 0000000..7d27c14
> --- /dev/null
> +++ b/drivers/pci/dwc/Makefile
> @@ -0,0 +1,23 @@
> +obj-$(CONFIG_PCIE_DW) += pcie-designware.o
> +obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
> +obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
> +obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> +obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> +obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> +obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
> +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> +obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> +obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> +obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> +
> +# The following drivers are for devices that use the generic ACPI
> +# pci_root.c driver but don't support standard ECAM config access.
> +# They contain MCFG quirks to replace the generic ECAM accessors with
> +# device-specific ones that are shared with the DT driver.
> +
> +# The ACPI driver is generic and should not require driver-specific
> +# config options to be enabled, so we always build these drivers on
> +# ARM64 and use internal ifdefs to only build the pieces we need
> +# depending on whether ACPI, the DT driver, or both are enabled.
> +
> +obj-$(CONFIG_ARM64) += pcie-hisi.o
> diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> similarity index 100%
> rename from drivers/pci/host/pci-dra7xx.c
> rename to drivers/pci/dwc/pci-dra7xx.c
> diff --git a/drivers/pci/host/pci-exynos.c b/drivers/pci/dwc/pci-exynos.c
> similarity index 100%
> rename from drivers/pci/host/pci-exynos.c
> rename to drivers/pci/dwc/pci-exynos.c
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
> similarity index 100%
> rename from drivers/pci/host/pci-imx6.c
> rename to drivers/pci/dwc/pci-imx6.c
> diff --git a/drivers/pci/host/pci-keystone-dw.c b/drivers/pci/dwc/pci-keystone-dw.c
> similarity index 100%
> rename from drivers/pci/host/pci-keystone-dw.c
> rename to drivers/pci/dwc/pci-keystone-dw.c
> diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/dwc/pci-keystone.c
> similarity index 100%
> rename from drivers/pci/host/pci-keystone.c
> rename to drivers/pci/dwc/pci-keystone.c
> diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/dwc/pci-layerscape.c
> similarity index 100%
> rename from drivers/pci/host/pci-layerscape.c
> rename to drivers/pci/dwc/pci-layerscape.c
> diff --git a/drivers/pci/host/pcie-armada8k.c b/drivers/pci/dwc/pcie-armada8k.c
> similarity index 100%
> rename from drivers/pci/host/pcie-armada8k.c
> rename to drivers/pci/dwc/pcie-armada8k.c
> diff --git a/drivers/pci/host/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
> similarity index 100%
> rename from drivers/pci/host/pcie-artpec6.c
> rename to drivers/pci/dwc/pcie-artpec6.c
> diff --git a/drivers/pci/host/pcie-designware-plat.c b/drivers/pci/dwc/pcie-designware-plat.c
> similarity index 100%
> rename from drivers/pci/host/pcie-designware-plat.c
> rename to drivers/pci/dwc/pcie-designware-plat.c
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
> similarity index 100%
> rename from drivers/pci/host/pcie-designware.c
> rename to drivers/pci/dwc/pcie-designware.c
> diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
> similarity index 100%
> rename from drivers/pci/host/pcie-designware.h
> rename to drivers/pci/dwc/pcie-designware.h
> diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
> similarity index 100%
> rename from drivers/pci/host/pcie-hisi.c
> rename to drivers/pci/dwc/pcie-hisi.c
> diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
> similarity index 100%
> rename from drivers/pci/host/pcie-qcom.c
> rename to drivers/pci/dwc/pcie-qcom.c
> diff --git a/drivers/pci/host/pcie-spear13xx.c b/drivers/pci/dwc/pcie-spear13xx.c
> similarity index 100%
> rename from drivers/pci/host/pcie-spear13xx.c
> rename to drivers/pci/dwc/pcie-spear13xx.c
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 898d2c4..f7c1d4d 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -1,16 +1,6 @@
> menu "PCI host controller drivers"
> depends on PCI
>
> -config PCI_DRA7XX
> - bool "TI DRA7xx PCIe controller"
> - depends on OF && HAS_IOMEM && TI_PIPE3
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIE_DW
> - help
> - Enables support for the PCIe controller in the DRA7xx SoC. There
> - are two instances of PCIe controller in DRA7xx. This controller can
> - act both as EP and RC. This reuses the Designware core.
> -
> config PCI_MVEBU
> bool "Marvell EBU PCIe controller"
> depends on ARCH_MVEBU || ARCH_DOVE
> @@ -37,36 +27,6 @@ config PCIE_XILINX_NWL
> or End Point. The current option selection will only
> support root port enabling.
>
> -config PCIE_DW_PLAT
> - bool "Platform bus based DesignWare PCIe Controller"
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIE_DW
> - ---help---
> - This selects the DesignWare PCIe controller support. Select this if
> - you have a PCIe controller on Platform bus.
> -
> - If you have a controller with this interface, say Y or M here.
> -
> - If unsure, say N.
> -
> -config PCIE_DW
> - bool
> - depends on PCI_MSI_IRQ_DOMAIN
> -
> -config PCI_EXYNOS
> - bool "Samsung Exynos PCIe controller"
> - depends on SOC_EXYNOS5440
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIEPORTBUS
> - select PCIE_DW
> -
> -config PCI_IMX6
> - bool "Freescale i.MX6 PCIe controller"
> - depends on SOC_IMX6Q
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIEPORTBUS
> - select PCIE_DW
> -
> config PCI_TEGRA
> bool "NVIDIA Tegra PCIe controller"
> depends on ARCH_TEGRA
> @@ -103,27 +63,6 @@ config PCI_HOST_GENERIC
> Say Y here if you want to support a simple generic PCI host
> controller, such as the one emulated by kvmtool.
>
> -config PCIE_SPEAR13XX
> - bool "STMicroelectronics SPEAr PCIe controller"
> - depends on ARCH_SPEAR13XX
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIEPORTBUS
> - select PCIE_DW
> - help
> - Say Y here if you want PCIe support on SPEAr13XX SoCs.
> -
> -config PCI_KEYSTONE
> - bool "TI Keystone PCIe controller"
> - depends on ARCH_KEYSTONE
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIE_DW
> - select PCIEPORTBUS
> - help
> - Say Y here if you want to enable PCI controller support on Keystone
> - SoCs. The PCI controller on Keystone is based on Designware hardware
> - and therefore the driver re-uses the Designware core functions to
> - implement the driver.
> -
> config PCIE_XILINX
> bool "Xilinx AXI PCIe host bridge support"
> depends on ARCH_ZYNQ || MICROBLAZE
> @@ -150,15 +89,6 @@ config PCI_XGENE_MSI
> Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
> This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC.
>
> -config PCI_LAYERSCAPE
> - bool "Freescale Layerscape PCIe controller"
> - depends on OF && (ARM || ARCH_LAYERSCAPE)
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIE_DW
> - select MFD_SYSCON
> - help
> - Say Y here if you want PCIe controller support on Layerscape SoCs.
> -
> config PCI_VERSATILE
> bool "ARM Versatile PB PCI controller"
> depends on ARCH_VERSATILE
> @@ -217,27 +147,6 @@ config PCIE_ALTERA_MSI
> Say Y here if you want PCIe MSI support for the Altera FPGA.
> This MSI driver supports Altera MSI to GIC controller IP.
>
> -config PCI_HISI
> - depends on OF && ARM64
> - bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIEPORTBUS
> - select PCIE_DW
> - help
> - Say Y here if you want PCIe controller support on HiSilicon
> - Hip05 and Hip06 SoCs
> -
> -config PCIE_QCOM
> - bool "Qualcomm PCIe controller"
> - depends on ARCH_QCOM && OF
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIE_DW
> - select PCIEPORTBUS
> - help
> - Say Y here to enable PCIe controller support on Qualcomm SoCs. The
> - PCIe controller uses the Designware core plus Qualcomm-specific
> - hardware wrappers.
> -
> config PCI_HOST_THUNDER_PEM
> bool "Cavium Thunder PCIe controller to off-chip devices"
> depends on ARM64
> @@ -254,28 +163,6 @@ config PCI_HOST_THUNDER_ECAM
> help
> Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
>
> -config PCIE_ARMADA_8K
> - bool "Marvell Armada-8K PCIe controller"
> - depends on ARCH_MVEBU
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIE_DW
> - select PCIEPORTBUS
> - help
> - Say Y here if you want to enable PCIe controller support on
> - Armada-8K SoCs. The PCIe controller on Armada-8K is based on
> - Designware hardware and therefore the driver re-uses the
> - Designware core functions to implement the driver.
> -
> -config PCIE_ARTPEC6
> - bool "Axis ARTPEC-6 PCIe controller"
> - depends on MACH_ARTPEC6
> - depends on PCI_MSI_IRQ_DOMAIN
> - select PCIE_DW
> - select PCIEPORTBUS
> - help
> - Say Y here to enable PCIe controller support on Axis ARTPEC-6
> - SoCs. This PCIe controller uses the DesignWare core.
> -
> config PCIE_ROCKCHIP
> bool "Rockchip PCIe controller"
> depends on ARCH_ROCKCHIP || COMPILE_TEST
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index bfe3179..4d36866 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -1,8 +1,3 @@
> -obj-$(CONFIG_PCIE_DW) += pcie-designware.o
> -obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
> -obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
> -obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> -obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
> obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
> obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
> @@ -11,12 +6,9 @@ obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
> obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
> obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
> obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
> -obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> -obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
> obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
> obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
> obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
> -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
> obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
> obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
> @@ -24,9 +16,6 @@ obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
> obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
> obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
> obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
> -obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> -obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> -obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
> obj-$(CONFIG_VMD) += vmd.o
>
> @@ -40,7 +29,6 @@ obj-$(CONFIG_VMD) += vmd.o
> # ARM64 and use internal ifdefs to only build the pieces we need
> # depending on whether ACPI, the DT driver, or both are enabled.
>
> -obj-$(CONFIG_ARM64) += pcie-hisi.o
> obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
> obj-$(CONFIG_ARM64) += pci-thunder-pem.o
> obj-$(CONFIG_ARM64) += pci-xgene.o
>
next prev parent reply other threads:[~2017-01-04 16:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-04 12:08 [PATCH v2] PCI: add a new directory for designware core Kishon Vijay Abraham I
2017-01-04 16:51 ` Joao Pinto [this message]
2017-01-04 17:54 ` Jingoo Han
2017-01-05 1:07 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=802c0889-17ba-5fa9-a68b-ecbd0e198be5@synopsys.com \
--to=joao.pinto@synopsys.com \
--cc=bhelgaas@google.com \
--cc=jingoohan1@gmail.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox